Search Results (6)

Cultivating crops in the hot, arid conditions of the Arabian Peninsula often requires irrigation with brackish water, which exposes plants to salinity and heat stress. Timely, cost-effective monitoring of plant health can significantly enhance crop management. In this context, remote sensing techniques offer promising alternatives. This study evaluates several low-cost, ground-level remote sensing methods and compares them with benchmark analytical techniques for assessing salt stress in two economically important woody species, moringa and pomegranate. The species were irrigated under three salinity levels: low (2 dS m⁻¹), medium (5 dS m⁻¹), and high (10 dS m⁻¹). Remote sensing tools included RGB, multispectral, and thermal cameras mounted on selfie sticks for canopy imaging, as well as portable leaf pigment and chlorophyll fluorescence meters. Analytical benchmarks included sodium (Na) accumulation, carbon isotope composition (δ¹³C), and nitrogen (N) concentration in leaf dry matter. As salinity increased from low to medium, canopy temperatures, vegetation indices, and δ¹³C values rose. However, increasing salinity from medium to high levels led to a rise in Na accumulation without further significant changes in other remote sensing and analytical parameters. In moringa and across the three salinity levels, the Normalized Difference Red Edge (NDRE) and leaf chlorophyll content on an area basis showed significant correlations with δ¹³C (r = 0.758, p < 0.001; r = 0.423, p < 0.05) and N (r = 0.482, p < 0.01; r = 0.520, p < 0.01). In pomegranate, the Normalized Difference Vegetation Index (NDVI) and chlorophyll were strongly correlated with δ¹³C (r = 0.633, p < 0.01 and r = 0.767, p < 0.001) and N (r = 0.832, p < 0.001 and r = 0.770, p < 0.001). Remote sensing was particularly effective at detecting plant responses between low and medium salinity, with stronger correlations observed in pomegranate. Full article

The productivity of wheat in the Mediterranean region is under threat due to climate-change-related environmental factors, including fungal diseases that can negatively impact wheat yield and quality. Wheat phenotyping tools utilizing affordable, high-throughput plant phenotyping (HTPP) techniques, such as aerial and ground RGB images and quick canopy and leaf sensors, can aid in assessing crop status and selecting tolerant wheat varieties. This study focused on the impact of fungal diseases on wheat productivity in the Mediterranean region, considering the need for a precise selection of tolerant wheat varieties. This research examined the use of affordable HTPP methods, including imaging and active multispectral sensors, to aid in crop management for improved wheat health and to support commercial field phenotyping programs. This study evaluated 40 advanced lines of bread wheat (Triticum aestivum L.) at five locations across northern Spain, comparing fungicide-treated and untreated blocks under fungal disease pressure (Septoria, brown rust, and stripe rust observed). Measurements of leaf-level pigments and canopy vegetation indexes were taken using portable sensors, field cameras, and imaging sensors mounted on unmanned aerial vehicles (UAVs). Significant differences were observed in Dualex flavonoids and the nitrogen balance index (NBI) between treatments in some locations (p < 0.001 between Elorz and Ejea). Measurements of canopy vigor and color at the plot level showed significant differences between treatments at all sites, highlighting indexes such as the green area (GA), crop senescence index (CSI), and triangular greenness index (TGI) in assessing the effects of fungicide treatments on different wheat cultivars. RGB vegetation indexes from the ground and UAV were highly correlated (r = 0.817 and r = 0.810 for TGI and NGRDI). However, the Greenseeker NDVI sensor was found to be more effective in estimating grain yield and protein content (R² = 0.61–0.7 and R² = 0.45–0.55, respectively) compared to the aerial AgroCam GEO NDVI (R² = 0.25–0.35 and R² = 0.12–0.21, respectively). We suggest as a practical consideration the use of the GreenSeeker NDVI as more user-friendly and less affected by external environmental factors. This study emphasized the throughput benefits of RGB UAV HTPPs with the high similarity between ground and aerial results and highlighted the potential for HTPPs in supporting the selection of fungal-disease-resistant bread wheat varieties. Full article

Proximal remote sensing devices are novel tools that enable the study of plant health status through the measurement of specific characteristics, including the color or spectrum of light reflected or transmitted by the leaves or the canopy. The aim of this study is to compare the RGB and multispectral data collected during five years (2016–2020) of four fruiting vegetables (melon, tomato, eggplant, and peppers) with trial treatments of non-grafted and grafted onto resistant rootstocks cultivated in a Meloidogyne incognita (a root-knot nematode) infested soil in a greenhouse. The proximal remote sensing of plant health status data collected was divided into three levels. Firstly, leaf level pigments were measured using two different handheld sensors (SPAD and Dualex). Secondly, canopy vigor and biomass were assessed using vegetation indices derived from RGB images and the Normalized Difference Vegetation Index (NDVI) measured with a portable spectroradiometer (Greenseeker). Third, we assessed plant level water stress, as a consequence of the root damage by nematodes, using stomatal conductance measured with a porometer and indirectly using plant temperature with an infrared thermometer, and also the stable carbon isotope composition of leaf dry matter.. It was found that the interaction between treatments and crops (ANOVA) was statistically different for only four of seventeen parameters: flavonoid (p < 0.05), NBI (p < 0.05), NDVI (p < 0.05) and the RGB CSI (Crop Senescence Index) (p < 0.05). Concerning the effect of treatments across all crops, differences existed only in two parameters, which were flavonoid (p < 0.05) and CSI (p < 0.001). Grafted plants contained fewer flavonoids ($\overline{\mathrm{x}}$ = 1.37) and showed lower CSI ($\overline{\mathrm{x}}$ = 11.65) than non-grafted plants ($\overline{\mathrm{x}}$ = 1.98 and $\overline{\mathrm{x}}$ = 17.28, respectively, p < 0.05 and p < 0.05) when combining all five years and four crops. We conclude that the grafted plants were less stressed and more protected against nematode attack. Leaf flavonoids content and the CSI index were robust indicators of root-knot nematode impacts across multiple crop types. Full article

The systematic use of plant protection products is now being called into question with the growing awareness of the risks they can represent for the environment and human health. The application of precision agriculture technologies helps to improve agricultural production but also to rationalize input costs and improve ecological footprints. Here we present a study on fungicide application efficiency and its impact on the grass quality of a golf course green using the free open-source image analysis software FIJI (Image J) to analyze ground RGB (high-resolution digital cameras) and multispectral aerial imagery in combination with experimental data of spray pressure and hydraulic slot nozzle size of a boom sprayer machine. The multivariate regression model best explained variance in the normalized green-red difference index (NGRDI) as a relevant indicator of healthy turfgrass fields from the aerial, ground, and machine data set. Full article

The use of satellites to monitor crops and support their management is gathering increasing attention. The improved temporal, spatial, and spectral resolution of the European Space Agency (ESA) launched Sentinel-2 A + B twin platform is paving the way to their popularization in precision agriculture. Besides the Sentinel-2 A + B constellation technical features the open-access nature of the information they generate, and the available support software are a significant improvement for agricultural monitoring. This paper was motivated by the challenges faced by researchers and agrarian institutions entering this field; it aims to frame remote sensing principles and Sentinel-2 applications in agriculture. Thus, we reviewed the features and uses of Sentinel-2 in precision agriculture, including abiotic and biotic stress detection, and agricultural management. We also compared the panoply of satellites currently in use for land remote sensing that are relevant for agriculture to the Sentinel-2 A + B constellation features. Contrasted with previous satellite image systems, the Sentinel-2 A + B twin platform has dramatically increased the capabilities for agricultural monitoring and crop management worldwide. Regarding crop stress monitoring, Sentinel-2 capacities for abiotic and biotic stresses detection represent a great step forward in many ways though not without its limitations; therefore, combinations of field data and different remote sensing techniques may still be needed. We conclude that Sentinel-2 has a wide range of useful applications in agriculture, yet still with room for further improvements. Current and future ways that Sentinel-2 can be utilized are also discussed. Full article

Ear density is one of the most important agronomical yield components in wheat. Ear counting is time-consuming and tedious as it is most often conducted manually in field conditions. Moreover, different sampling techniques are often used resulting in a lack of standard protocol, which may eventually affect inter-comparability of results. Thermal sensors capture crop canopy features with more contrast than RGB sensors for image segmentation and classification tasks. An automatic thermal ear counting system is proposed to count the number of ears using zenithal/nadir thermal images acquired from a moderately high resolution handheld thermal camera. Three experimental sites under different growing conditions in Spain were used on a set of 24 varieties of durum wheat for this study. The automatic pipeline system developed uses contrast enhancement and filter techniques to segment image regions detected as ears. The approach is based on the temperature differential between the ears and the rest of the canopy, given that ears usually have higher temperatures due to their lower transpiration rates. Thermal images were acquired, together with RGB images and in situ (i.e., directly in the plot) visual ear counting from the same plot segment for validation purposes. The relationship between the thermal counting values and the in situ visual counting was fairly weak (R² = 0.40), which highlights the difficulties in estimating ear density from one single image-perspective. However, the results show that the automatic thermal ear counting system performed quite well in counting the ears that do appear in the thermal images, exhibiting high correlations with the manual image-based counts from both thermal and RGB images in the sub-plot validation ring (R² = 0.75–0.84). Automatic ear counting also exhibited high correlation with the manual counting from thermal images when considering the complete image (R² = 0.80). The results also show a high correlation between the thermal and the RGB manual counting using the validation ring (R² = 0.83). Methodological requirements and potential limitations of the technique are discussed. Full article