Search Results (3)

Improving photovoltaic systems in terms of temporal responsiveness, lowering steady-state ripples, high efficiency, low complexity, and decreased tracking time under various circumstances is becoming increasingly important. A particle-swarm optimizer (PSO) is frequently used for maximum power-point tracking (MPPT) of photovoltaic (PV) energy systems. However, during partial-shadowing circumstances (PSCs), this technique has three major drawbacks. The first problem is that it slowly converges toward the maximum power point (MPP). The second issue is that the PSO is a time-invariant optimizer; therefore, when there is a time-variable shadow pattern (SP), it adheres to the first global peak instead of following the dynamic global peak (GP). The third problem is the high oscillation around the steady state. Therefore, this article proposes a hybrid PSO-PID algorithm for solving the PSO’s three challenges described above and improving the PV system’s performance under uniform irradiance and PSCs. The PID is designed to work with the PSO algorithm to observe the maximum voltage that is calculated by subtracting from the output voltage of the DC-DC boost converter and sending the variation to a PID controller, which reduces the error percentage obtained by conventional PSO and increases system efficiency by providing the precise converter-duty cycle value. The proposed hybrid PSO-PID approach is compared with a conventional PSO and bat algorithms (BAs) to show its superiority, which has the highest tracking efficiency (99.97%), the lowest power ripples (5.9 W), and the fastest response time (0.002 s). The three aforementioned issues can be successfully solved using the hybrid PSO-PID technique; it also offers good performance with shorter times and faster convergence to the dynamic GP. The results show that the developed PID is useful in enhancing the conventional PSO algorithm and solar-system performance. Full article

Fault location is one of the main challenges in the distribution network due to its expanse and complexity. Today, with the advent of phasor measurement units (PMU), various techniques for fault location using these devices have been proposed. In this research, distribution network fault location is defined as an optimization problem, and the network fault location is determined by solving it. This is done by combining PMU data before and after the fault with the power system status estimation (PSSE) problem. Two new objective functions are designed to identify the faulty section and fault location based on calculating the voltage difference between the two ends of the grid lines. In the proposed algorithm, the purpose of combining the PMU in the PSSE problem is to estimate the voltage and current quantities at the branch point and the total network nodes after the fault occurs. Branch point quantities are calculated using the PMU and the governing equations of the π line model for each network section, and the faulty section is identified based on a comparison of the resulting values. The advantages of the proposed algorithm include simplicity, step-by-step implementation, efficiency in conditions of different branch specifications, application for various types of faults including short-circuit and series, and its optimal accuracy compared to other methods. Finally, the proposed algorithm has been implemented on the IEEE 123-node distribution feeder and its performance has been evaluated for changes in various factors including fault resistance, type of fault, angle of occurrence of a fault, uncertainty in loading states, and PMU measurement error. The results show the appropriate accuracy of the proposed algorithm showing that it was able to determine the location of the fault with a maximum error of 1.21% at a maximum time of 23.87 s. Full article

Solar photovoltaic (PV) deployment is rapidly expanding around the world. However, the soiling factor has an impact on its performance. Saudi Arabia has high solar irradiation and plans to diversify its energy mix for electricity generation by deploying more solar PV across the country. However, it is located in an arid and desert environment, making it a challenging project due to dust accumulation on solar modules. The soiling and PV performance in Saudi Arabia are examined in this paper. Furthermore, it highlights several mitigation techniques that can be used to maintain PV performance through preventive and restorative measures. Furthermore, this study looks into the size and characterization of dust in Saudi Arabia, as well as the entire life cycle of dust accumulation on PV modules. In this review study, the performance of solar PV systems is evaluated under soiling in different regions of Saudi Arabia. Depending on the local environment and other factors, the PV performance has been reduced by somewhere between 2% and 50%. A single sandstorm reduced the module power output by 20%. As revealed in Dhahran, the PV module was exposed to an outdoor environment and not cleaned for 6 months resulting in a power drop of more than 50%. It is strongly advised to clean PV panels once a month or fewer to maintain a high-performance system. However, in the event of a dust storm, it is advised to clean the system immediately to avoid a major decline in PV performance. The bi-facial PV solar panels technology associated with solar trackers and utilizing robotic cleaning systems have maximized the received solar irradiation and minimized the soiling loss efficiently. The most common elements found in dust particles are primarily derived from the natural desert. It has been noted that the composition and sizes of dust particles depend heavily on the location of the PV module. It is concluded that dust accumulation and cleaning costs are not a significant barrier to large-scale, cost-effective solar PV deployments in Saudi Arabia, particularly in the central region, which is considered a high-suitable region for utility-size PV plants due to many factors. The results of this study are essential for enlightening the PV engineering community, investors, and the research community about how soiling may affect regions with significant solar potential, such as Saudi Arabia, and what potential soiling mitigation strategies may be considered to maintain high-performance solar PV projects. Full article