Search Results (2)

The development of advanced thermal barrier coating (TBC) materials with better hot corrosion resistance, phase stability, and residual stresses is an emerging research area in the aerospace industry. In the present study, four kinds of TBCs, namely, single-layer yttria-stabilized zirconia (YSZ), single-layer gadolinium zirconate (GZ), bilayer gadolinium zirconate/yttria-stabilized zirconia (YSZ/GZ), and a multilayer functionally graded coating (FGC) of YSZ and GZ, were deposited on NiCrAlY bond-coated nickel-based superalloy (Inconel 718) substrates using the atmospheric plasma spray technique. The hot corrosion behavior of the coatings was tested by applying a mixture of Na₂SO₄ and V₂O₅ onto the surface of TBC, followed by isothermal heat treatment at 1273 K for 50 h. The characterization of the corroded samples was performed by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) to identify physical and chemical changes in the coatings. GIXRD was used to analyze the residual stresses of the coatings. Residual stress in the FGC coating was found to be −15.2 ± 10.6 MPa. The wear resistance of TBCs is studied using a linear reciprocating tribometer, and the results indicate that gadolinium zirconate-based TBCs showed better performance when deposited in bilayer and multilayered functionally graded TBC systems. The wear rate of as-coated FGC coatings was determined to be 2.90 × 10⁻⁴ mm³/Nm, which is lower than the conventional YSZ coating. Full article

Hard and wear-resistant coatings created utilizing physical vapor deposition (PVD) techniques are extensively used in extreme tribological applications. The friction and wear behavior of coatings vary significantly with temperature, indicating that advanced coating concepts are essential for prolonged load-bearing applications. Many coating concepts have recently been explored in this area, including multicomponent, multilayer, gradient coatings; high entropy alloy (HEA) nitride; and functionally modified coatings. In this review, we highlighted the most significant findings from ongoing research to comprehend crucial coating properties and design aspects. To obtain enhanced tribological properties, the microstructure, composition, residual stress, hardness, and HT oxidation resistance are tuned through doping or addition of appropriate materials at an optimized level into the primary coatings. Such improvements are achieved by optimizing PVD process parameters such as input power, partial pressure, reactive gas flow rates, substrate bias, and temperature. The incorporation of ideal amounts of Si, Cr, Mo, W, Ag, and Cu into ternary and quaternary coatings, as well as unique multilayer designs, considerably increases the tribological performance of the coatings. Recent discoveries show that not only mechanical hardness and fracture toughness govern wear resistance, but also that oxidation at HT plays a significant role in the lubrication or wear failure of coatings. The tribo-induced metal oxides and/or Magnéli phases concentrated in the tribolayer are the key governing factors of friction and wear behavior at high temperatures. This review includes detailed insights into the advancements in wear resistance as well as various failure mechanisms associated with temperature changes. Full article