We are pleased to invite you to read the selected papers in Polymers (ISSN: 2073-4360) in the Section “Polymer Composites and Nanocomposites”. The paper list is as follows:

1. “Reinforced Epoxy Composites Modified with Functionalized Graphene Oxide”
by Anton Mostovoy, Andrey Shcherbakov, Andrey Yakovlev, Sergey Arzamastsev and Marina Lopukhova
Polymers 2022, 14(2), 338; https://doi.org/10.3390/polym14020338
Available online: https://www.mdpi.com/2073-4360/14/2/338

2. “The Effect of Agglomeration on the Electrical and Mechanical Properties of Polymer Matrix Nanocomposites Reinforced with Carbon Nanotubes”
by Sebastian Tamayo-Vegas , Ali Muhsan, Chang Liu, Mostapha Tarfaoui and Khalid Lafdi
Polymers 2022, 14(9), 1842; https://doi.org/10.3390/polym14091842
Available online: https://www.mdpi.com/2073-4360/14/9/1842

3. “Investigation of Mechanical Behaviors of Functionally Graded CNT-Reinforced Composite Plates”
by Jin-Rae Cho and Young-Ju Ahn
Polymers 2022, 14(13), 2664; https://doi.org/10.3390/polym14132664
Available online: https://www.mdpi.com/2073-4360/14/13/2664

4. “Effects of Amino Hyperbranched Polymer-Modified Carbon Nanotubes on the Crystallization Behavior of Poly (L-Lactic Acid) (PLLA)”
by Bofan Shen, Shulai Lu, Chunfu Sun, Zhenbiao Song, Fuyi Zhang, Jian Kang, Ya Cao and Ming Xiang
Polymers 2022, 14(11), 2188; https://doi.org/10.3390/polym14112188
Available online: https://www.mdpi.com/2073-4360/14/11/2188

5. “Influence of Ionomer and Cyanuric Acid on Antistatic, Mechanical, Thermal, and Rheological Properties of Extruded Carbon Nanotube (CNT)/Polyoxymethylene (POM) Nanocomposites”
by Sang-Seok Yun, Dong-hyeok Shin and Keon-Soo Jang
Polymers 2022, 14(9), 1849; https://doi.org/10.3390/polym14091849
Available online: https://www.mdpi.com/2073-4360/14/9/1849

6. “Immobilization of Air-Stable Copper Nanoparticles on Graphene Oxide Flexible Hybrid Films for Smart Clothes”
by Peng-Yang Huang, Chen-Yang Huang, Jia-Wun Li, Sheng-Yen Shen, Chih-Chia Cheng, Chih-Wei Chiu, Ru-Jong Jeng and Jiang-Jen Lin
Polymers 2022, 14(2), 237; https://doi.org/10.3390/polym14020237
Available online: https://www.mdpi.com/2073-4360/14/2/237

7. “Influence of CNT Length on Dispersion, Localization, and Electrical Percolation in a Styrene-Butadiene-Based Star Block Copolymer”
by Ulrike Staudinger, Andreas Janke, Christine Steinbach, Uta Reuter, Martin Ganß and Oliver Voigt
Polymers 2022, 14(13), 2715; https://doi.org/10.3390/polym14132715
Available online: https://www.mdpi.com/2073-4360/14/13/2715

8. “Bio-Based Rigid Polyurethane Foams Modified with C-MOF/MWCNTs and TBPBP as Building Insulation Materials: Synergistic Effect and Corresponding Mechanism for Enhancing Fire and Smoke Safety”
by Guangxu Bo, Xiaoling Xu, Xiaoke Tian, Jinyong Yan, Xingjian Su and Yunjun Yan
Polymers 2022, 14(17), 3630; https://doi.org/10.3390/polym14173630
Available online: https://www.mdpi.com/2073-4360/14/17/3630

9. “Nonwoven Mats Based on Segmented Biopolyurethanes Filled with MWCNT Prepared by Solution Blow Spinning”
by Pablo Ramos, Tamara Calvo-Correas, Arantxa Eceiza and Javier González-Benito
Polymers 2022, 14(19), 4175; https://doi.org/10.3390/polym14194175
Available online: https://www.mdpi.com/2073-4360/14/19/4175

10. “p-Type PVA/MWCNT-Sb₂Te₃ Composites for Application in Different Types of Flexible Thermoelectric Generators in Combination with n-Type PVA/MWCNT-Bi₂Se₃ Composites”
by Jana Andzane, Krisjanis Buks, Juris Bitenieks, Lasma Bugovecka, Artis Kons, Remo Merijs-Meri, Janis Svirksts, Janis Zicans and Donats Erts
Polymers 2022, 14(23), 5130; https://doi.org/10.3390/polym14235130
Available online: https://www.mdpi.com/2073-4360/14/23/5130

You can check all publications in the Section “Polymer Composites and Nanocomposites” at the following link: https://www.mdpi.com/search?journal=polymers&section=1174.