We would like to invite you to read our collection of selected papers in Polymers (ISSN: 2073-4360), published in the “Polymer Fibers” Section, which are listed below:

1. “Fabrication of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) Fibers Using Centrifugal Fiber Spinning: Structure, Properties and Application Potential”
by Chris Vanheusden, Jan Vanminsel, Naveen Reddy, Pieter Samyn, Jan D’Haen, Roos Peeters, Anitha Ethirajan and Mieke Buntinx
Polymers 2023, 15(5), 1181; https://doi.org/10.3390/polym15051181
Available online: https://www.mdpi.com/2073-4360/15/5/1181

2. “Facile One-Step Electrospinning Process to Prepare AgNPs-Loaded PLA and PLA/PEO Mats with Antibacterial Activity”
by Valeria Allizond, Giuliana Banche, Matteo Salvoni, Mery Malandrino, Claudio Cecone, Anna Maria Cuffini and Pierangiola Bracco
Polymers 2023, 15(6), 1470; https://doi.org/10.3390/polym15061470
Available online: https://www.mdpi.com/2073-4360/15/6/1470

3. “Investigation on the Mechanical Recycling of Carbon Fiber-Reinforced Polymers by Peripheral Down-Milling”
by Massimo Durante, Luca Boccarusso, Dario De Fazio, Antonio Formisano and Antonio Langella
Polymers 2023, 15(4), 854; https://doi.org/10.3390/polym15040854
Available online: https://www.mdpi.com/2073-4360/15/4/854

4. “Sustainable Cement Composite Integrating Waste Cellulose Fibre: A Comprehensive Review”
by Sarah Fernando, Chamila Gunasekara, Amin Shahpasandi, Kate Nguyen, Massoud Sofi, Sujeeva Setunge, Priyan Mendis and Md. Tareq Rahman
Polymers 2023, 15(3), 520; https://doi.org/10.3390/polym15030520
Available online: https://www.mdpi.com/2073-4360/15/3/520

5. “The Hypervelocity Impact Behavior and Energy Absorption Evaluation of Fabric”
by Huadong Xu, Dong Yu, Jiaxin Cui, Zhixin Shi, Di Song and Changqing Miao
Polymers 2023, 15(6), 1547; https://doi.org/10.3390/polym15061547
Available online: https://www.mdpi.com/2073-4360/15/6/1547

6. “Optimization of Electrospinning Parameters for Lower Molecular Weight Polymers: A Case Study on Polyvinylpyrrolidone”
by Fatima Tuz Zahra, Ying Zhang, Adeolu Oluwaseun Ajayi, Quincy Quick and Richard Mu
Polymers 2024, 16(9), 1217; https://doi.org/10.3390/polym16091217
Available online: https://www.mdpi.com/2073-4360/16/9/1217

7. “A Finite Element Method for Determining the Mechanical Properties of Electrospun Nanofibrous Mats”
by Jaymin Vrajlal Sanchaniya, Inga Lasenko, Valters Gobins, Alaa Kobeissi and Dmitri Goljandin
Polymers 2024, 16(6), 852; https://doi.org/10.3390/polym16060852
Available online: https://www.mdpi.com/2073-4360/16/6/852

8. “Exploring the Potential Applications of Wool Fibers in Composite Materials: A Review”
by Alessia Patrucco, Marina Zoccola and Anastasia Anceschi
Polymers 2024, 16(16), 2360; https://doi.org/10.3390/polym16162360
Available online: https://www.mdpi.com/2073-4360/16/16/2360

9. “Bacterial Adhesion to Natural and Synthetic Fibre-Forming Polymers: Influence of Material Properties”
by Nina Čuk, Barbara Simončič, Rok Fink and Brigita Tomšič
Polymers 2024, 16(17), 2409; https://doi.org/10.3390/polym16172409
Available online: https://www.mdpi.com/2073-4360/16/17/2409

10. “Laboratory and Numerical Investigation of Pre-Tensioned Reinforced Concrete Railway Sleepers Combined with Plastic Fiber Reinforcement”
by Attila Németh, Sarah Khaleel Ibrahim, Majid Movahedi Rad, Szabolcs Szalai, Zoltán Major, Szabolcs Kocsis Szürke, Vivien Jóvér, Mykola Sysyn, Dmytro Kurhan, Dániel Harrach et al.
Polymers 2024, 16(11), 1498; https://doi.org/10.3390/polym16111498
Available online: https://www.mdpi.com/2073-4360/16/11/1498