Next Article in Journal
Evaluation of Complications and Marginal Bone Loss Observed in Prosthetic Restorations Applied to Different Implant Abutment Connection Types: A Retrospective Study
Previous Article in Journal
Biomechanical Evaluation of PEEK and PLA Composite Femoral Implants for Stress Shielding Reduction: A Finite Element Simulation Study
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Noè et al. Emergence Profile Creation with CAD Technology on Vertical Edgeless Preparation (VEP). Prosthesis 2023, 5, 1369–1381

1
Department of Medicine and Surgery, Dental School, University of Parma, Via Gramsci 14, 43126 Parma, Italy
2
Private Practice, Piazza di Porta Mascarella 7, 40126 Bologna, Italy
3
Private Practice, Via Vittorio Veneto 99, 19121 La Spezia, Italy
*
Author to whom correspondence should be addressed.
Prosthesis 2025, 7(3), 45; https://doi.org/10.3390/prosthesis7030045
Submission received: 24 March 2025 / Accepted: 25 March 2025 / Published: 28 April 2025
The authors would like to make the following corrections to the published paper [1]:
Adding the Institutional Review Board Statement and Informed Consent Statement to the back matter:
  • Institutional Review Board Statement: This study was conducted in accordance with the Declaration of Helsinki and approved by the Institutional Review Board of the Dental School, University of Parma: approval code, PRDE2023-103; approval date, 15 March 2023.
  • Informed Consent Statement: Informed consent was obtained from all subjects involved in the study.

Reference

  1. Noè, G.; Toffoli, A.; Bonfiglioli, R.; Foce, E.; Bianchi, E.; Macaluso, G.M.; Manfredi, E. Emergence Profile Creation with CAD Technology on Vertical Edgeless Preparation (VEP). Prosthesis 2023, 5, 1369–1381. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Noè, G.; Toffoli, A.; Bonfiglioli, R.; Foce, E.; Bianchi, E.; Macaluso, G.M.; Manfredi, E. Correction: Noè et al. Emergence Profile Creation with CAD Technology on Vertical Edgeless Preparation (VEP). Prosthesis 2023, 5, 1369–1381. Prosthesis 2025, 7, 45. https://doi.org/10.3390/prosthesis7030045

AMA Style

Noè G, Toffoli A, Bonfiglioli R, Foce E, Bianchi E, Macaluso GM, Manfredi E. Correction: Noè et al. Emergence Profile Creation with CAD Technology on Vertical Edgeless Preparation (VEP). Prosthesis 2023, 5, 1369–1381. Prosthesis. 2025; 7(3):45. https://doi.org/10.3390/prosthesis7030045

Chicago/Turabian Style

Noè, Gaetano, Andrea Toffoli, Roberto Bonfiglioli, Edoardo Foce, Edoardo Bianchi, Guido Maria Macaluso, and Edoardo Manfredi. 2025. "Correction: Noè et al. Emergence Profile Creation with CAD Technology on Vertical Edgeless Preparation (VEP). Prosthesis 2023, 5, 1369–1381" Prosthesis 7, no. 3: 45. https://doi.org/10.3390/prosthesis7030045

APA Style

Noè, G., Toffoli, A., Bonfiglioli, R., Foce, E., Bianchi, E., Macaluso, G. M., & Manfredi, E. (2025). Correction: Noè et al. Emergence Profile Creation with CAD Technology on Vertical Edgeless Preparation (VEP). Prosthesis 2023, 5, 1369–1381. Prosthesis, 7(3), 45. https://doi.org/10.3390/prosthesis7030045

Article Metrics

Back to TopTop