Next Article in Journal
Design and Testing of a 2D Optical Fiber Sensor for Building Tilt Monitoring Based on Fiber Bragg Gratings
Article Menu
Issue 1 (March) cover image

Export Article

Open AccessEditorial
Appl. Syst. Innov. 2018, 1(1), 1;

Introduction to a New Journal: Applied System Innovation

School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332-0245, USA
Department of Electrical Engineering, National Cheng Kung University, Tainan 701, Taiwan
Department of Electronic Engineering, National Formosa University, Yunlin 632, Taiwan
Graduate School of Information Science and Technology, Hokkaido University, Hokkaido 060-0808, Japan
Author to whom correspondence should be addressed.
Received: 15 August 2017 / Accepted: 28 August 2017 / Published: 5 September 2017
Full-Text   |   PDF [199 KB, uploaded 25 December 2017]
Note: In lieu of an abstract, this is an excerpt from the first page.


In the modern technological society, engineers and designers must work together with a variety of other professions in their quest to find systematic solutions to complex problems.[...] View Full-Text
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).

Share & Cite This Article

MDPI and ACS Style

Li, M.; Chang, S.-J.; Meen, T.-H.; Yamamoto, T. Introduction to a New Journal: Applied System Innovation. Appl. Syst. Innov. 2018, 1, 1.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Metrics

Article Access Statistics



[Return to top]
Appl. Syst. Innov. EISSN 2571-5577 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top