Order Article Reprints

de Oliveira D, Gonçalves MV, Ribeiro GM, da Costa ALS, Regueiras L, Silva T, de Jesus A, Malcher L, Ziberov M. On the Use of Compressed Air and Synthetic Biodegradable Cutting Fluid to Enhance the Surface Quality of WAAM–CMT Manufactured Low-Alloy Steel Parts During Post-Processing Milling with Different Cooling–Lubrication Strategies. Journal of Manufacturing and Materials Processing. 2025; 9(6):193. https://doi.org/10.3390/jmmp9060193

de Oliveira, Déborah, Marcos Vinícius Gonçalves, Guilherme Menezes Ribeiro, André Luis Silva da Costa, Luis Regueiras, Tiago Silva, Abílio de Jesus, Lucival Malcher, and Maksym Ziberov. 2025. "On the Use of Compressed Air and Synthetic Biodegradable Cutting Fluid to Enhance the Surface Quality of WAAM–CMT Manufactured Low-Alloy Steel Parts During Post-Processing Milling with Different Cooling–Lubrication Strategies" Journal of Manufacturing and Materials Processing 9, no. 6: 193. https://doi.org/10.3390/jmmp9060193

de Oliveira, D., Gonçalves, M. V., Ribeiro, G. M., da Costa, A. L. S., Regueiras, L., Silva, T., de Jesus, A., Malcher, L., & Ziberov, M. (2025). On the Use of Compressed Air and Synthetic Biodegradable Cutting Fluid to Enhance the Surface Quality of WAAM–CMT Manufactured Low-Alloy Steel Parts During Post-Processing Milling with Different Cooling–Lubrication Strategies. Journal of Manufacturing and Materials Processing, 9(6), 193. https://doi.org/10.3390/jmmp9060193