Next Article in Journal / Special Issue
An Iterative Size Effect Model of Surface Generation in Finish Machining
Previous Article in Journal
Surface Integrity of AISI 52100 Bearing Steel after Robot-Based Machine Hammer Peening
Previous Article in Special Issue
Characterization and Modeling of Surface Roughness and Burr Formation in Slot Milling of Polycarbonate
 
 
Article

Article Versions Notes

J. Manuf. Mater. Process. 2020, 4(3), 62; https://doi.org/10.3390/jmmp4030062
Action Date Notes Link
article pdf uploaded. 2 July 2020 11:49 CEST Version of Record -
article pdf uploaded. 2 July 2020 11:49 CEST Updated version of record -
article xml file uploaded 2 July 2020 12:47 CEST Original file -
article xml uploaded. 2 July 2020 12:47 CEST Update https://www.mdpi.com/2504-4494/4/3/62/xml
article pdf uploaded. 2 July 2020 12:47 CEST Updated version of record https://www.mdpi.com/2504-4494/4/3/62/pdf
article html file updated 2 July 2020 12:48 CEST Original file -
article html file updated 21 July 2022 22:49 CEST Update https://www.mdpi.com/2504-4494/4/3/62/html
Back to TopTop