Next Article in Journal
Melt Granulation in Fluidised Bed: Screening of the Process Variables by Factorial Design
Previous Article in Journal
Simulation of Particles with Different Coefficient of Restitution in Fluid Bed Coater
Article Menu

Article Versions

Export Article

Scientia Pharmaceutica is published by MDPI from Volume 84 Issue 3 (2016). Articles in this Issue were published by another publisher in Open Access under a CC-BY (or CC-BY-NC-ND) licence. Articles are hosted by MDPI on mdpi.com as a courtesy and upon agreement with Austrian Pharmaceutical Society (Österreichische Pharmazeutische Gesellschaft, ÖPhG).
Open AccessConference Report
Sci. Pharm. 2010, 78(3), 646; https://doi.org/10.3797/scipharm.cespt.8.PMS19 (registering DOI)

An Investigation into the Use of Polyox® as the Binding and Coating Agent in Fluidized-Bed Apparatus

Department of Pharmaceutical Technology, Faculty of Pharmacy, University of Belgrade, Serbia
*
Author to whom correspondence should be addressed.
Received: 12 July 2010 / Accepted: 12 July 2010 / Published: 12 July 2010
PDF [128 KB, uploaded 10 October 2016]

Abstract

Purpose: The aim of this study was to investigate the possibility of using Polyox® as the binding and/or coating agent for paracetamol sustained release formulation development. [...]
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).

Share & Cite This Article

MDPI and ACS Style

STOJKOVIC, A.; MASIC, I.; PAROJCIC, J.; DJURIC, Z. An Investigation into the Use of Polyox® as the Binding and Coating Agent in Fluidized-Bed Apparatus. Sci. Pharm. 2010, 78, 646.

Show more citation formats Show less citations formats

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Sci. Pharm. EISSN 2218-0532 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top