Scientia Pharmaceutica is published by MDPI from Volume 84 Issue 3 (2015).
Articles in this Issue were published by another publisher in Open Access under a CC-BY (or CC-BY-NC-ND) licence.
Articles are hosted by MDPI on mdpi.com as a courtesy and upon agreement with Austrian Pharmaceutical Society (Österreichische Pharmazeutische Gesellschaft, ÖPhG).
Sci. Pharm. 2010, 78(3), 543; https://doi.org/10.3797/scipharm.cespt.8.L03 (registering DOI)
Continuous Pharmaceutical Manufacture Using a Novel Wet Granulation Technique
School of Engineering, University of Warwick, Coventry, England
Author to whom correspondence should be addressed.
Received: 12 July 2010 / Accepted: 12 July 2010 / Published: 12 July 2010
PDF [100 KB, uploaded 29 September 2016]
Abstract Almost alone among the process industries, the pharmaceutical industry has tended to rely on batch operations. [...]
This is an open access article distributed under the Creative Commons Attribution License
which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (CC BY 4.0).
Share & Cite This Article
MDPI and ACS Style
SEVILLE, J.P.K.; WATERS, M. Continuous Pharmaceutical Manufacture Using a Novel Wet Granulation Technique. Sci. Pharm. 2010, 78, 543.
SEVILLE JPK, WATERS M. Continuous Pharmaceutical Manufacture Using a Novel Wet Granulation Technique. Scientia Pharmaceutica. 2010; 78(3):543.
SEVILLE, J. P. K.; WATERS, M. 2010. "Continuous Pharmaceutical Manufacture Using a Novel Wet Granulation Technique." Sci. Pharm. 78, no. 3: 543.
Show more citation formats
Show less citations formats
[Return to top]
For more information on the journal statistics, click here
Multiple requests from the same IP address are counted as one view.