Next Article in Journal
Increasing Gas–Solids Mass Transfer in Fluidized Beds by Application of Confined Fluidization—A Feasibility Study
Previous Article in Journal
Effect of Seawater Exposure on Impact Damping Behavior of Viscoelastic Material of Pounding Tuned Mass Damper (PTMD)
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Retraction

Retraction: Rezig, S. et al. (2018). Using Data-Mining Methods for Predicting Sequential Maintenance Activities. Applied Sciences, 8(11), 2184

Laboratoire de Génie Informatique, de Production et de Maintenance, UFR MIM, Université de Lorraine, 57000 Metz, France
*
Author to whom correspondence should be addressed.
Appl. Sci. 2019, 9(4), 633; https://doi.org/10.3390/app9040633
Submission received: 11 December 2018 / Accepted: 1 February 2019 / Published: 14 February 2019
After the results from a research project with former students of the university were published in Applied Sciences [1], it turned out that the example that was used by the students was taken from a thesis work carried out in an Indian company.
As soon as we heard this from our Indian colleagues, we reacted and asked the editorial office of Applied Sciences to remove the paper. The decision to retract has been made in cooperation with the authors of the article [1].
MDPI is a member of the Committee on Publication Ethics and takes seriously the responsibility to enforce strict ethical policies and standards. The published article [1] is retracted and shall be marked accordingly.

References

  1. Rezig, S.; Achour, Z.; Rezg, N. Using Data Mining Methods for Predicting Sequential Maintenance Activities. Appl. Sci. 2018, 8, 2184. [Google Scholar] [CrossRef]

Share and Cite

MDPI and ACS Style

Rezig, S.; Achour, Z.; Rezg, N. Retraction: Rezig, S. et al. (2018). Using Data-Mining Methods for Predicting Sequential Maintenance Activities. Applied Sciences, 8(11), 2184. Appl. Sci. 2019, 9, 633. https://doi.org/10.3390/app9040633

AMA Style

Rezig S, Achour Z, Rezg N. Retraction: Rezig, S. et al. (2018). Using Data-Mining Methods for Predicting Sequential Maintenance Activities. Applied Sciences, 8(11), 2184. Applied Sciences. 2019; 9(4):633. https://doi.org/10.3390/app9040633

Chicago/Turabian Style

Rezig, Sadok, Zied Achour, and Nidhal Rezg. 2019. "Retraction: Rezig, S. et al. (2018). Using Data-Mining Methods for Predicting Sequential Maintenance Activities. Applied Sciences, 8(11), 2184" Applied Sciences 9, no. 4: 633. https://doi.org/10.3390/app9040633

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop