Frydrýšek, K.; Skoupý, O.; Mrkvica, I.; Slaninková, A.; Kratochvíl, J.; Jurga, T.; Vlk, M.; Krpec, P.; Madeja, R.; Havlíček, M.;
et al. Stochastic Evaluation of Cutting Tool Load and Surface Quality during Milling of HPL. Appl. Sci. 2022, 12, 12523.
https://doi.org/10.3390/app122412523
AMA Style
Frydrýšek K, Skoupý O, Mrkvica I, Slaninková A, Kratochvíl J, Jurga T, Vlk M, Krpec P, Madeja R, Havlíček M,
et al. Stochastic Evaluation of Cutting Tool Load and Surface Quality during Milling of HPL. Applied Sciences. 2022; 12(24):12523.
https://doi.org/10.3390/app122412523
Chicago/Turabian Style
Frydrýšek, Karel, Ondřej Skoupý, Ivan Mrkvica, Aneta Slaninková, Jiří Kratochvíl, Tibor Jurga, Miroslav Vlk, Pavel Krpec, Roman Madeja, Miroslav Havlíček,
and et al. 2022. "Stochastic Evaluation of Cutting Tool Load and Surface Quality during Milling of HPL" Applied Sciences 12, no. 24: 12523.
https://doi.org/10.3390/app122412523
APA Style
Frydrýšek, K., Skoupý, O., Mrkvica, I., Slaninková, A., Kratochvíl, J., Jurga, T., Vlk, M., Krpec, P., Madeja, R., Havlíček, M., Stančeková, D., Pometlová, J., & Hlinka, J.
(2022). Stochastic Evaluation of Cutting Tool Load and Surface Quality during Milling of HPL. Applied Sciences, 12(24), 12523.
https://doi.org/10.3390/app122412523
