Next Article in Journal
The Use of Gigapixel Photogrammetry for the Understanding of Landslide Processes in Alpine Terrain
Next Article in Special Issue
Automated Detection of Field Monuments in Digital Terrain Models of Westphalia Using OBIA
Previous Article in Journal
Automated Classification of Terrestrial Images: The Contribution to the Remote Sensing of Snow Cover
Previous Article in Special Issue
Stratigraphy, Petrography and Grain-Size Distribution of Sedimentary Lithologies at Cahuachi (South Peru): ENSO-Related Deposits or a Common Regional Succession?
Article Menu
Issue 2 (February) cover image

Export Article

Open AccessArticle
Geosciences 2019, 9(2), 98; https://doi.org/10.3390/geosciences9020098

Locating Cave Entrances Using Lidar-Derived Local Relief Modeling

1
Department of Anthropology and Heritage Studies, University of California, Merced, CA 95343, USA
2
Cornerstone Environmental Consulting, Flagstaff, AZ 86001, USA
*
Author to whom correspondence should be addressed.
Received: 12 December 2018 / Revised: 4 February 2019 / Accepted: 6 February 2019 / Published: 20 February 2019
  |  
PDF [7257 KB, uploaded 20 February 2019]
  |  

Abstract

Lidar (Light detection and ranging) scanning has revolutionized our ability to locate geographic features on the earth’s surface, but there have been few studies that have addressed discovering caves using this technology. Almost all attempts to find caves using lidar imagery have focused on locating sinkholes that lead to underground cave systems. As archaeologists, our work in the Chiquibul Forest Reserve, a heavily forested area in western Belize, focuses on locating potential caves for investigation. Caves are an important part of Maya cultural heritage utilized by the ancient Maya people as ritual spaces. These sites contain large numbers of artifacts, architecture, and human remains, but are being looted at a rapid rate; therefore, our goal is to locate and investigate as many sites as possible during our field seasons. While some caves are entered via sinkholes, most are accessed via vertical cliff faces or are entered by dropping into small shafts. Using lidar-derived data, our goal was to locate and investigate not only sinkholes but other types of cave entrances using point cloud modeling. In this article, we describe our method for locating potential cave openings using local relief models that require only a working knowledge of relief visualization techniques. By using two pedestrian survey techniques, we confirmed a high rate of accuracy in locating cave entrances that varied in both size and morphology. Although 100% pedestrian survey coverage delivered the highest rate accuracy in cave detection, lidar image analyses proved to be expedient for meeting project goals when considering time and resource constraints. View Full-Text
Keywords: Lidar; GIS; Mesoamerica; Archaeology; Caves; Landscape; Ritual; Visualization; Maya; Belize; Sacred Lidar; GIS; Mesoamerica; Archaeology; Caves; Landscape; Ritual; Visualization; Maya; Belize; Sacred
Figures

Figure 1

This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).
SciFeed

Share & Cite This Article

MDPI and ACS Style

Moyes, H.; Montgomery, S. Locating Cave Entrances Using Lidar-Derived Local Relief Modeling. Geosciences 2019, 9, 98.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Related Articles

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Geosciences EISSN 2076-3263 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top