Next Article in Journal
A Surface-Enabled Computational Homogenization Method for Variable-Density Polymer Lattice Metastructures
Next Article in Special Issue
3D-Printed PLA Mechanical and Viscoelastic Behavior Dependence on the Nozzle Temperature and Printing Orientation
Previous Article in Journal
Electrospun PLA/DTAC Bicomponent Membranes for Low-Resistance and Antibacterial Air Filtration
Previous Article in Special Issue
Investigation of the Influence of Manufacturing on Filament Production and Its Impact on Additive Manufactured Structures
 
 

Order Article Reprints

Journal: Polymers, 2025
Volume: 17
Number: 768

Article: Investigation of the Effects of Different Curing Methods on the Adhesion Strength of Single-Lap Joints Produced by Bonding 3D-Printed ABS and PLA Plates with Different Epoxy Adhesives
Authors: by Muhammed S. Kamer
Link: https://www.mdpi.com/2073-4360/17/6/768

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop