Frohn-Sörensen, P.; Geueke, M.; Engel, B.; Löffler, B.; Bickendorf, P.; Asimi, A.; Bergweiler, G.; Schuh, G.
Design for 3D Printed Tools: Mechanical Material Properties for Direct Polymer Additive Tooling. Polymers 2022, 14, 1694.
https://doi.org/10.3390/polym14091694
AMA Style
Frohn-Sörensen P, Geueke M, Engel B, Löffler B, Bickendorf P, Asimi A, Bergweiler G, Schuh G.
Design for 3D Printed Tools: Mechanical Material Properties for Direct Polymer Additive Tooling. Polymers. 2022; 14(9):1694.
https://doi.org/10.3390/polym14091694
Chicago/Turabian Style
Frohn-Sörensen, Peter, Michael Geueke, Bernd Engel, Bernd Löffler, Philipp Bickendorf, Arian Asimi, Georg Bergweiler, and Günther Schuh.
2022. "Design for 3D Printed Tools: Mechanical Material Properties for Direct Polymer Additive Tooling" Polymers 14, no. 9: 1694.
https://doi.org/10.3390/polym14091694
APA Style
Frohn-Sörensen, P., Geueke, M., Engel, B., Löffler, B., Bickendorf, P., Asimi, A., Bergweiler, G., & Schuh, G.
(2022). Design for 3D Printed Tools: Mechanical Material Properties for Direct Polymer Additive Tooling. Polymers, 14(9), 1694.
https://doi.org/10.3390/polym14091694
