Next Article in Journal
Recent Advances in the Removal of Organic Dyes from Aqueous Media with Conducting Polymers, Polyaniline and Polypyrrole, and Their Composites
Next Article in Special Issue
Influence of Poly (benzyl oleate-co-maleic anhydride) Pour Point Depressant with Di-Stearyl Amine on Waxy Crude Oil
Previous Article in Journal
Fabrication of Polysaccharide-Based Halochromic Nanofibers via Needle-Less Electrospinning and Their Characterization: A Study of the Leaching Effect
Previous Article in Special Issue
Synthesis and Performance Evaluation of a Novel Heat and Salt-Resistant Gel Plugging Agent
 
 
Article
Peer-Review Record

Preparation and Laboratory Testing of Polymeric Scale Inhibitor Colloidal Materials for Oilfield Mineral Scale Control

Polymers 2022, 14(19), 4240; https://doi.org/10.3390/polym14194240
by Hanji Wang 1,2,†, Huaxia Dong 3,†, Xianbin Liu 1,2,* and Ping Zhang 3,*
Reviewer 1: Anonymous
Reviewer 2: Anonymous
Polymers 2022, 14(19), 4240; https://doi.org/10.3390/polym14194240
Submission received: 28 August 2022 / Revised: 28 September 2022 / Accepted: 1 October 2022 / Published: 10 October 2022
(This article belongs to the Special Issue Polymers for Oilfield Production Chemistry)

Round 1

Reviewer 1 Report


Comments for author File: Comments.docx

Author Response

Please see the attachment.

Author Response File: Author Response.docx

Reviewer 2 Report

Journal: Polymers

Title: Synthesis and laboratory testing of polymeric scale inhibitor colloidal materials for oilfield mineral scale control

Author: Hanji Wang, Huaxia Dong, Xianbin Liu, Ping Zhang

Manuscript ID: polymers-1912128

 

This paper focuses on the synthesis of novel BaPCI material composed of barium-PSS inhibitor prepared by a synthesis route involving precipitation and surfactant surface modification.

I think it is an interesting and complete study where synthesis and characterization are perfectly developed. Abbreviations: are useful to follow the work. Introduction: authors perfectly describe the problem and the alternatives to avoid the mineral scales.

For this reason, my recommendation is to accept the paper for publication, nevertheless, the following points should be better explained or included:

 

What is the reason to use this molecular weight, has the authors check another molecular weight of polymer?

Experimental procedure is clearly described, but authors could explain the reason of temperature chosen.

Which is the temperature of transport experiment?

Characterization techniques are useful to obtain the results, but I think more polymer characterization should be included.

Line 379: oilfields operations could be named.

Which is the error of turbidity method of analysis?

Author Response

Please see the attachment.

Author Response File: Author Response.docx

Round 2

Reviewer 1 Report

I am satisfied by the correction done by the authors

Back to TopTop