Next Article in Journal
Development of a New Type of Flame Retarded Biocomposite Reinforced with a Biocarbon/Basalt Fiber System: A Comparative Study between Poly(lactic Acid) and Polypropylene
Next Article in Special Issue
Experimental and Numerical Investigation of 3D Printing PLA Origami Tubes under Quasi-Static Uniaxial Compression
Previous Article in Journal
Recent Trends in Magnetic Polymer Nanocomposites for Aerospace Applications: A Review
Previous Article in Special Issue
Influence of Loading Rate and Temperature on the Energy Absorption of 3D-Printed Polymeric Origami Tubes under Quasi-Static Loading
 
 

Order Article Reprints

Journal: Polymers, 2022
Volume: 14
Number: 4085

Article: Geometry Optimization of the Runner Insert for Improving the Appearance Quality of the Injection Molded Auto Part
Authors: by Zhiguo Ma, Zheng Li, Ming Huang, Chuntai Liu, Changyu Shen and Xinyu Wang
Link: https://www.mdpi.com/2073-4360/14/19/4085

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop