Next Article in Journal
Influence of the Graphene Filler Nature on the Morphology and Properties of Melt Blended EVOH Based Nanocomposites
Next Article in Special Issue
Development of 3D Printed Biodegradable Mesh with Antimicrobial Properties for Pelvic Organ Prolapse
Previous Article in Journal
Process Optimization for Manufacturing PAN-Based Conductive Yarn with Carbon Nanomaterials through Wet Spinning
 
 

Order Article Reprints

Journal: Polymers, 2021
Volume: 13
Number: 3545

Article: Additive Manufacturing and Characterization of Metal Particulate Reinforced Polylactic Acid (PLA) Polymer Composites
Authors: by Ved S. Vakharia, Lily Kuentz, Anton Salem, Michael C. Halbig, Jonathan A. Salem and Mrityunjay Singh
Link: https://www.mdpi.com/2073-4360/13/20/3545

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop