Next Article in Journal
Effect of Material Parameter of Viscoelastic Giesekus Fluids on Extensional Properties in Spinline and Draw Resonance Instability in Isothermal Melt Spinning Process
Previous Article in Journal
Additively Manufactured Parts Made of a Polymer Material Used for the Experimental Verification of a Component of a High-Speed Machine with an Optimised Geometry—Preliminary Research
 
 

Order Article Reprints

Journal: Polymers, 2021
Volume: 13
Number: 138

Article: Modeling Injection Molding of High-Density Polyethylene with Crystallization in Open-Source Software
Authors: by Kristjan Krebelj, Anton Krebelj, Miroslav Halilovič and Nikolaj Mole
Link: https://www.mdpi.com/2073-4360/13/1/138

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop