Order Article Reprints

Moreno M, El Azhari I, Apel D, Meixner M, Wan W, Pinto H, Soldera F, Mücklich F, García J. Design of Comb Crack Resistant Milling Inserts: A Comparison of Stresses, Crack Propagation, and Deformation Behavior between Ti(C,N)/α-Al₂O₃ and Zr(C,N)/α-Al₂O₃ CVD Coatings. Crystals. 2021; 11(5):493. https://doi.org/10.3390/cryst11050493

Moreno, Maiara, Idriss El Azhari, Daniel Apel, Matthias Meixner, Wei Wan, Haroldo Pinto, Flavio Soldera, Frank Mücklich, and José García. 2021. "Design of Comb Crack Resistant Milling Inserts: A Comparison of Stresses, Crack Propagation, and Deformation Behavior between Ti(C,N)/α-Al₂O₃ and Zr(C,N)/α-Al₂O₃ CVD Coatings" Crystals 11, no. 5: 493. https://doi.org/10.3390/cryst11050493

Moreno, M., El Azhari, I., Apel, D., Meixner, M., Wan, W., Pinto, H., Soldera, F., Mücklich, F., & García, J. (2021). Design of Comb Crack Resistant Milling Inserts: A Comparison of Stresses, Crack Propagation, and Deformation Behavior between Ti(C,N)/α-Al₂O₃ and Zr(C,N)/α-Al₂O₃ CVD Coatings. Crystals, 11(5), 493. https://doi.org/10.3390/cryst11050493