Next Article in Journal
Parametric Analysis and Experimental Verification of a Hybrid Vibration Energy Harvester Combining Piezoelectric and Electromagnetic Mechanisms
Next Article in Special Issue
Research on the Drilling Performance of a Helical Point Micro Drill with Different Geometry Parameters
Previous Article in Journal
3D Finite Element Simulation of Micro End-Milling by Considering the Effect of Tool Run-Out
Previous Article in Special Issue
Rapid Prototyping of a Micromotor with an Optical Rotary Encoder
 
 

Order Article Reprints

Journal: Micromachines, 2017
Volume: 8
Number: 188

Article: Modeling the Influence of Tool Deflection on Cutting Force and Surface Generation in Micro-Milling
Authors: by Dehong Huo, Wanqun Chen, Xiangyu Teng, Chao Lin and Kai Yang
Link: https://www.mdpi.com/2072-666X/8/6/188

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop