Next Article in Journal
Crack-Based Sensor by Using the UV Curable Polyurethane-Acrylate Coated Film with V-Groove Arrays
Next Article in Special Issue
Numerical and Experimental Analysis of a Prototypical Thermoelectric Generator Dedicated to Wood-Fired Heating Stove
Previous Article in Journal
An Automatic Detection Method for Cutting Path of Chips in Wafer
Previous Article in Special Issue
Thermoelectric Power-Factor of Ag-Doped TiO2 Thin Film
 
 
Review
Peer-Review Record

Recent Progress in Development of Carbon-Nanotube-Based Photo-Thermoelectric Sensors and Their Applications in Ubiquitous Non-Destructive Inspections

Micromachines 2023, 14(1), 61; https://doi.org/10.3390/mi14010061
by Kou Li 1,2, Yuya Kinoshita 3, Daiki Sakai 3 and Yukio Kawano 1,2,3,4,*
Reviewer 1:
Micromachines 2023, 14(1), 61; https://doi.org/10.3390/mi14010061
Submission received: 30 November 2022 / Revised: 18 December 2022 / Accepted: 19 December 2022 / Published: 26 December 2022

Round 1

Reviewer 1 Report

Minor Revision:

In the review study, the authors discussed recent progress in the development of carbon nanotubes-based 3 photo-thermoelectric sensors and their applications in ubiquitous non-destructive inspection, which effectively combines photo absorption-induced local heating and the associated thermoelectric conversion for uncooled and broadband photo-detection. The present study provides detailed insight for indorsing the contributions of PTE device design strategies with carbon nanotube (CNT) films to demonstrate multi-functional non-destructive inspections, and the theoretical background study clarify the respective contributions from material, structural, mechanical, and optical approaches to multifunctional performances of the CNT film PTE sensors. The manuscript is well organized. At present, I feel that this manuscript is suitable for publication in this journal. However, I suggest some minor modifications before publication.

1.  For introduction part, it is suggested to include/mention more discussion based on main objective of present study.

2.  Line 75-79, It is suggested to add some more explanation about photo-thermoelectric effect in Introduction part.

3.  Line 146, reference should be about PTE effect in channel-electrode junctions.

4.  Line 276, The description about PTE in PN junction should be properly described by reference. Similarly, the whole part of “Application: Ubiquitous non-destructive inspection” should mention with proper references.

5.  All the equations used in the manuscript should be mentioned with accurate references.

Author Response

Please see the attachment.

Author Response File: Author Response.pdf

Reviewer 2 Report

This is a quite useful review on the topic of the fundamentals and applications of CNT film-based PTE sensors. I consider it is well written and researched, the references are overall recent and relevant and the figures are interesting and informative. I recommend it to be published in its current form. 

Author Response

Please see the attachment.

Author Response File: Author Response.pdf

Back to TopTop