Next Article in Journal
Recyclability of Concrete Pavement Incorporating High Volume of Fly Ash
Next Article in Special Issue
Thermal and Mechanical Behavior of Hybrid Polymer Nanocomposite Reinforced with Graphene Nanoplatelets
Previous Article in Journal
X-Ray Spectroscopy of Ultra-Thin Oxide/Oxide Heteroepitaxial Films: A Case Study of Single-Nanometer VO2/TiO2
Previous Article in Special Issue
Investigation of Laminar Convective Heat Transfer for Al2O3-Water Nanofluids Flowing through a Square Cross-Section Duct with a Constant Heat Flux
Article Menu

Export Article

Open AccessArticle
Materials 2015, 8(8), 5467-5478;

Fabrication of CH3NH3PbI3/PVP Composite Fibers via Electrospinning and Deposition

Department of Greenergy, National University of Tainan, Tainan 70005, Taiwan
Department of Photonics, National Cheng Kung University, Tainan 70005, Taiwan
These authors contributed equally to this work.
Author to whom correspondence should be addressed.
Academic Editor: Teen-Hang Meen
Received: 10 June 2015 / Revised: 5 August 2015 / Accepted: 14 August 2015 / Published: 21 August 2015
(This article belongs to the Special Issue Selected Papers from ICASI 2015)
Full-Text   |   PDF [7106 KB, uploaded 21 August 2015]   |  


In our study, one-dimensional PbI2/polyvinylpyrrolidone (PVP) composition fibers have been prepared by using PbI2 and PVP as precursors dissolved in N,N-dimethylformamide via a electrospinning process. Dipping the fibers into CH3NH3I solution changed its color, indicating the formation of CH3NH3PbI3, to obtain CH3NH3PbI3/PVP composite fibers. The structure, morphology and composition of the all as-prepared fibers were characterized by using X-ray diffraction and scanning electron microscopy. View Full-Text
Keywords: polyvinylpyrrolidone; perovskite; electrospinning polyvinylpyrrolidone; perovskite; electrospinning

Figure 1

This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).

Share & Cite This Article

MDPI and ACS Style

Chao, L.-M.; Tai, T.-Y.; Chen, Y.-Y.; Lin, P.-Y.; Fu, Y.-S. Fabrication of CH3NH3PbI3/PVP Composite Fibers via Electrospinning and Deposition. Materials 2015, 8, 5467-5478.

Show more citation formats Show less citations formats

Related Articles

Article Metrics

Article Access Statistics



[Return to top]
Materials EISSN 1996-1944 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top