Parodo, G.; Moffa, G.; Silvestri, A.; Sorrentino, L.; Testa, G.; Turchetta, S.
Influence of Surface Treatments on the Pull-Off Performance of Adhesively Bonded Polylactic Acid (PLA) Specimens Manufactured by Fused Deposition Modeling (FDM). Materials 2025, 18, 3965.
https://doi.org/10.3390/ma18173965
AMA Style
Parodo G, Moffa G, Silvestri A, Sorrentino L, Testa G, Turchetta S.
Influence of Surface Treatments on the Pull-Off Performance of Adhesively Bonded Polylactic Acid (PLA) Specimens Manufactured by Fused Deposition Modeling (FDM). Materials. 2025; 18(17):3965.
https://doi.org/10.3390/ma18173965
Chicago/Turabian Style
Parodo, Gianluca, Giuseppe Moffa, Alessandro Silvestri, Luca Sorrentino, Gabriel Testa, and Sandro Turchetta.
2025. "Influence of Surface Treatments on the Pull-Off Performance of Adhesively Bonded Polylactic Acid (PLA) Specimens Manufactured by Fused Deposition Modeling (FDM)" Materials 18, no. 17: 3965.
https://doi.org/10.3390/ma18173965
APA Style
Parodo, G., Moffa, G., Silvestri, A., Sorrentino, L., Testa, G., & Turchetta, S.
(2025). Influence of Surface Treatments on the Pull-Off Performance of Adhesively Bonded Polylactic Acid (PLA) Specimens Manufactured by Fused Deposition Modeling (FDM). Materials, 18(17), 3965.
https://doi.org/10.3390/ma18173965
