Next Article in Journal
Study on Quantitative Adjustment of CD Bias and Profile Angle in the Wet Etching of Cu-Based Stacked Electrode
Next Article in Special Issue
Experiment and Simulation Study on the Crashworthiness of Markforged 3D-Printed Carbon/Kevlar Hybrid Continuous Fiber Composite Honeycomb Structures
Previous Article in Journal
The Potential of Using Shungite Mineral from Eastern Kazakhstan in Formulations for Rubber Technical Products
Previous Article in Special Issue
Three-Dimensional-Printed Composite Structures: The Effect of LSCF Slurry Solid Loading, Binder, and Direct-Write Process Parameters
 
 

Order Article Reprints

Journal: Materials, 2025
Volume: 18
Number: 115

Article: The Use of 3D Printing Filaments to Build Moisture Sensors in Porous Materials
Authors: by Magdalena Paśnikowska-Łukaszuk, Joanna Szulżyk-Cieplak, Magda Wlazło, Jarosław Zubrzycki, Ewa Łazuka, Arkadiusz Urzędowski and Zbigniew Suchorab
Link: https://www.mdpi.com/1996-1944/18/1/115

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop