Next Article in Journal
Turning Non-Sticking Surface into Sticky Surface: Correlation between Surface Topography and Contact Angle Hysteresis
Next Article in Special Issue
Microstructure and Mechanical Properties of Mg-Li/Al Dissimilar Joints via Dynamic Support Friction Stir Lap Welding
Previous Article in Journal
Geometric Complexity Control in Topology Optimization of 3D-Printed Fiber Composites for Performance Enhancement
Previous Article in Special Issue
The Development of a Continuous Constitutive Model for Thin-Shell Components with A Sharp Change in the Property at Welded Joints
 
 

Order Article Reprints

Journal: Materials, 2024
Volume: 17
Number: 2004

Article: Effects of Cu/SnAgCu Powder Fraction and Sintering Time on Microstructure and Mechanical Properties of Transient Liquid Phase Sintered Joints
Authors: by Dinh-Phuc Tran, Yu-Ting Liu and Chih Chen
Link: https://www.mdpi.com/1996-1944/17/9/2004

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop