Next Article in Journal
Experimental Study on the Preparation of High-Purity Iron Oxide Red by Acid Leaching Iron from Coal Gangue
Previous Article in Journal
Abrasive Waterjet Machining
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Pakhomova et al. High-Entropy Diborides—Silicon Carbide Composites by Reactive and Non-Reactive Spark Plasma Sintering: A Comparative Study. Materials 2024, 17, 718

1
Unità di Ricerca del Consorzio Interuniversitario Nazionale per la Scienza e Tecnologia dei Materiali (INSTM), Dipartimento di Ingegneria Meccanica, Chimica, e dei Materiali, Università degli Studi di Cagliari, via Marengo 2, 09123 Cagliari, Italy
2
Dipartimento di Scienze Chimiche, Fisiche, Matematiche e Naturali, Università degli Studi di Sassari, 07100 Sassari, Italy
3
Dipartimento di Tecnica e Gestione dei Sistemi Industriali, Università di Padova, Stradella S. Nicola 3, 36100 Vicenza, Italy
*
Author to whom correspondence should be addressed.
Materials 2024, 17(13), 3274; https://doi.org/10.3390/ma17133274
Submission received: 27 May 2024 / Accepted: 29 May 2024 / Published: 3 July 2024
In the original publication [1], there was a mistake in Figure 10. The subfigure (g) Nb is wrong; the correct subfigure should be (g) Zr. The corrected Figure 10 appears below. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Pakhomova, E.; Cao, G.; Orrù, R.; Garroni, S.; Ferro, P.; Licheri, R. High-Entropy Diborides—Silicon Carbide Composites by Reactive and Non-Reactive Spark Plasma Sintering: A Comparative Study. Materials 2024, 17, 718. [Google Scholar] [CrossRef] [PubMed]
Figure 10. General (a) and detailed (b) SEM views along with the corresponding Hf (c), Mo (d), Ti (e), Ta (f), Zr (g), and Si (h) EDS maps of the HEB_Zr–SiC sample obtained by SPS (TD = 1800 °C, tD = 20 min, P = 20 MPa, HR = 200 °C/min) from powders synthesized by SHS according to Reaction (1) with Me = Zr.
Figure 10. General (a) and detailed (b) SEM views along with the corresponding Hf (c), Mo (d), Ti (e), Ta (f), Zr (g), and Si (h) EDS maps of the HEB_Zr–SiC sample obtained by SPS (TD = 1800 °C, tD = 20 min, P = 20 MPa, HR = 200 °C/min) from powders synthesized by SHS according to Reaction (1) with Me = Zr.
Materials 17 03274 g010
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Pakhomova, E.; Cao, G.; Orrù, R.; Garroni, S.; Ferro, P.; Licheri, R. Correction: Pakhomova et al. High-Entropy Diborides—Silicon Carbide Composites by Reactive and Non-Reactive Spark Plasma Sintering: A Comparative Study. Materials 2024, 17, 718. Materials 2024, 17, 3274. https://doi.org/10.3390/ma17133274

AMA Style

Pakhomova E, Cao G, Orrù R, Garroni S, Ferro P, Licheri R. Correction: Pakhomova et al. High-Entropy Diborides—Silicon Carbide Composites by Reactive and Non-Reactive Spark Plasma Sintering: A Comparative Study. Materials 2024, 17, 718. Materials. 2024; 17(13):3274. https://doi.org/10.3390/ma17133274

Chicago/Turabian Style

Pakhomova, Ekaterina, Giacomo Cao, Roberto Orrù, Sebastiano Garroni, Paolo Ferro, and Roberta Licheri. 2024. "Correction: Pakhomova et al. High-Entropy Diborides—Silicon Carbide Composites by Reactive and Non-Reactive Spark Plasma Sintering: A Comparative Study. Materials 2024, 17, 718" Materials 17, no. 13: 3274. https://doi.org/10.3390/ma17133274

APA Style

Pakhomova, E., Cao, G., Orrù, R., Garroni, S., Ferro, P., & Licheri, R. (2024). Correction: Pakhomova et al. High-Entropy Diborides—Silicon Carbide Composites by Reactive and Non-Reactive Spark Plasma Sintering: A Comparative Study. Materials 2024, 17, 718. Materials, 17(13), 3274. https://doi.org/10.3390/ma17133274

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop