Next Article in Journal
Fresh, Mechanical, and Thermal Properties of Cement Composites Containing Recycled Foam Concrete as Partial Replacement of Cement and Fine Aggregate
Next Article in Special Issue
An Investigation of the Anisotropic Mechanical Properties of Additive-Manufactured 316L SS with SLM
Previous Article in Journal
Bearing Capacity Performance and Optimal Design of a Novel Aluminum Alloy Arch Gusset Joint
Previous Article in Special Issue
Achieving an Excellent Strength and Ductility Balance in Additive Manufactured Ti-6Al-4V Alloy through Multi-Step High-to-Low-Temperature Heat Treatment
 
 

Order Article Reprints

Journal: Materials, 2023
Volume: 16
Number: 7166

Article: Characterizing and Modeling Transformation-Induced Plasticity in 13Cr-4Ni Welds upon Cooling
Authors: by Jean-Benoit Lévesque, Carlo Baillargeon, Daniel Paquet, Jacques Lanteigne and Henri Champliaud
Link: https://www.mdpi.com/1996-1944/16/22/7166

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop