Next Article in Journal
Effects of Three-Dimensional Circular Truncated Cone Microstructures on the Performance of Flexible Pressure Sensors
Next Article in Special Issue
Comparison of Conventional and Robotic Fused Filament Fabrication on Silicone Build Plates
Previous Article in Journal
Development of Wide-Angle Short-Wave Pass Thin Film Based on the Ultra-Thin Silicate Glass
Previous Article in Special Issue
Investigation of the Mechanical Properties of Friction Drilling with 6082-T6 Aluminium Alloy
 
 

Order Article Reprints

Journal: Materials, 2022
Volume: 15
Number: 4707

Article: Development and Validation of Empirical Models to Predict Metal Additively Manufactured Part Density and Surface Roughness from Powder Characteristics
Authors: by Paul Quinn, Sinéad M. Uí Mhurchadha, Jim Lawlor and Ramesh Raghavendra
Link: https://www.mdpi.com/1996-1944/15/13/4707

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop