Next Article in Journal
Effect of Modification of Amorphous Silica with Ammonium Agents on the Physicochemical Properties and Hydrogenation Activity of Ir/SiO2 Catalysts
Next Article in Special Issue
Microstructures and Mechanical Properties of Deposited Fe-8Cr-3V-2Mo-2W on SCM420 Substrate Using Directed Energy Deposition and Effect of Post-Heat Treatment
Previous Article in Journal
Addendum: Żywicka, B., et al. Comparison of a 1940 nm Thulium-Doped Fiber Laser and a 1470 nm Diode Laser for Cutting Efficacy and Hemostasis in a Pig Model of Spleen Surgery. Materials 2020, 13, 1167
Previous Article in Special Issue
Effects of Energy Parameters on Dimensional Accuracy When Joining Stainless-Steel Powders with Heterogeneous Metal Substrates
 
 

Order Article Reprints

Journal: Materials, 2021
Volume: 14
Number: 967

Article: A Study on Using the Additive Manufacturing Process for the Development of a Closed Pump Impeller for Mechanically Pumped Fluid Loop Systems
Authors: by Alexandra Adiaconitei, Ionut Sebastian Vintila, Radu Mihalache, Alexandru Paraschiv, Tiberius Frigioescu, Mihai Vladut and Laurent Pambaguian
Link: https://www.mdpi.com/1996-1944/14/4/967

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop