Cyclic Tests of Smooth and Notched Specimens Subjected to Bending and Torsion Taking into Account the Effect of Mean Stress
Department of Mechanics and Machine Design, Opole University of Technology, 45-271 Opole, Poland
*
Author to whom correspondence should be addressed.
Materials 2020, 13(9), 2141; https://doi.org/10.3390/ma13092141
Received: 13 March 2020
/
Revised: 13 April 2020
/
Accepted: 24 April 2020
/
Published: 6 May 2020
(This article belongs to the Special Issue Fatigue and Fracture of Materials)
The paper contains the results of fatigue tests of smooth and notched specimens made of 10HNAP (S355J2G1W) subjected to proportional cyclic loading with use of mean values stress. The results obtained for specimens under bending, torsion and one combination of bending with torsion for four mean values have been compared. The experimental data have been collected in the tables and shown in the figures with use of various σa(τa)-N fatigue characteristics for which parameters of the regression equations have been determined. The influence of average values on the allowable stress amplitudes and amplitude of moments at the level close to the fatigue limit depending on the angle α determining loading combination and the average stress is also shown. The greatest effect of the notch on fatigue life compared to smooth specimens is observed at symmetrical loads. At unsymmetrical loads with non-zero mean stress, this effect clearly weakens or disappears.
View Full-Text
Keywords:
mean stress; fatigue life; multiaxial stress; bending; torsion
▼
Show Figures
Figure 1
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited
MDPI and ACS Style
Pawliczek, R.; Rozumek, D. Cyclic Tests of Smooth and Notched Specimens Subjected to Bending and Torsion Taking into Account the Effect of Mean Stress. Materials 2020, 13, 2141. https://doi.org/10.3390/ma13092141
AMA Style
Pawliczek R, Rozumek D. Cyclic Tests of Smooth and Notched Specimens Subjected to Bending and Torsion Taking into Account the Effect of Mean Stress. Materials. 2020; 13(9):2141. https://doi.org/10.3390/ma13092141
Chicago/Turabian StylePawliczek, Roland, and Dariusz Rozumek. 2020. "Cyclic Tests of Smooth and Notched Specimens Subjected to Bending and Torsion Taking into Account the Effect of Mean Stress" Materials 13, no. 9: 2141. https://doi.org/10.3390/ma13092141
Find Other Styles
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.
