Fernández, P.;                     Blanco, D.;                     Rico, C.;                     Valiño, G.;                     Mateos, S.    
        Influence of Surface Position along the Working Range of Conoscopic Holography Sensors on Dimensional Verification of AISI 316 Wire EDM Machined Surfaces. Sensors 2014, 14, 4495-4512.
    https://doi.org/10.3390/s140304495
    AMA Style
    
                                Fernández P,                                 Blanco D,                                 Rico C,                                 Valiño G,                                 Mateos S.        
                Influence of Surface Position along the Working Range of Conoscopic Holography Sensors on Dimensional Verification of AISI 316 Wire EDM Machined Surfaces. Sensors. 2014; 14(3):4495-4512.
        https://doi.org/10.3390/s140304495
    
    Chicago/Turabian Style
    
                                Fernández, Pedro,                                 David Blanco,                                 Carlos Rico,                                 Gonzalo Valiño,                                 and Sabino Mateos.        
                2014. "Influence of Surface Position along the Working Range of Conoscopic Holography Sensors on Dimensional Verification of AISI 316 Wire EDM Machined Surfaces" Sensors 14, no. 3: 4495-4512.
        https://doi.org/10.3390/s140304495
    
    APA Style
    
                                Fernández, P.,                                 Blanco, D.,                                 Rico, C.,                                 Valiño, G.,                                 & Mateos, S.        
        
        (2014). Influence of Surface Position along the Working Range of Conoscopic Holography Sensors on Dimensional Verification of AISI 316 Wire EDM Machined Surfaces. Sensors, 14(3), 4495-4512.
        https://doi.org/10.3390/s140304495