Search Results (7)

Background/Objectives: The oral delivery of large-molecule drugs remains challenging due to poor solubility, perdemeability, and stability in the gastrointestinal tract, resulting in low bioavailability. In this study, hot melt extrusion (HME) was investigated as a solvent-free manufacturing technique for mucoadhesive bilayer films to improve drug absorption. Methods: Polyvinyl alcohol (PVA) and polyethylene oxide (PEO) were evaluated as mucoadhesive film-forming polymers, in conjunction with Eudragit^® RS as a water-insoluble backing layer. Paracetamol and lactase were utilized as small and large molecule APIs, respectively. The resulting films were assembled into bilayer film samples and examined for mechanical properties, mucoadhesion, and dissolution behavior. A novel dissolution model was developed to evaluate unidirectional drug transport. Results: The results showed that bilayer films could be successfully fabricated using HME, with different mechanical properties depending on the polymer and drug content. Tests with the newly developed dissolution model showed a unidirectional drug release. The model also confirmed the need for biorelevant dissolution test systems because of a better differentiation between polymers compared to standard test methods such as the paddle-over-disk method. Furthermore, the investigation revealed that the activity of enzymes was retained after extrusion, thus indicating the feasibility of processing biologics. Conclusions: This study highlights the potential of HME to produce bilayer films as an innovative drug delivery platform offering improved bioavailability for both small and large molecules. Full article

The performed research presents modeling results for designing microfluidic vortex diodes. These devices rectify fluid flow and can be used in many applications on micro and macro scales. The modeling, utilizing computational fluid dynamics (CFD) with the turbulence model RANS k-ε in COMSOL Multiphysics, has led to optimizing diodicity—the reversed-to-forward flow pressure drop ratio. The goal was to find the best flow-rectifying geometry within the 2D vortex-type design by changing the wall geometry, diode shape, and inflow velocities, identifying significant parameters and dependencies. Improving diodicity can be achieved by increasing the radius r₁ of the central channel, increasing the entire diode radius r₂, decreasing the width w of the rectangular channel, and reducing its length L. Additionally, changing the circular shape of the diode to an elliptical one can improve diodicity. The significance of this research is evident in the potential applications of these devices in microfluidic setups where fixed-geometry unidirectional flow is required, e.g., mixing, filtration, cell separation, and drug delivery, or on industrial scales, e.g., energy harvesting, wastewater treatment, and water sterilization. Full article

Vocalization seems to be a viable source of signal for assessing broiler welfare. However, it may require an understanding of the birds’ signals, both quantitatively and qualitatively. The delivery of calls with a specific set of acoustic features must be understood to assess the broiler’s well-being. The present study aimed to analyze broiler chick vocalization through the sounds emitted during social isolation and understand what would be the flock size where the chicks present the smallest energy loss in vocalizing. The experiments were carried out during the first 3 days of growth, and during the trial, chicks received feed and water ad libitum. A total of 30 1-day-old chicks Cobb^® breed were acquired at a commercial hatching unit. The birds were tested from 1 to 3 days old. A semi-anechoic chamber was used to record the vocalization with a unidirectional microphone connected to a digital recorder. We placed a group of 15 randomly chosen chicks inside the chamber and recorded the peeping sound, and the assessment was conducted four times with randomly chosen birds. We recorded the vocalization for 2 min and removed the birds sequentially stepwise until only one bird was left inside the semi-anechoic chamber. Each audio signal recorded during the 40 s was chosen randomly for signal extraction and analysis. Fast Fourier transform (FFT) was used to extract the acoustic features and the energy emitted during the vocalization. Using data mining, we compared three classification models to predict the rearing condition (classes distress and normal). The results show that birds’ vocalization differed when isolated and in a group. Results also indicate that the energy spent in vocalizing varies depending on the size of the flock. When isolated, the chicks emit a high-intensity sound, “alarm call”, which uses high energy. In contrast, they spent less energy when flocked in a group, indicating good well-being when the flock was 15 chicks. The weight of birds influenced the amount of signal energy. We also found that the most effective classifier model was the Random Forest, with an accuracy of 85.71%, kappa of 0.73, and cross-entropy of 0.2. Full article

A pharmaceutical vehicle based on lyophilized liposomes is proposed for the buccal administration of drugs aimed at systemic delivery through the sublingual mucosa. Liposomes made of egg phosphatidylcholine and cholesterol (7/3 molar ratio) were prepared and lyophilized in the presence of different additive mixtures with mucoadhesive and taste-masking properties. Palatability was assayed on healthy volunteers. The lyophilization cycle was optimized, and the lyophilized product was compressed to obtain round and capsule-shaped tables that were evaluated in healthy volunteers. Tablets were also assayed regarding weight and thickness uniformities, swelling index and liposome release. The results proved that lyophilized liposomes in unidirectional round tablets have palatability, small size, comfortability and buccal retention adequate for sublingual administration. In contact with water fluids, the tablets swelled, and rehydrated liposomes were released at a slower rate than permeation efficiency determined using a biomimetic membrane. Permeability efficiency values of 0.72 ± 0.34 µg/cm²/min and 4.18 ± 0.95 µg/cm²/min were obtained for the liposomes with and without additives, respectively. Altogether, the results point to the vehicle proposed as a liposomal formulation suitable for systemic drug delivery through the sublingual mucosa. Full article

The flexible, anti-fouling, and bionic surface-enhanced Raman scattering (SERS) biochip, which has a Nepenthes peristome-like structure, was fabricated by photolithography, replicated technology, and thermal evaporation. The pattern of the bionic Nepenthes peristome-like structure was fabricated by two layers of photolithography with SU-8 photoresist. The bionic structure was then replicated by polydimethylsiloxane (PDMS) and grafting the zwitterion polymers (2-methacryloyloxyethyl phosphorylcholine, MPC) by atmospheric plasma polymerization (PDMS-PMPC). The phospholipid monomer of MPC immobilization plays an important role; it can not only improve hydrophilicity, anti-fouling and anti-bacterial properties, and biocompatibility, but it also allows for self-driving and unidirectional water delivery. Ag nanofilms (5 nm) were deposited on a PDMS (PDMS-Ag) substrate by thermal evaporation for SERS detection. Characterizations of the bionic SERS chips were measured by a scanning electron microscope (SEM), optical microscope (OM), X-ray photoelectron spectrometer (XPS), Fourier-transform infrared spectroscopy (FTIR), and contact angle (CA) testing. The results show that the superior anti-fouling capability of proteins and bacteria (E. coli) was found on the PDMS-PMPC substrate. Furthermore, the one-way liquid transfer capability of the bionic SERS chip was successfully demonstrated, which provides for the ability to separate samples during the flow channel, and which was detected by Raman spectroscopy. The SERS intensity (adenine, 10⁻⁴ M) of PDMS-Ag with a bionic structure is ~4 times higher than PDMS-Ag without a bionic structure, due to the multi-reflection of the 3D bionic structure. The high-sensitivity bionic SERS substrate, with its self-driving water capability, has potential for biomolecule separation and detection. Full article

The work herein presented aims to develop and characterize carvedilol (CVD) releasable non-water-soluble monolayers and a multilayer patch made of ultrathin micron and submicron fibers for drug delivery into the sublingual mucosa. Firstly, the developed formulations containing CVD within different biopolymers (PDLA, PCL, and PHB) were characterized by scanning electron microscopy (SEM), attenuated total reflectance Fourier transformed infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), wide-angle X-ray scattering (WAXS), and for their in vitro drug release. SEM micrographs assessed the fiber morphology attained by adding carvedilol. ATR-FTIR spectra revealed good chemical compatibility between CVD and the tested biopolymers, whereas DSC and WAXS confirmed that CVD was in an amorphous state within the biopolymeric fibers. In vitro release studies showed enhanced CVD release kinetics from the electrospun biopolymer monolayers compared to the dissolution rate of the commercial form of the pure drug, except for the slow-releasing PDLA fibers. Finally, the selected CVD-loaded layer, i.e., electrospun PHB, was built into a three-layer patch to tackle mucosa adhesion and unidirectional release, while retaining the enhanced release kinetics. The patch design proposed here further demonstrates the potential of the electro-hydrodynamic processing technology to render unique mucoadhesive controlled delivery platforms for poorly water-soluble drugs. Full article

Marine renewables represent a promising and innovative alternative source for satisfying the energy demands of growing populations while reducing the consumption of fossil fuels. Most technological advancements and energy yield assessments have focused on promoting the use of kinetic energy from tidal streams with flow velocities higher than 2.0 m s⁻¹. However, slower-moving flows from ocean currents are recently explored due to their nearly continuous and unidirectional seasonal flows. In this study, the potential of the Yucatan Current was analysed at nearshore sites over the insular shelf of Cozumel Island in the Mexican Caribbean. Field measurements were undertaken using a vessel-mounted Acoustic Doppler Current Profiler (ADCP) to analyse the spatial distribution of flow velocities, along with Conductivity-temperature-depth (CTD) profiles as well as data gathering of bathymetry and water elevations. Northward directed flow velocities were identified, with increasing velocities just before the end of the strait of the Cozumel Channel, where average velocities in the region of 0.88–1.04 m s⁻¹ were recorded. An estimation of power delivery using horizontal axis turbines was undertaken with Blade Element Momentum theory. It was estimated that nearly 3.2 MW could be supplied to Cozumel Island, amounting to about 10% of its electricity consumption. Full article