Search Results (3)

To enable accurate evaluation of satellite laser communication terminals under solar outage interference, this paper presents the design and implementation of a solar radiation simulation system targeting the 1540–1560 nm communication band. The system reconstructs co-propagating interference conditions through standardized and continuously tunable output, based on high irradiance and spectral uniformity. A compound beam homogenization structure—combining a multimode fiber and an apodizator—achieves 85.8% far-field uniformity over a 200 mm aperture. A power–spectrum co-optimization strategy is introduced for filter design, achieving a spectral matching degree of 78%. The system supports a tunable output from 2.5 to 130 mW with a 50× dynamic range and maintains power control accuracy within ±0.9%. To suppress internal background interference, a BRDF-based optical scattering model is established to trace primary and secondary stray light paths. Simulation results show that by maintaining the surface roughness of key mirrors below 2 nm and incorporating a U-shaped reflective light trap, stray light levels can be reduced to 5.13 × 10⁻¹² W, ensuring stable detection of a 10⁻¹⁰ W signal at a 10:1 signal-to-background ratio. Experimental validation confirms that the system can faithfully reproduce solar outage conditions within a ±3° field of view, achieving consistent performance in spectrum shaping, irradiance uniformity, and background suppression. The proposed platform provides a standardized and practical testbed for ground-based anti-interference assessment of optical communication terminals. Full article

Satellite networks show the development trend in global coverage, flexible access, and reliable transmission. They are the key to building a wide coverage, massive connection, three-dimensional, all-round, all-weather, space-, air- and ground-integrated information network. Due to its high frequency and large bandwidth, the laser inter-satellite link (ISL) is easily interfered with by sunlight. When sun outage occurs, the laser inter-satellite link will be interrupted for a long time. Most of the existing satellite link failure-routing algorithms are distributed and have poor load balancing capabilities. The centralized algorithm calculates paths independently for different services, and the effect is not ideal. In this paper, a local pre-rerouting algorithm (LPRA) is proposed. The center node collects the link information from the limited area before sun outage and the service information in the link that is about to be interrupted, and reroutes these services before sun outage occurs. After the occurrence of sun outage, services that originally needed to go through the failed link are forwarded according to the path calculated in advance, thereby avoiding link congestion and reducing the packet loss rate. Simulation results show that the proposed algorithm performs better than existing algorithms in terms of packet loss ratio, total delay and load balancing capabilities. Full article

It is challenging for the European power system to exactly predict RES output and match energy production with demand due to changes in wind and sun intensity and the unavoidable disruptions caused by severe weather conditions. Therefore, in order to address the so-called “flexibility challenge” and implement the variable RES production, the European Union needs flexible solutions. In order to accommodate quicker reactions, compared to those performed today, and the adaptive exploitation of flexibility, grid operators must adjust their operational business model, as the electrical grid transitions from a fully centralized to a largely decentralized system. OneNet aspires to complete this crucial step by setting up a new generation of grid services that can fully utilize distributed generation, storage, and demand responses while also guaranteeing fair, open, and transparent conditions for the consumer. Using AI methods and a cloud-computing approach, the current work anticipates that active management of the power system for TSO–DSO coordination will be improved by the web-based client-server application F-channel. In the current work, a user’s experience with the platform for a Business Use Case (BUC) under the scenario of severe weather conditions is presented. The current work aims to increase the reliability of outage and maintenance plans for the system operators (SOs) by granting them a more accurate insight into the conditions under which the system may be forced to operate in the upcoming period and the challenges that it might face based on those conditions. In this way, the methodology applied in this case could, via AI-driven data exchange and analyses, help SOs change the maintenance and outage plans so the potential grave consequences for the system can be avoided. The SOs will have accurate forecasts of the relevant weather parameters at their disposal that will be used in order to achieve the set targets. The main results of the presented work are that it has a major contribution to the optimal allocation of the available resources, ensures the voltage and frequency stability of the system, and provides an early warning for hazardous power system regimes. Full article