Search Results (4)

Currently, divers face significant safety risks when cleaning marine organisms from the steel structures of offshore underwater platform jackets. Consequently, utilizing robots instead of divers to carry out underwater biofouling removal operations will be an important development direction for the underwater maintenance of offshore platforms in the future. In this study, a wall-climbing robot was designed to clean marine organisms from the underwater surface of a platform jacket leg. The overall structure of the underwater cleaning wall-climbing robot is introduced, including the cleaning actuator and the variable curvature-adapted connecting rod mechanism. The corresponding relationship between the variable curvature-adapted connecting rod mechanism and the jacket leg is analyzed in detail. The variable curvature-adapted connecting rod mechanism was optimized using a genetic algorithm to ensure that the underwater cleaning wall-climbing robot can adapt to a minimum diameter of 1 m for the jacket leg. By drawing on Airy wave theory and random wave theory, the Airy wave parameters for waves were analyzed under different sea conditions, considering practical application scenarios. By using Fluent software 2022, a 2D numerical wave tank was constructed to simulate waves under various sea conditions, and the wave surface shapes for different sea states were determined. By building on the Morison equation, a method for calculating the horizontal wave forces on the underwater cleaning wall-climbing robot using the equivalent area and equivalent volume is proposed. By using the two aforementioned methods, the horizontal wave forces on the underwater cleaning wall-climbing robot under specific sea states were determined. The horizontal wave forces of the underwater cleaning wall-climbing robot under different sea conditions were analyzed and simulated in a 3D numerical wave tank. By comparing the theoretical analysis results with the numerical simulation results, where the maximum difference at the extreme points is approximately 11%, the feasibility of the proposed horizontal wave force estimation method was verified. Full article

Background: This article presents the system architecture and validation of the NeuroSuitUp body–machine interface (BMI). The platform consists of wearable robotics jacket and gloves in combination with a serious game application for self-paced neurorehabilitation in spinal cord injury and chronic stroke. Methods: The wearable robotics implement a sensor layer, to approximate kinematic chain segment orientation, and an actuation layer. Sensors consist of commercial magnetic, angular rate and gravity (MARG), surface electromyography (sEMG), and flex sensors, while actuation is achieved through electrical muscle stimulation (EMS) and pneumatic actuators. On-board electronics connect to a Robot Operating System environment-based parser/controller and to a Unity-based live avatar representation game. BMI subsystems validation was performed using exercises through a Stereoscopic camera Computer Vision approach for the jacket and through multiple grip activities for the glove. Ten healthy subjects participated in system validation trials, performing three arm and three hand exercises (each 10 motor task trials) and completing user experience questionnaires. Results: Acceptable correlation was observed in 23/30 arm exercises performed with the jacket. No significant differences in glove sensor data during actuation state were observed. No difficulty to use, discomfort, or negative robotics perception were reported. Conclusions: Subsequent design improvements will implement additional absolute orientation sensors, MARG/EMG based biofeedback to the game, improved immersion through Augmented Reality and improvements towards system robustness. Full article

Ever since its discovery, the applications of Shape Memory Alloys (SMA) can be found across a range of application domains, from structural design to medical technology. This is based upon the unique and inherent characteristics such as thermal Shape Memory Effect (SME) and Superelasticity (or Pseudoelasticity). While thermal SME is used for shape morphing applications wherein temperature change can govern the shape and dimension of the SMA, Superelasticity allows the alloy to withstand a comparatively very high magnitude of loads without undergoing plastic deformation at higher temperatures. These unique properties in wearables have revolutionized the field, and from fabrics to exoskeletons, SMA has found its place in robotics and cobotics. This review article focuses on the most recent research work in the field of SMA-based smart wearables paired with robotic applications for human-robot interaction. The literature is categorized based on SMA property incorporated and on actuator or sensor-based concept. Further, use-cases or conceptual frameworks for SMA fiber in fabric for ‘Smart Jacket’ and SMA springs in the shoe soles for ‘Smart Shoes’ are proposed. The conceptual frameworks are built upon existing technologies; however, their utility in a smart factory concept is emphasized, and algorithms to achieve the same are proposed. The integration of the two concepts with the Industrial Internet of Things (IIoT) is discussed, specifically regarding minimizing hazards for the worker/user in Industry 5.0. The article aims to propel a discussion regarding the multi-faceted applications of SMAs in human-robot interaction and Industry 5.0. Furthermore, the challenges and the limitations of the smart alloy and the technological barriers restricting the growth of SMA applications in the field of smart wearables are observed and elaborated. Full article

Due to the particularity of the jacket structure of offshore platforms and the complexity of the marine environment, there have been few effective localization and autonomous control methods for underwater robots that are designed for cleaning tasks. To improve this situation, a fusion bat algorithm (BA) online optimized fuzzy control method using vision localization was developed based on the constraints of the underwater operational environment. Vision localization was achieved based on images from a catadioptric panoramic imaging system. The features of the pipe edge and the boundary of the area covered by biofouling were obtained by image processing and feature extraction. The feature point chosen as the “highest” point of the boundary was calculated by projection transformation to generate the reference path. The specialized fuzzy controller was designed to drive the robot to track the reference path, and an improved bat algorithm with dynamic inertia weight and differential evolution method was developed to optimize the scale factors of the fuzzy controller online. The control method was simulated and further implemented on an underwater pipe-cleaning robot (UPCR), and the results indicate its rationality and validity. Full article