Search Results (2)

In-wheel-motor-drive electric vehicles have attracted enormous attention due to its potentials of improving vehicle performance and safety. Road surface roughness results in forced vibration of in-wheel-motor (IWM) and thus aggravates the unbalanced electric magnetic force (UEMF) between its rotor and stator. This can further compromise vertical and longitudinal vehicle dynamics. This paper presents a comprehensive study to reveal the coupled vertical–longitudinal effect on suspension-in-wheel-motor systems (SIWMS) along with a viable optimization procedure to improve ride comfort and handling performance. First, a UEMF model is established to analyze the mechanical–electrical–magnetic coupling relationship inside an IWM. Then a road–tire–ring force (RTR) model that can capture the transient tire–road contact patch and tire belt deformation is established to accurately describe the road–tire and tire–rotor forces. The UEMF and the RTRF model are incorporated into the quarter-SIWMS model to investigate the coupled vertical–longitudinal vehicle dynamics. Through simulation studies, a comprehensive evaluation system is put forward to quantitatively assess the effects during braking maneuvers under various road conditions. The key parameters of the SIWMS are optimized via a multi-optimization method to reduce the adverse impact of UEMF. Finally, the multi-optimization method is validated in a virtual prototype which contains a high-fidelity multi-body model. The results show that the longitudinal acceleration fluctuation rate and the slip ratio signal-to-noise ratio are reduced by 5.07% and 6.13%, respectively, while the UEMF in the vertical and longitudinal directions varies from 22.2% to 34.7%, respectively, and is reduced after optimization. Thus, the negative coupling effects of UEMF are minimized while improving the ride comfort and handling performance. Full article

This study aims to improve the vehicle vertical dynamics performance in the sprung and unsprung state for in-wheel-motor-driven electric vehicles (IWMD EVs) while considering the unbalanced electric magnetic force effects. An integrated vibration elimination system (IVES) is developed, containing a dynamic vibration-absorbing structure between the IWM and the suspension. It also includes an active suspension system based on a delay-dependent $H\infty$ controller. Further, a novel frequency-compatible tire (FCT) model is constructed to improve IVES accuracy. The mechanical-electrical-magnetic coupling effects of IWMD EVs are theoretically analyzed. A virtual prototype for the IVES is created by combining the CATIA, ADAMS, and MatLab/Simulink, resulting in a high-fidelity multi-body model, validating the IVES accuracy and practicability. Simulations for the IVES considered three different suspension structure types and time delay considerations were performed. Analyses in frequency and time domains for the simulation results have shown that the root mean square of sprung mass acceleration and the eccentricity are significantly reduced via the IVES, indicating an improvement in ride comfort and IWM vibration suppression. Full article