Search Results (3)

In this article, an ultra-wideband (UWB) antenna featuring two reconfigurable quasi-perfect stop bands at WLAN (5.25–5.75 GHz) and lower 5G (3.4–3.8 GHz) utilizing electromagnetic bandgaps (EBGs) and positive-intrinsic-negative (P-I-N) diodes is proposed. A pair of EBG structures are applied to generate sharp notch bands in the targeted frequency spectrum. Each EBG creates a traditional notch, while two regular notches are combined to make a quasi-perfect, sharp, notch band. Four P-I-N diodes are engraved into the EBG structures to enable notch band reconfigurability. By switching the operational condition of the four diodes, the UWB antenna can dynamically adjust its notching characteristics to enhance its adaptability to various communication standards and applications. The antenna can be reconfigured as a UWB (3–11.6 GHz) without any notch band, a UWB with a single sharp notch (either at WLAN or 5G), or a UWB with two quasi-perfect notch bands. Moreover, the antenna’s notch bands can also be switched from a traditional notch to a quasi-perfect notch and vice versa. To confirm the validity of the simulated outcomes, the proposed reconfigurable UWB antenna is fabricated and measured. The experimental findings are aligned closely with simulation results, and the antenna offers notch band reconfigurability. The antenna shows a consistently favorable radiation pattern and gain. The dimension of the presented antenna is 20 × 27 × 1.52 mm³ (0.45 λc × 0.33 λc × 0.025 λc, where λc is the wavelength in free space). Full article

This study describes the design and implementation of a small printed ultra-wideband (UWB) antenna for smart electronic systems with on-demand adjustable notching properties. A contiguous sub-band between 3–4.1 GHz, 4.45–6.5 GHz, or for both bands concurrently, can be mitigated by the antenna. Numerous technologies and applications, including WiMAX, Wi-Fi, ISMA, WLAN, and sub-6 GHz, primarily utilize these band segments remitted by the UWB. The upper notch band is implemented by inserting an open-ended stub with the partial ground plane; the lower notch band functionality is obtained by etching a U-shaped slot from the radiating structure. The basic UWB mode is then changed to a UWB mode, with a single or dual notch band, using two diodes to achieve reconfigurability. The antenna has a physically compact size of 17 × 23 mm² and a quasi-omnidirectional maximum gain of 4.9 dBi, along with a high efficiency of more than 80%, according to both simulation and measurement data. A significant bandwidth in the UWB region is also demonstrated by the proposed design, with a fractional bandwidth of 180% in relation to the 5.2 GHz center frequency. Regarding compactness, consistent gain, and programmable notch features, the proposed antenna outperforms the antennas described in the literature. In addition to these benefits, the antenna’s compact size makes it simple to incorporate into small electronic devices and enables producers to build many antennas without complications. Full article

Narrowband antennas fail to radiate short pulses of nano- or picosecond length over the broader band of frequencies. Therefore, Ultrawideband (UWB) technology has gained momentum over the past couple of years as it utilizes a wide range of frequencies, typically between 3.1–10.6 GHz. UWB antennas have been utilized for various applications such as ground-penetrating radars, disaster management through detection of unexploded mines, medical diagnostics, and commercial applications ranging from USB dongles to detection of cracks in highways and bridges. In the first section of the manuscript, UWB technology is detailed with its importance for future wireless communications systems. In the next section various types of UWB antennas and their design methodology are reviewed, and their important characteristics are highlighted. In section four the concept of a UWB notch antenna is presented. Here various methods to obtain the notch, such as slots, parasitic resonators, metamaterials, and filters are discussed in detail. In addition, various types of important notch antenna design with their technical specifications, advantages, and disadvantages are presented. Finally, the need of reconfigurable UWB notch antennas is discussed in the next section. Here various insight to the design of frequency reconfigurable notch antennas is discussed and presented. Overall, this article aims to showcase the beginnings of UWB technology, the reason for the emergence of notching in specific frequency bands, and ultimately the need for reconfiguring UWB antennas along with their usage. Full article