Search Results (6)

The early identification of rotten potatoes is one of the most important challenges in a storage facility because of the inconspicuous symptoms of rot, the high density of storage, and environmental factors (such as temperature, humidity, and ambient gases). An electronic nose system based on an ensemble convolutional neural network (ECNN, a powerful feature extraction method) was developed to detect potatoes with different degrees of rot. Three types of potatoes were detected: normal samples, slightly rotten samples, and totally rotten samples. A feature discretization method was proposed to optimize the impact of ambient gases on electronic nose signals by eliminating redundant information from the features. The ECNN based on original features presented good results for the prediction of rotten potatoes in both laboratory and storage environments, and the accuracy of the prediction results was 94.70% and 90.76%, respectively. Moreover, the application of the feature discretization method significantly improved the prediction results, and the accuracy of prediction results improved by 1.59% and 3.73%, respectively. Above all, the electronic nose system performed well in the identification of three types of potatoes by using the ECNN, and the proposed feature discretization method was helpful in reducing the interference of ambient gases. Full article

Modeling the quantitative relationship between target components and measured spectral information is an essential part of laser-induced breakdown spectroscopy (LIBS) analysis. However, many traditional multivariate analysis algorithms must reduce the spectral dimension or extract the characteristic spectral lines in advance, which may result in information loss and reduced accuracy. Indeed, improving the precision and interpretability of LIBS quantitative analysis is a critical challenge in Mars exploration. To solve this problem, this paper proposes an end-to-end lightweight quantitative modeling framework based on ensemble convolutional neural networks (ECNNs). This method eliminates the need for dimensionality reduction of the raw spectrum along with other pre-processing operations. We used the ChemCam calibration dataset as an example to verify the effectiveness of the proposed approach. Compared with partial least squares regression (a linear method) and extreme learning machine (a nonlinear method), our proposed method resulted in a lower root-mean-square error for major element prediction (54% and 73% lower, respectively) and was more stable. We also delved into the internal learning mechanism of the deep CNN model to understand how it hierarchically extracts spectral information features. The experimental results demonstrate that the easy-to-use ECNN-based regression model achieves excellent prediction performance while maintaining interpretability. Full article

Diabetic retinopathy (DR) and diabetic macular edema (DME) are forms of eye illness caused by diabetes that affects the blood vessels in the eyes, with the ground occupied by lesions of varied extent determining the disease burden. This is among the most common cause of visual impairment in the working population. Various factors have been discovered to play an important role in a person’s growth of this condition. Among the essential elements at the top of the list are anxiety and long-term diabetes. If not detected early, this illness might result in permanent eyesight loss. The damage can be reduced or avoided if it is recognized ahead of time. Unfortunately, due to the time and arduous nature of the diagnosing process, it is harder to identify the prevalence of this condition. Skilled doctors manually review digital color images to look for damage produced by vascular anomalies, the most common complication of diabetic retinopathy. Even though this procedure is reasonably accurate, it is quite pricey. The delays highlight the necessity for diagnosis to be automated, which will have a considerable positive significant impact on the health sector. The use of AI in diagnosing the disease has yielded promising and dependable findings in recent years, which is the impetus for this publication. This article used ensemble convolutional neural network (ECNN) to diagnose DR and DME automatically, with accurate results of 99 percent. This result was achieved using preprocessing, blood vessel segmentation, feature extraction, and classification. For contrast enhancement, the Harris hawks optimization (HHO) technique is presented. Finally, the experiments were conducted for two kinds of datasets: IDRiR and Messidor for accuracy, precision, recall, F-score, computational time, and error rate. Full article

Diabetic Retinopathy (DR) is a predominant cause of visual impairment and loss. Approximately 285 million worldwide population is affected with diabetes, and one-third of these patients have symptoms of DR. Specifically, it tends to affect the patients with 20 years or more with diabetes, but it can be reduced by early detection and proper treatment. Diagnosis of DR by using manual methods is a time-consuming and expensive task which involves trained ophthalmologists to observe and evaluate DR using digital fundus images of the retina. This study aims to systematically find and analyze high-quality research work for the diagnosis of DR using deep learning approaches. This research comprehends the DR grading, staging protocols and also presents the DR taxonomy. Furthermore, identifies, compares, and investigates the deep learning-based algorithms, techniques, and, methods for classifying DR stages. Various publicly available dataset used for deep learning have also been analyzed and dispensed for descriptive and empirical understanding for real-time DR applications. Our in-depth study shows that in the last few years there has been an increasing inclination towards deep learning approaches. 35% of the studies have used Convolutional Neural Networks (CNNs), 26% implemented the Ensemble CNN (ECNN) and, 13% Deep Neural Networks (DNN) are amongst the most used algorithms for the DR classification. Thus using the deep learning algorithms for DR diagnostics have future research potential for DR early detection and prevention based solution. Full article

Many algorithms have been developed for automated electrocardiogram (ECG) classification. Due to the non-stationary nature of the ECG signal, it is rather challenging to use traditional handcraft methods, such as time-based analysis of feature extraction and classification, to pave the way for machine learning implementation. This paper proposed a novel method, i.e., the ensemble of depthwise separable convolutional (DSC) neural networks for the classification of cardiac arrhythmia ECG beats. Using our proposed method, the four stages of ECG classification, i.e., QRS detection, preprocessing, feature extraction, and classification, were reduced to two steps only, i.e., QRS detection and classification. No preprocessing method was required while feature extraction was combined with classification. Moreover, to reduce the computational cost while maintaining its accuracy, several techniques were implemented, including All Convolutional Network (ACN), Batch Normalization (BN), and ensemble convolutional neural networks. The performance of the proposed ensemble CNNs were evaluated using the MIT-BIH arrythmia database. In the training phase, around 22% of the 110,057 beats data extracted from 48 records were utilized. Using only these 22% labeled training data, our proposed algorithm was able to classify the remaining 78% of the database into 16 classes. Furthermore, the sensitivity ( $S_n$ ), specificity ( $S_p$ ), and positive predictivity ( $P_p$ ), and accuracy ( $Acc$ ) are 99.03%, 99.94%, 99.03%, and 99.88%, respectively. The proposed algorithm required around 180 μs, which is suitable for real time application. These results showed that our proposed method outperformed other state of the art methods. Full article

In this study, we present the Ensemble Convolutional Neural Network (ECNN), an elaborate CNN frame formulated based on ensembling state-of-the-art CNN models, to identify village buildings from open high-resolution remote sensing (HRRS) images. First, to optimize and mine the capability of CNN for village mapping and to ensure compatibility with our classification targets, a few state-of-the-art models were carefully optimized and enhanced based on a series of rigorous analyses and evaluations. Second, rather than directly implementing building identification by using these models, we exploited most of their advantages by ensembling their feature extractor parts into a stronger model called ECNN based on the multiscale feature learning method. Finally, the generated ECNN was applied to a pixel-level classification frame to implement object identification. The proposed method can serve as a viable tool for village building identification with high accuracy and efficiency. The experimental results obtained from the test area in Savannakhet province, Laos, prove that the proposed ECNN model significantly outperforms existing methods, improving overall accuracy from 96.64% to 99.26%, and kappa from 0.57 to 0.86. Full article