Search Results (6)

This study set out to investigate the impact of aluminum-magnesium hydroxycarbonates (LHs) with various Mg/Al ratios on the formation of hybrid pigments. The colorants were also evaluated for their flame-retardant properties. In the first part of the study, the hybrid pigments were submitted to comprehensive characterization using time-of-flight secondary ion mass spectrometry (TOF-SIMS), ²⁷Al solid-state nuclear magnetic resonance (NMR) spectroscopy, powder X-ray diffraction analysis (XRD), thermogravimetric analysis (TGA), and N₂ adsorption as well as scanning and transmission electron microscopy (SEM/STEM). The relationship between the Mg/Al ratios of the LH carriers and the formation of lake pigments was explored. The TOF-SIMS spectrum of LH modified with azo chromophore (AC) showed an intense peak for the C₁₉H₁₅O₅N₂Mg⁺ ion, confirming metal-dye interactions. Incorporation of the organic colorant into the LH host enhanced its resistance to dissolution in organic solvent (butyl acetate), as well as improving its color stability under elevated temperatures. The second part of the study evaluated the flammability of ethylene-norbornene (EN) composites, in which the pigments had been applied as colorants. Cone calorimetry revealed that addition of the organic-inorganic pigments resulted in a substantial improvement of the flame retardancy, reflected by the decreased values of the heat release rate (HRR_MAX) and total heat release parameter (THR) of the EN composites in comparison to a neat sample (unfilled EN). Full article

In this study, we produced a new organic-inorganic hybrid pigment based on a natural chromophore. Lawsone was selected as the active organic compound and incorporated into aluminum-magnesium hydroxycarbonate (LH). The hydroxynaphthoquinone derivative lawsone (Lawsonia inermis L.) is a naturally occurring dye, which is commonly used as a colorant because of its nontoxicity and biological functions. The structure and stability of the hybrid colorant were investigated using 27-Al solid-state nuclear magnetic resonance (NMR) spectroscopy, X-ray diffraction (XRD), secondary ion mass spectrometry (TOF-SIMS), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and UV-Vis spectroscopy. TOF-SIMS and ²⁷Al NMR spectroscopy revealed interactions between the dye molecules and metal ions present in the LH host, confirming successful formation of an LH-based hybrid (LH/lawsone). In the next part of the study, we examined the effect of the hybrid pigment on the mechanical and thermal properties of ethylene-norbornene (EN) materials, as well as the aging resistance of the colored composites to irradiation across the full solar spectrum. Dynamic mechanical analysis (DMA) and the results of tensile break tests revealed that the EN+LH/lawsone composite had significantly better resistance to solar irradiation in comparison to EN and EN with an unmodified carrier. Full article

In this study, novel organic–inorganic composites were prepared by the complexation of dicarboxylic azo dye (AD) with aluminum–magnesium hydroxycarbonate (AlMg–LH). This procedure provides an effective method for the stabilization of dicarboxylic organic chromophores on an AlMg−LH host. The structures of the hybrid composites were examined by X-ray diffraction (XRD), secondary ion mass spectrometry (TOF-SIMS), 27-Al solid-state nuclear magnetic resonance (NMR) spectroscopy, thermogravimetric analysis (TGA) and scanning transmission electron microscopy (STEM). The TOF-SIMS method was applied to investigate the metal–dye interactions and to monitor the thermal stability of the organic–inorganic complexes. Secondary ion mass spectrometry confirmed the presence of a characteristic peak for C₁₈H₁₀O₅N₂Mg₂²⁺, indicating that both carboxylic groups interacted with AlMg−LH by forming complexes with two Mg²⁺ ions. Modification with hybrid pigments affected the crystal structure of the AlMg−LH mineral, as shown by the appearance of new peaks on the X-ray diffraction patterns. Adsorption of the dicarboxylic chromophore not only led to significantly enhanced solvent resistance but also improved the thermal and photostability of the hybrid pigments. We propose a possible arrangement of the azo dye in the inorganic matrix, as well as the presumed mechanism of stabilization. Full article

In this study, hybrid pigments based on carminic acid (CA) were synthesized and applied in polymer materials. Modification of aluminum-magnesium hydroxycarbonate (LH) with CA transformed the soluble chromophore into an organic-inorganic hybrid colorant. Secondary ion mass spectroscopy (TOF-SIMS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and UV-Vis spectroscopy were used to study the structure, composition, and morphology of the insoluble LH/CA colorant. Successful modification of the LH was confirmed by the presence of interactions between the LH matrix and molecules of CA. XPS analysis corroborated the presence of CA complexes with Mg²⁺ ions in the LH host. The batochromic shift in UV-Vis spectra of the organic-inorganic hybrid colorant was attributed to metal-dye interactions in the organic-inorganic hybrid colorants. Strong metal-dye interactions may also be responsible for the improved solvent resistance and chromostability of the modified LH. In comparison to uncolored ethylene-norbornene copolymer (EN), a modified EN sample containing LH/CA pigment showed lower heat release rate (HRR) and reduced total heat release (THR), providing the material with enhanced flame retardancy. Full article

This paper describes the fabrication of a new hybrid pigment made from 1,2-dihydroxyanthraquinone (alizarin) on a mixed oxide host (aluminum-magnesium hydroxycarbonate, LH). Various tools were applied to better understand the interactions between the organic (alizarin) and inorganic (LH) components, including ion mass spectroscopy (TOF-SIMS), 27-Aluminm solid-state nuclear magnetic resonance (NMR) spectroscopy, X-ray diffraction (XRD), and thermogravimetric analysis (TGA). TOF-SIMS showed that modification of the LH had been successful and revealed the presence of characteristic ions C₁₄H₇O₄Mg⁺ and C₁₄H₆O₅Al⁻, suggesting interactions between the organic chromophore and both metal ions present in the mixed oxide host. Interactions were also observed between Al³⁺ ions and Alizarin molecules in ²⁷Al NMR spectra, with a chemical shift detected in the case of the modified LH matrix. Any changes in color following reactions with Mg²⁺ and Al³⁺ ions were observed. Some of the physicochemical properties of alizarin, such as resistance to dissolution and color stability at elevated temperatures, were improved in comparison to the pure dye. This effect can be attributed to strong dye-LH interactions and the effective transformation of alizarin into an insoluble form. Moreover, the pigments exhibited higher thermal resistance and greater color stability in comparison to commercially available alizarin lakes (Alizarin Crimson). Full article

This study presents the preparation and characterization of new organic-inorganic pigments based on aluminum-magnesium hydroxycarbonate (LH) and azo dyes. Solvent resistance studies, XRD, SEM, and TGA confirmed the successful formation of hybrid pigments, which were characterized in terms of their physicochemical properties. The new hybrid pigments were applied in acrylonitrile-butadiene (NBR) and ethylene-propylene (EPM) rubber composites and cured with sulfur and peroxide curing systems, respectively. The mechanical properties, dispersion quality, and flame-retardant properties of the NBR/hybrid and EPM/hybrid pigment composites were determined by dynamic mechanical analysis (DMA), SEM, and microscale combustion calorimetry (MCC). Complex experimental investigations revealed that the layered nature of hybrid pigments could improve the barrier ability and flame retardancy of elastomer composites. In comparison to unmodified aluminum-magnesium hydroxycarbonate, the modified LH dye structures contributed to significantly decrease the heat release rate and the total heat release of the NBR and EPM composites, offering a new approach to imparting low flammability to elastomer materials. Full article