Next Article in Journal
Direct Current Electrical Performances of Cable Accessory Insulation EPDM Modified by Grafting Polar-Group Compound
Previous Article in Journal
Shear Bond Strength of Polypropylene Fiber in Orthodontic Adhesive on Glazed Monolithic Zirconia
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Wu et al. 3D Thermal Network Supported by CF Felt for Improving the Thermal Performance of CF/C/Epoxy Composites. Polymers 2021, 13, 980

1
College of Ocean Science and Engineering and Merchant Marine College, Shanghai Maritime University, Shanghai 201306, China
2
School of Materials Science and Engineering, Central South University, Changsha 410083, China
3
Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology & Engineering, Chinese Academy of Sciences, Ningbo 315201, China
*
Authors to whom correspondence should be addressed.
These authors contributed equally to this work.
Polymers 2022, 14(21), 4628; https://doi.org/10.3390/polym14214628
Submission received: 19 September 2022 / Accepted: 19 October 2022 / Published: 31 October 2022
(This article belongs to the Section Polymer Composites and Nanocomposites)

Error in Table

In the original article [1], there was a mistake in Table 1. The volume fraction of the CF/C was wrongly displayed in the original table. The corrected Table 1 appears below. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. The original article has been updated.

Reference

  1. Wu, X.; Gao, Y.; Jiang, T.; Zheng, L.; Wang, Y.; Tang, B.; Sun, K.; Zhao, Y.; Li, W.; Yang, K.; et al. 3D Thermal Network Supported by CF Felt for Improving the Thermal Performance of CF/C/Epoxy Composites. Polymers 2021, 13, 980. [Google Scholar] [CrossRef] [PubMed]
Table 1. The loading of the CF/C in the various CF composites.
Table 1. The loading of the CF/C in the various CF composites.
SamplesCF/C [vol%]CF/C [wt%]
CF/C/EP-111.317.0
CF/C/EP-1.515.823.3
CF/C/EP-222.832.2
CF/C/EP-2.525.335.2
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Wu, X.; Gao, Y.; Jiang, T.; Zheng, L.; Wang, Y.; Tang, B.; Sun, K.; Zhao, Y.; Li, W.; Yang, K.; et al. Correction: Wu et al. 3D Thermal Network Supported by CF Felt for Improving the Thermal Performance of CF/C/Epoxy Composites. Polymers 2021, 13, 980. Polymers 2022, 14, 4628. https://doi.org/10.3390/polym14214628

AMA Style

Wu X, Gao Y, Jiang T, Zheng L, Wang Y, Tang B, Sun K, Zhao Y, Li W, Yang K, et al. Correction: Wu et al. 3D Thermal Network Supported by CF Felt for Improving the Thermal Performance of CF/C/Epoxy Composites. Polymers 2021, 13, 980. Polymers. 2022; 14(21):4628. https://doi.org/10.3390/polym14214628

Chicago/Turabian Style

Wu, Xinfeng, Yuan Gao, Tao Jiang, Lingyu Zheng, Ying Wang, Bo Tang, Kai Sun, Yuantao Zhao, Wenge Li, Ke Yang, and et al. 2022. "Correction: Wu et al. 3D Thermal Network Supported by CF Felt for Improving the Thermal Performance of CF/C/Epoxy Composites. Polymers 2021, 13, 980" Polymers 14, no. 21: 4628. https://doi.org/10.3390/polym14214628

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop