Search Results (2)

In order to evaluate the physical and chemical properties of polymer surfactants and analyze their oil displacement mechanisms, three types of poly-surfactant used in the Daqing oil field were chosen to be researched, and the oil displacement effects were studied using poly-surfactants of different viscosity, dehydrating rate, and core permeability. The main purpose is to determine the reasonable range of different characteristic indexes of polymeric surfactant flooding. The oil displacement effect of 15 cores was analyzed, and the effects of viscosity, the dehydrating rate of emulsion, and permeability on EOR (Enhanced Oil Recovery) were analyzed. The oil displacement mechanisms of polymeric surfactants were researched using a photolithographic glass core. This paper explores the mechanism underlying production enhancement as an EOR target, while simultaneously conducting laboratory tests to assess the physical and chemical properties of polymeric surfactants. The poly-surfactant agents exhibit a notable increase in viscosity, with the optimal displacement effect observed at a core effective permeability exceeding 400 mD, resulting in a potential EOR of 15% or higher. Moreover, at a viscosity ranging between 40 and 70 mPa·s, the total EOR can reach 73%, with the peak efficiency occurring at a viscosity of 60 mPa·s. The water loss rate of the emulsion, ranging between 30% and 70%, achieves optimal performance at 50%. The poly-surfactants’ higher viscosity extends the oil sweep area, enhancing recovery efficiency, and noticeably reducing residual oil compared to water flooding. During poly-surfactant flooding, a substantial amount of residual oil is extracted and transformed into droplets. The rapid emulsification of the polymeric surfactant solution with crude oil forms a stable emulsion, contributing to its significant oil recovery effect. This research provides valuable technical support for EOR in thin and low-quality reservoirs of onshore multi-layered sandstone reservoirs. Full article

The extraction of shale gas from onshore and offshore shale gas reservoirs will play an important role in meeting China’s future energy needs, which will not only help alleviate the energy crisis but also contribute to climate change mitigation. As for the target shale formation enriched by thin sandstone layers in typical basins, an analytical calculation method is proposed to perform pressure analysis for multi-layer shale gas reservoirs considering the adsorption–desorption characteristics of shale layer and the interlayer cross-flow. Firstly, the changes in storage capacity and flow resistance are obtained by using the distance of investigation equation. According to the electrical analogy, the equivalent total storage capacity and flow resistance can be calculated considering the sandstone-shale crossflow. Because production from one time step to the other causes depletion of the storage capacity, the reservoir pressure in different time steps can be calculated based on the material balance equation. Numerical models have been constructed based on three typical reservoir lithology combinations (sandstone-shale, shale-sandstone-shale and sandstone-shale-sandstone) to validate the accuracy of the proposed analytical calculation method. Furthermore, three important factors (porosity, the ratio of horizontal/vertical permeability (k_h/k_v) and the layer thickness) have been selected for the sensitivity analysis to verify the stability. The comparative results indicate that the proposed analytical calculation method is suitable for pressure analysis in shale gas reservoirs containing thin sandstone layers. It will provide theoretical support for the further enhancement of the production of this type of gas reservoirs. Full article