Search Results (4)

For arsenic decontamination from groundwater, arsenic crystallization is becoming adopted due to its sustainability and economic benefits. However, arsenic crystallization technology is a two-step process, which makes it complex and generates hazardous waste. Successful efforts toward making it a single-step process are presented here. The addition of nanorods and ball-milled zinc sulfide nanoparticles to arsenic-contaminated water result in highly monodispersed and high-arsenic-containing mineralized nanowaste with a crystalline structure similar to the mineral Tooeleite ((Fe³⁺₆(As³⁺O₃)₄SO₄(OH)₄·4H₂O)). This study reports the results of a short-term stability test based on a toxicity characteristic leaching procedure and a long-term stability test of the mineralized synthetic nanowaste produced from water treatment. The Tooeleite-like mineralized nanowaste passed short-term stability tests. Arsenic in the leachate were found to be 1.1 ± 0.2 mg L⁻¹ and 4.8 ± 0.3 mg L⁻¹ from waste generated by the nanorod and ball-milled nanoparticles, respectively. The crystallinity was well preserved, as observed from the post-stability-test diffraction patterns, consequently proving that the waste product can be non-hazardous and therefore would not require any secondary treatment before final disposal. Full article

Silica is considered one of the most prevalent components in the Earth’s shell and is synthesized for use in technological applications. Nevertheless, new methods for finding a better, cheaper, and more ecologically friendly supply of silica with less energy consumption are unavoidable. This study investigates whether nanopowders made from waste with a great silica amount (fly ash and glass) can be utilized as fillers in an epoxy glue to enhance its characteristics. Four different contents (5, 10, 15, and 20 wt%) of nano–fly ash, nanoglass, and nanosilica powder were introduced into the samples. Fourier transform infrared analysis, differential scanning calorimetry analysis, viscosity testing, and microhardness testing were conducted for nanoglass/epoxy and nano–fly ash/epoxy samples, which were compared with the silica/epoxy samples. Results indicated that the nanoglass and nano–fly ash powder have the same impact as nanosilica on the characteristics of epoxy. The hardness and viscosity of epoxy increased with the increase in the added filler. At 20 wt%, the hardness value of the nanoglass/epoxy composites was greater than that of the nanosilica/epoxy and fly ash/epoxy composites by about 15% and 7%, respectively. The results also indicated that the highest viscosity values were obtained when using nano–fly ash powder of 20 wt%. Furthermore, the modification of the epoxy by the nanoparticles had no significant effect on the values of the glass transition temperatures. Full article

Nanowaste is defined as waste derived from materials with at least one dimension in the 1–100 nm range. The nanomaterials containing products are considered as “nanoproducts” and they can lead to the development of nanomaterial-containing waste, also termed as “nanowaste”. The increased production and consumption of these engineered nanomaterials (ENMs) and nanoproducts that generate enormous amounts of nanowaste have raised serious concerns about their fate, behavior, and ultimate disposal in the environment. It is of the utmost importance that nanowaste is disposed of in an appropriate manner to avoid an adverse impact on human health and the environment. The unique properties of ENMs, combined with an inadequate understanding of appropriate treatment techniques for many forms of nanowaste, makes nanowaste disposal a complex task. Presently, there is a lack of available information on the optimized standards for identifying, monitoring, and managing nanowaste. Therefore, this review highlights concerns about nanowaste as future waste that need to be addressed. The review focuses on ENMs waste (in the form of NP, nanotubes, nanowires, and quantum dots) generated from the manufacture of a wide variety of nanoproducts that end up as nanowaste and adversely affect the environment. Furthermore, the review considers different types of ENMs in waste streams and environmental compartments (i.e., soil, water, and air). Detailed studies are still required to identify data gaps and implement strategies to remove and control this future waste. Full article

Nanoparticles of graphene and carbon nanotubes are attractive materials for the improvement of mechanical and barrier properties and for the functionality of biodegradable polymers for packaging applications. However, the increase of the manufacture and consumption increases the probability of exposure of humans and the environment to such nanomaterials; this brings up questions about the risks of nanomaterials, since they can be toxic. For a risk assessment, it is crucial to know whether airborne nanoparticles of graphene and carbon nanotubes can be released from nanocomposites into the environment at their end-life, or whether they remain embedded in the matrix. In this work, the release of graphene and carbon nanotubes from the poly(lactic) acid nanocomposite films were studied for the scenarios of: (i) biodegradation of the matrix polymer at the disposal of wastes; and (ii) combustion and fire of nanocomposite wastes. Thermogravimetric analysis in air atmosphere, transmission electron microscopy (TEM), atomic force microscopy (AFM) and scanning electron microscope (SEM) were used to verify the release of nanoparticles from nanocomposite films. The three factors model was applied for the quantitative and qualitative risk assessment of the release of graphene and carbon nanotubes from nanocomposite wastes for these scenarios. Safety concern is discussed in respect to the existing regulations for nanowaste stream. Full article