Search Results (2)

Density is a crucial parameter for quantitatively describing the physical properties of liquids. It serves as an important indicator for scientific research, production process control, pipeline transportation, and other aspects. In oil pipeline transportation and raw material processing, the real-time online measurement of liquid density is of great significance. This paper analyzes the working principle of an online vibrating tube densitometer and derives the fitting equation for temperature, pressure, and density; it also conducts experiments with an online vibrating tube liquid densitometer and establishes a traceability chain for the experimental device. The experimental setup includes a desktop densitometer system, a multi-temperature field constant-temperature stirring system, a walk-in constant-temperature box, an automatic blowing system, and a frequency acquisition and calculation system. The uncertainty of the device’s evaluation is U = 0.08 kg/m³, k = 2. We built a set of pressure-density static test systems, statically testing the online vibrating tube’s liquid-density meter vibration frequency at different pressures; the whole set of systems can be used to assess the specific density, temperature, and pressure range of online vibrating tube liquid density meters in the experimental research to derive the standard temperature. Through the experimental research, we can accurately derive the fitting coefficients under the standard temperature, specific temperature, and pressure of online vibrating tube liquid densitometers, and calculate the fitting error of online vibrating tube liquid densitometers under different temperatures and pressures within the experimental range through fitting equations and coefficients, so as to realize the practical application of online vibrating tube liquid densitometers in engineering by utilizing straight-tube-type and curved-type online vibrating tube densitometers. A preliminary study was conducted on the effects of different densities, temperatures, and pressures on the vibrating tube system’s vibration cycle. The fit coefficient and error were calculated, and the experimental results were compared to the theoretical analysis to confirm the device’s conformity. The study verified the device’s scientific and reasonable design, and demonstrated that it is feasible to use the device for follow-up research. Using this device in subsequent experiments can verify the effects of viscosity, inlet, installation, and other factors on the online vibrating tube liquid densitometer’s metrological performance. Further experimental research on the pressure–frequency–density test system and the establishment of a wide range of temperatures and pressures within the pressure standard density test system are needed to achieve a wide range of temperatures and pressures under the standard density test. Full article

The extension of the Żelazny Most tailings store facility (TSF), which is the largest in Europe, requires the transport of large amounts of tailings, e.g., from the central area of the TSF reservoir to the new southern extension (SE). In order to use the mature fine tailings deposits located under the clarified water in the TSF reservoir, which were thickened in the process of natural sedimentation, it was decided to choose suction dredgers that collect tailings a few meters from under the water surface. The dredgers, which are most commonly used for the extraction of sand or gravel, showed the ability to pump fine flotation tailings slurry in the conducted tests. However, in order to reduce the costs of the entire operation, it was necessary to control the density of the slurry. The article presents a prototype installation for measuring the efficiency of the solid phase of the “in situ” dredging process in real time. The installation was designed for the needs of dredging a deposit of tailings that were thickened in the natural sedimentation process, and which had a particle size of below 63 μm. The installation consists of a flow meter, a densimeter, and a section for measuring the head loss of the flow of the slurry. The applied methodology allows for the current assessment of the dredger’s operating parameters, which translates into a more effective–in terms of process efficiency–management of the dredger’s work. Full article