1 November 2023
Editorial Board Members from Biomimetics Featured among the World’s Top 2% Scientists in 2023

Scientists at Stanford University have recently published an update of the list of the top 2% most widely cited scientists—the World’s Top 2% Scientists.

The time node of the statistical data of this list is from 1960 to 2023, and it is divided into two lists: “Lifetime Scientific Influence Ranking” and “2023 Annual Scientific Influence Ranking”. The “Lifetime Scientific Influence Ranking” counts the comprehensive influence performance of scientists during their careers, and the “2023 Annual Influence Ranking” focuses on highlighting the academic influence of scientists in the previous year. This ranking, considered the most prestigious worldwide, is based on the bibliometric information contained in the Scopus database and includes more than 200,000 researchers from the more than 10 million scientists considered to be active worldwide, with 22 scientific fields and 174 subfields taken into account.

We are pleased to share that 73 Editorial Board Members from Biomimetics (ISSN: 2313-7673) were featured in World’s Top 2% Scientists list in 2023.

Name

Affiliation

Prof. Dr. Abraham Marmur

Professor Emeritus, Chemical Engineering Department, Technion - Israel Institute of Technology, Haifa 3200003, Israel

Prof. Dr. Amit Gefen

Department of Biomedical Engineering, Faculty of Engineering, Tel Aviv University, Tel Aviv 6997801, Israel

Prof. Dr. André R. Studart

Department of Materials, Eidgenössische Technische Hochschule Zürich, Vladimir-Prelog-Weg 5, HCI G539, 8093 Zurich, Switzerland

Prof. Dr. Andreas Taubert

Institute of Chemistry, University of Potsdam, Building 25, Rm. B.0.17-17, Karl-Liebknecht-Str. 24-25, D-14476 Golm, Germany

Prof. Dr. Andrew Adamatzky

Unconventional Computing Lab, Department of Computer Science and Creative Technology, University of the West of England, Bristol BS16 1QY, UK

Dr.Barbara Mazzolai

Center for Micro-BioRobotics, Istituto Italiano di Tecnologia, Pontedera, Italy

Dr. Ben Wang

School of Chemical and Environmental Engineering, Shenzhen University, Shenzhen, China

Prof. Dr. Bharat Bhushan

Nanoprobe Laboratory for Bio- & Nanotechnology and Biomimetics (NLB2), Ohio State University, Columbus, OH 43210-1142, USA

Prof. Dr. Bin Su

School of Materials Science and Engineering, Huazhong University of Science and Technology (HUST), Wuhan, China

Prof. Dr. Binbin Zhang

CAS Key Laboratory of Marine Environmental Corrosion and Bio-fouling, Institute of Oceanology, Chinese Academy of Sciences, Qingdao 266071, China

Prof. Dr. Bo Su

School of Oral and Dental Sciences, University of Bristol, Senate House, Tyndall Avenue, Bristol BS8 1TH, UK

Prof. Dr. Byeongmoon Jeong

Department of Chemistry and Nanoscience, Ewha Womans University, 52 Ewhayeodae-gil, Seodaemun-gu, Seoul, Republic of Korea

Dr. Chelladurai Karuppiah

Department of Chemical Engineering, Ming Chi University of Technology, New Taipei, Taiwan

Prof. Dr. Christopher J. Bettinger

Departments of Materials Science and Engineering and Biomedical Engineering, Carnegie Mellon University, 5000 Forbes Avenue, Wean Hall 3325, Pittsburgh, PA 15213, USA

Dr. Chunmei Ding

College of Polymer Science & Engineering, Sichuan University, No. 24 South Section 1, Yihuan Road, Chengdu 610065, China

Prof. Dr. Constantine Megaridis

Mechanical and Industrial Engineering, University of Illinois at Chicago, 842 W. Taylor St., Chicago, IL 60607-7022, USA

Prof. Dr. Damiano Pasini

Department of Mechanical Engineering, Université McGill, Montreal, QC H3A 0G4, Canada

Dr. Dario Izzo

Advanced Concepts Team, European Space Research and Technology Centre, Noordwijk, the Netherlands

Prof. Dr. Federico Carpi

Department of Industrial Engineering, University of Florence, 50139 Florence, Italy

Prof. Dr. Fei Zhou

State Key Laboratory of Mechanics and Control of Mechanical Structures, College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Prof. Dr. Giuseppe Carbone

Dipartimento di Meccanica-Matematica-Management DMMM, Campus, Via Orabona 4, 70125 Bari, Italy

Prof. Dr. Guoqiang Li

Department of Mechanical Engineering, Louisiana State University, Baton Rouge, LA 70803, USA

Prof. Dr. Haeshin Lee

Department of Chemistry, Korea Advanced Institute of Science and Technology, Daejeon, Republic of Korea

Dr. Haimin Yao

Department of Mechanical Engineering, The Hong Kong Polytechnic University, Kowloon, Hong Kong

Prof. Dr. Han Zhou

Department of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai, China

Dr. Hanxing Zhu

School of Engineering, Cardiff University, Cardiff CF24 3AA, UK

Prof. Dr. Heming Jia

Department of Information Engineering, Sanming University, Sanming 365004, China

Prof. Dr. Hermann Ehrlich

Center for Advanced Technology, Adam Mickiewicz University, 61-614 Poznan, Poland

Prof. Dr. Huiling Chen

College of Computer Science and Artificial Intelligence, Wenzhou University, Wenzhou, China

Prof. Dr. J. M. J. (Jaap) Den Toonder

Institute for Complex Molecular Systems, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, the Netherlands

Prof. Dr. Jin Huang

Chongqing Key Laboratory of Soft-Matter Material Chemistry and Function Manufacturing, School of Chemistry and Chemical Engineering, Southwest University, Chongqing 400715, China

Prof. Dr. Jing Sun

State Key Laboratory of Supramolecular Structure, Materials College of Chemistry, Jilin University, Changchun 130012, China

Prof. Dr. João F. Mano

Department of Chemistry, CICECO-Aveiro Institute of Materials, University of Aveiro, 3810-193 Aveiro, Portugal

Prof. Dr. Joseph Wang

Department of Nanoengineering, University California San Diego (UCSD), La Jolla, CA 92093-0448, USA

Prof. Dr. Julian Vincent

Nature Inspired Manufacturing Centre, School of Engineering, Heriot-Watt University, Edinburgh, UK

Prof. Dr. Junqiu Liu

College of Material, Chemistry and Chemical Engineering, Hangzhou Normal University, Hangzhou, China

Prof. Dr. Junzhi Yu

Department of Advanced Manufacturing and Robotics, College of Engineering, Peking University, Beijing 100871, China

Prof. Dr. Kamran Mohseni

1. W.P. Bushnell Endowed Chair, Department of Mechanical and Aerospace Engineering, University of Florida, Gainesville, FL 32611, USA
2. Department of Electrical & Computer Engineering, University of Florida, Gainesville, FL 32611, USA

Prof. Dr. Kenneth Dawson

School of Chemistry, University College Dublin, Dublin, Ireland

Dr. Ketul C. Popat

Department of Mechanical Engineering, School of Biomedical Engineering, Colorado State University, Fort Collins, CO 80523, USA

Prof. Dr. Malcolm L. Snead

School of Dentistry, Ostrow School of Dentistry of USC, University of Southern California, 0641 HSC, CSA 142, Los Angeles, CA 90089, USA

Prof. Dr. Marc Weissburg

Brook Byers Professor of Sustainability and Co-Director of the Center of Biologically Inspired Design, School of Biological Sciences, Georgia Institute of Technology, Atlanta, GA 30332, USA

Prof. Dr. Maria Grazia Cascone

Department of Civil and Industrial Engineering. University of Pisa, Largo Lucio Lazzarino 1, Pisa, Italy

Prof. Dr. Mehmet Sarikaya

Professor of Materials Science and Engineering, Chemical Engineering (Adjunct), Oral Health Sciences (Adjunct), Genetically Engineered Materials Science and Engineering Center, University of Washington, Seattle, WA 98195, USA

Prof. Dr. Michael N. Kozicki

School of Electrical, Computer and Energy Engineering, Arizona State University, Tempe, AZ 85287-5706, USA

Prof. Dr. Mingying Yang

Institute of Applied Bioresource Research, College of Animal Science, Zhejiang University, Yuhangtang Road 866, Hangzhou 310058, China

Prof. Dr. Paul Verschure

1. Laboratory of Synthetic Perceptive, Emotive and Cognitive Systems, Center of Autonomous Systems and Neurorobotics, Pompeu Fabra University, Roc Boronat 138, 08018 Barcelona, Spain
2. ICREA, Institució Catalana de Recerca i Estudis Avançats, Passeig Lluís Companys 23, 08010 Barcelona, Spain

Prof. Dr. Paul J Hazell

School of Engineering and Information Technology, The University Of New South Wales, UNSW Canberra, PO Box 7916, Canberra 2610, Australia

Prof. Dr. Peng Yang

College of Chemistry and Chemical Engineering, Shaanxi Normal University, Xi'an, China

Prof. Dr. Peter Fratzl

Max Planck Institute of Colloids and Interfaces, Am Mühlenberg 1, 14476 Potsdam, Germany

Prof. Dr. Phil Husbands

Department of Informatics, University of Sussex, Brighton BN1 9QJ, UK

Prof. Dr. Phillip B. Messersmith

Departments of Bioengineering and Materials Science and Engineering, University of California, Berkeley, CA, USA

Prof. Dr. R. Fried

J.B. Speed School of Engineering, University of Louisville, Louisville, KY 40292, USA

Prof. Dr. Shaoze Yan

Department of Mechanical Engineering, Tsinghua University, Beijing, China

Prof. Dr. Silvia Vignolini

Department of Chemistry, University of Cambridge, Lensfield Road, Cambridge CB2 1EW, UK

Prof. Dr. Stanislav N. Gorb

Department of Functional Morphology and Biomechanics, Zoological Institute, Kiel University, 24118 Kiel, Germany

Prof. Dr. Tatsuo Kaneko

Graduate School of Advanced Science and Technology, Japan Advanced Institute of Science and Technology, Nomi 923-1292, Japan

Prof. Dr. Thomas Speck

Plant Biomechanics Group, Botanic Garden, Faculty of Biology, University of Freiburg, Schänzlestraße 1, D 79104 Freiburg, Germany

Prof. Dr. Tony Prescott

Director of Sheffield Robotics, The Adaptive Behaviour Research Group (ABRG), Department of Psychology, The University of Sheffield, Western Bank, Sheffield S10 2TN, UK

Prof. Dr. Vipul Bansal

Ian Potter NanoBioSensing Facility, NanoBiotechnology Research Laboratory, School of Applied Sciences, RMIT University, GPO Box 2476, Melbourne, VIC 3001, Australia

Prof. Dr. Xiaodong (Chris) Li

Department of Mechanical and Aerospace Engineering, University of Virginia, Charlottesville, VA 22904, USA

Prof. Dr. Xin Yang

School of Medicine and Health, Harbin Institute of Technology, Harbin 150001, China

Prof. Dr. Xinjian Feng

College of Chemistry, Soochow University, Suzhou, China

Prof. Dr. Xu Hou

1. State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005, China
2. Fujian Provincial Key Laboratory for Soft Functional Materials Research, Research Institute for Biomimetics and Soft Matter, College of Physical Science and Technology, Xiamen University, Xiamen 361005, China

Prof. Dr. Yongmei Zheng

Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry, Beihang University, Beijing 100191, China

Prof. Dr. Yongquan Zhou

School of artificial Intelligence, Guangxi University for Nationalities, Nanning 530006, China

Prof. Dr. Yuying Yan

Faculty of Engineering, University of Nottingham, Nottingham NG7 2RD, UK

Prof. Dr. Zhaowei Chen

Institute of Food Safety and Environment Monitoring, College of Chemistry, Fuzhou University, Fuzhou 350108, China

Prof. Dr. Zhendong Dai

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Prof. Dr. Zhihong Nie

Department of Macromolecular Science, Fudan University, Shanghai, China

Prof. Dr. Zhonggang Wang

School of Traffic & Transportation Engineering, Central South University, Changsha, China

Dr. Zonghai Sheng

Shenzhen Institute of Advanced Technology, Shenzhen, China

Prof. Dr. Zuankai Wang

Department of Mechanical and Biomedical Engineering, College of Science and Engineering, City University of Hong Kong, Hong Kong, China

The latest rankings reflect the significant influence and research excellence of scientists who are committed to furthering their knowledge for the benefit of the world.

We would like to congratulate our Editorial Board Members on their excellent achievement and thank them for their immense contribution to the scientific progression and development of Biomimetics.

Back to TopTop