Submit to Special Issue Submit Abstract to Special Issue Review for Materials Propose a Special Issue

Journal Browser

► Journal Browser

Preparation and Characterization of Functional Composite Materials

Special Issue Editors
Special Issue Information
Keywords
Published Papers

A special issue of Materials (ISSN 1996-1944). This special issue belongs to the section "Advanced Composites".

Deadline for manuscript submissions: 20 October 2024 | Viewed by 5272

Share This Special Issue

Special Issue Editors

Dr. Grzegorz Kowaluk

E-Mail Website
Guest Editor

Institute of Wood Sciences and Furniture, Warsaw University of Life Sciences - SGGW, 159 Nowoursynowska St., 02-776 Warsaw, Poland
Interests: analysis and modification of technology of wood-based composites; layered, particle, and fibrous wood-based materials characterization; biomass conversion and upcycling; biopolymers; regenerated cellulose; nanoparticles; biobased materials; forestry, wood, agricultural, and plant residues
Special Issues, Collections and Topics in MDPI journals

Dr. Rene Herrera

E-Mail Website
Guest Editor

Chemical and Environmental Engineering Department, University of the Basque Country UPV/EHU, San Sebastian, Spain
Interests: wood and lignocellulosic materials; analytic techniques; biorefinery and applications; surface treatments; exploration of phenolic compounds; antioxidant capacity

Special Issue Information

Dear Colleagues,

A composite material is a combination of two materials with different physical and chemical properties. When they are combined, they create a material that is specialized to perform a certain job, for instance to become stronger, lighter, or resistant to electricity. They can also improve strength and stiffness. The reason for their use over traditional materials is that they improve the properties of their base materials and are applicable in many situations. Through continuous advancements in materials science and engineering, the potential for further applications of composite materials can be achieved by introducing functionality. Functional composite materials are based on these cutting-edge new-generation materials, and the field is located between physics, chemistry, materials science, and engineering.

Composite materials are being used for high-end applications, such as aviation technology, spaceships, and heavy-equipment manufacturing. The use of composite materials has been observed in recent advancements in the field of multifunctional composite materials. There is continuous progress related to improvements, innovations, and replacements of metals, plastics, biopolymers, etc., despite rigorous destructive and non-destructive testing, proving for example the toughness and lifelong durability of such materials. The structural functions mostly emphasize mechanical properties, such as fracture toughness, strength, thermal stability, damping, stiffness, and tensile strength. The non-structural properties include biodegradability, thermal conductivity, electrical conductivity, electromagnetic interference (EMI) shielding, and others.

The present Special Issue (SI) aims to contribute to the topics relevant to modern functional composite materials.

Dr. Grzegorz Kowaluk
Dr. Rene Herrera
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Materials is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2600 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

fiber-reinforced composites
three-dimensional composites
mechanical properties
physical properties
modeling and characterization
design of composite structures
natural fiber and bio-composites
hybrid composites

Published Papers (6 papers)

Download All Papers

Research

12 pages, 2033 KiB

Open AccessArticle

Influence of Interface Modification on the Moisture Absorption and Thermal Resistance of Ramie Fiber/Degradable Epoxy Composites

by Jingqi Geng and Yingchun Cai

Materials 2024, 17(8), 1779; https://doi.org/10.3390/ma17081779 - 12 Apr 2024

Viewed by 394

Abstract

Natural fiber/degradable epoxy composites have received much attention for their advantages of low carbon emissions, low environmental pollution, and utilization of renewable resources. However, the poor interfacial bonding strength and inferior moisture resistance of natural fiber/degradable epoxy composites restrict their application areas. In order to improve the moisture and heat resistance of natural fiber/degradable epoxy resin-based composites, this study modified the surfaces of ramie fibers with hydroxylated carbon nanotubes, silane coupling agents, and sodium hydroxide, respectively. Three types of modified ramie fiber/degradable epoxy composites, namely F-CN-DEP, F-Si-DEP, and F-OH-DEP, were prepared using a winding forming process. The water absorption rate and short-beam shear strength of the materials were tested under different environments, and the fiber morphology and thermal–mechanical properties of the materials were investigated by scanning electron microscopy (SEM) and dynamic mechanical analysis (DMA). The results show that F-CN-DEP exhibited the lowest moisture absorption rate; the highest shear strength, of 43.8 MPa; and a glass transition temperature (T_g) of 121.7 °C. The results demonstrate that carbon nanotubes on the fiber surface can improve the interfacial stability of ramie fiber/degradable epoxy composites in humid and hot environments. These results give guidelines for the development of natural fiber/degradable epoxy composites. Full article

(This article belongs to the Special Issue Preparation and Characterization of Functional Composite Materials)

► Show Figures

Figure 1

10 pages, 2836 KiB

Open AccessCommunication

Preparation of RDX/F2311/Fe₂O₃/Al Composite Hollow Microspheres by Electrospray and Synergistic Energy Release during Combustion between Components

by Zhenwei Zhang, Dong Jiang, Lanting Yang, Wenkui Song, Ruihao Wang and Qiuan Huang

Materials 2024, 17(7), 1623; https://doi.org/10.3390/ma17071623 - 2 Apr 2024

Viewed by 513

Abstract

Nanothermites and high-energy explosives have significantly improved the performance of high-energy composites and have broad application prospects. Therefore, in this study, RDX/F2311/Fe₂O₃/Al composite hollow microspheres were successfully prepared utilizing the electrospray method using F2311 as a binder between components. The results show that the combustion time of the composite hollow microspheres is shortened from 2400 ms to 950 ms, the combustion process is more stable, and the energy release is more concentrated. The H50 of the composite hollow microspheres increased from 14.49 cm to 24.57 cm, the explosion percentage decreased from 84% to 72%, and the sensitivity of the composite samples decreased significantly. This is mainly the result of the combination of homogeneous composition and synergistic reactions. The combustion results show that F2311 as a binder affects the tightness of the contact between the components. By adjusting its content, the combustion time and the intensity of the combustion of the composite microspheres can be adjusted, which provides a feasible direction for its practical application. Full article

(This article belongs to the Special Issue Preparation and Characterization of Functional Composite Materials)

► Show Figures

Figure 1

14 pages, 8409 KiB

Open AccessArticle

Study on Magnetic and Plasmonic Properties of Fe₃O₄-PEI-Au and Fe₃O₄-PEI-Ag Nanoparticles

by Shuya Ning, Shuo Wang, Zhihui Liu, Naming Zhang, Bin Yang and Fanghui Zhang

Materials 2024, 17(2), 509; https://doi.org/10.3390/ma17020509 - 21 Jan 2024

Viewed by 1036

Abstract

Magnetic–plasmonic nanoparticles (NPs) have attracted great interest in many fields because they can exhibit more physical and chemical properties than individual magnetic or plasmonic NPs. In this work, we synthesized Au- or Ag-decorated Fe₃O₄ nanoparticles coated with PEI (Fe₃O₄-PEI-M (M = Au or Ag) NPs) using a simple method. The influences of the plasmonic metal NPs’ (Au or Ag) coating density on the magnetic and plasmonic properties of the Fe₃O₄-PEI-M (M = Au or Ag) NPs were investigated, and the density of the plasmonic metal NPs coated on the Fe₃O₄ NPs surfaces could be adjusted by controlling the polyethyleneimine (PEI) concentration. It showed that the Fe₃O₄-PEI-M (M = Au or Ag) NPs exhibited both magnetic and plasmonic properties. When the PEI concentration increased from 5 to 35 mg/mL, the coating density of the Au or Ag NPs on the Fe₃O₄ NPs surfaces increased, the corresponding magnetic intensity became weaker, and the plasmonic intensity was stronger. At the same time, the plasmonic resonance peak of the Fe₃O₄-PEI-M (M = Au or Ag) NPs was red shifted. Therefore, there was an optimal coverage of the plasmonic metal NPs on the Fe₃O₄ NPs surfaces to balance the magnetic and plasmonic properties when the PEI concentration was between 15 and 25 mg/mL. This result can guide the application of the Fe₃O₄-M (M = Au or Ag) NPs in the biomedical field. Full article

(This article belongs to the Special Issue Preparation and Characterization of Functional Composite Materials)

► Show Figures

Figure 1

13 pages, 3117 KiB

Open AccessArticle

Upcycling of Wood Dust from Particleboard Recycling as a Filler in Lignocellulosic Layered Composite Technology

by Anita Wronka and Grzegorz Kowaluk

Materials 2023, 16(23), 7352; https://doi.org/10.3390/ma16237352 - 26 Nov 2023

Viewed by 741

Abstract

The following research aims to investigate selected properties of three-layer plywood, manufactured using dust from the milling of three-layer particleboard as a filler in the bonding mass. Four types of fillers were considered in the study: commercial rye flour, wood dust naturally occurring in the composition of particles used industrially for particleboard production, wood dust from the first batch of shredded particleboard, and dust from the second round of milled particleboard. The highest modulus of elasticity (MOE) values were observed for the reference samples. Notably, in the samples containing filler sourced from the secondary milling of particleboard, the MOE exhibited an upward trend in conjunction with increasing filler content. The modulus of rupture (MOR) decreased with an elevated degree of filler milling from 73.1 N mm⁻² for the native filler, through to 68.9 N mm⁻² for the filler after 1st milling, and to 54.5 N mm⁻² for the filler after 2nd milling (with 10 parts per weight (pbw) of filler used as an reference), though it increased slightly as the filler content increased. The most favorable outcomes in shear strength were achieved in samples containing filler material from the initial milling of particleboard. The thickness swelling peaked in variants utilizing filler material from both the initial and secondary milling of particleboards (20.1% and 16.6% after 24 h of soaking for samples with 10 pbw filler after the 1st and 2nd milling, respectively, compared to 13.0% for the reference samples). Water absorption testing exhibited a more pronounced response in the newly introduced variants, although the samples containing filler from the initial and secondary milling processes eventually yielded results akin to the reference sample, with naturally occurring dust displaying higher water absorption values. The highest density values (about 1224 kg m⁻³) were observed in the reference samples. A similar density profile was recorded for samples with five parts of wood flour as filler, although the density of the bonding line was slightly lower in these instances (1130 kg m⁻³). This research confirms the feasibility of applying the aforementioned dust as an alternative to conventional fillers in plywood technology. It also raises the question of how to effectively remove glue residues from wood-based composite dust, which would enhance their absorption properties. Full article

(This article belongs to the Special Issue Preparation and Characterization of Functional Composite Materials)

► Show Figures

Figure 1

15 pages, 4661 KiB

Open AccessArticle

Robotization of Three-Point Bending Mechanical Tests Using PLA/TPU Blends as an Example in the 0–100% Range

by Julia Głowacka, Łukasz Derpeński, Miłosz Frydrych, Bogna Sztorch, Błażej Bartoszewicz and Robert E. Przekop

Materials 2023, 16(21), 6927; https://doi.org/10.3390/ma16216927 - 28 Oct 2023

Cited by 3 | Viewed by 1311

Abstract

This article presents the development of an automated three-point bending testing system using a robot to increase the efficiency and precision of measurements for PLA/TPU polymer blends as implementation high-throughput measurement methods. The system operates continuously and characterizes the flexural properties of PLA/TPU blends with varying TPU concentrations. This study aimed to determine the effect of TPU concentration on the strength and flexural stiffness, surface properties (WCA), thermal properties (TGA, DSC), and microscopic characterization of the studied blends. Full article

(This article belongs to the Special Issue Preparation and Characterization of Functional Composite Materials)

► Show Figures

Graphical abstract

10 pages, 4145 KiB

Open AccessArticle

The Influence of the Content of Recycled Natural Leather Residue Particles on the Properties of High-Density Fiberboards

by Katarzyna Bartoszuk and Grzegorz Kowaluk

Materials 2023, 16(15), 5340; https://doi.org/10.3390/ma16155340 - 29 Jul 2023

Cited by 1 | Viewed by 792

Abstract

During the production of furniture, large amounts of waste materials are generated, which are most often stored in warehouses without a specific purpose for their subsequent use. In highly developed countries, as many as 25 million tons of textile waste are produced annually, of which approximately 40% is non-clothing waste such as carpets, furniture and car upholstery. The aim of this research was to produce and evaluate dry-formed high-density fiberboards (HDF) bonded with urea-formaldehyde resin, 12% resination, with various shares of recycled particles of natural leather used in upholstery furniture production at different contents (1, 5 and 10% by weight). The panels were hot-pressed (200 °C, 2.5 MPa, pressing factor 20 s mm⁻¹). Mechanical properties (modulus of rupture, modulus of elasticity and screw withdrawal resistance) and physical properties (density profile, thickness swelling after water immersion, water absorption and surface absorption) were tested. The density profile and contact angle of natural leather have been also characterized. The results show that increasing the content of leather particles in HDF mostly has a positive effect on mechanical properties, especially screw withdrawal resistance and water absorption. It can be concluded that, depending on the further use of HDF, it is possible to use recovered upholstery leather particles as a reasonable addition to wood fibers in HDF technology. Full article

(This article belongs to the Special Issue Preparation and Characterization of Functional Composite Materials)

► Show Figures

Figure 1

Journal Menu

Journal Browser

Preparation and Characterization of Functional Composite Materials

Share This Special Issue

Special Issue Editors

Special Issue Information

Keywords

Published Papers (6 papers)

Research

Further Information

Guidelines

MDPI Initiatives

Follow MDPI