SU-8 Composite Based “Lube-tape” for a Wide Range of Tribological Applications
AbstractIn a previous work, we have developed a perflouropolyether (PFPE) lubricant droplet-filled SU-8 composite which promotes bonding between the molecules of SU-8 and PFPE and provides excellent boundary lubrication. The SU-8 + PFPE composite has enhanced the wear durability of SU-8 by more than four orders of magnitude. In this work, the same SU-8 + PFPE composite was used to fabricate a stand-alone laminate film called “Lube-tape”. It has integrated two layers of approximately 90 microns thickness each; the top layer is made of SU-8 + PFPE composite and the bottom layer of pristine SU-8. Thus, a single tape can have drastically contrasting high friction and low friction properties on its two surfaces. The composite side has the initial coefficient of friction ~7 times lower and the wear life more than four orders of magnitude than those of the pristine SU-8 side. This lube tape can be used on any load bearing surface to improve the tribological performance by simply pasting the pristine SU-8 side onto the substrate. View Full-Text
Share & Cite This Article
Saravanan, P.; Satyanarayana, N.; Sinha, S.K. SU-8 Composite Based “Lube-tape” for a Wide Range of Tribological Applications. Micromachines 2014, 5, 263-274.
Saravanan P, Satyanarayana N, Sinha SK. SU-8 Composite Based “Lube-tape” for a Wide Range of Tribological Applications. Micromachines. 2014; 5(2):263-274.Chicago/Turabian Style
Saravanan, Prabakaran; Satyanarayana, Nalam; Sinha, Sujeet K. 2014. "SU-8 Composite Based “Lube-tape” for a Wide Range of Tribological Applications." Micromachines 5, no. 2: 263-274.