Next Article in Journal
The Newly Isolated Endophytic Fungus Paraconiothyrium sp. LK1 Produces Ascotoxin
Next Article in Special Issue
Prebiotic Activity of Polysaccharides Extracted from Gigantochloa Levis (Buluh beting) Shoots
Previous Article in Journal
Fluorescent Lipids: Functional Parts of Fusogenic Liposomes and Tools for Cell Membrane Labeling and Visualization
Previous Article in Special Issue
Consecutive Three-Component Synthesis of 3-(Hetero)Aryl-1H-pyrazoles with Propynal Diethylacetal as a Three-Carbon Building Block
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Review

Diversity Oriented Syntheses of Conventional Heterocycles by Smart Multi Component Reactions (MCRs) of the Last Decade

Department Chemie, Technische Universität München, Lichtenbergstr. 4, Garching 85747, Germany
Molecules 2012, 17(1), 1074-1102; https://doi.org/10.3390/molecules17011074
Submission received: 9 December 2011 / Revised: 11 January 2012 / Accepted: 12 January 2012 / Published: 20 January 2012
(This article belongs to the Special Issue Multicomponent Reaction)

Abstract

:
A collection of smart multicomponent reactions (MCRs) with continuative post condensation cyclizations (PCCs) is presented to construct conventional three- to seven-membered heterocyclic compounds in diversity oriented syntheses (DOS). These will provide a high degree of applying economical and ecological advantages as well as of practicability. Water, ionic liquids, and solvent-less syntheses as well as use of various forms of energy as microwave and ultrasonic irradiation are examined and discussed.

Graphical Abstract

1. Introduction

Multi Component Reaction (MCR) chemistry [1,2] applied to the synthesis of heterocycles [3,4,5] with all its variations and extensions has undergone an enormous and meaningful upturn. Seeds sown in the last century, particularly appreciated by Ugi [6], have grown enormously and provided a plurality of novel reactions, new smart strategies as well as forward-looking methods, and high product diversity [7,8]. In this paper syntheses of conventional three to seven-membered heterocyclic structures (aziridine, azetidine, pyrrole, pyrrolidine, furan, indole, isoindoline, pyrazole, pyrazoline, imidazole, oxazolidine, thiazole, triazole, triazolidine, tetrazole, pyridine, pyrane, isoquinoline, pyrimidine, piperazine, oxazine, tetrazine, and oxadiazepine) are presented. The heterocycles are listed in see Section 2), in ascending order, firstly by ring-size 3 to 7, secondly by number of hetero atoms 1 to 4, and thirdly by hetero atoms N, O, S.

1.1. Times and Progress

First of all, three syntheses of indole/indole derivatives, according to (1) [9], (2) [10], and (3) [11] in Scheme 1, shall demonstrate the course of time and progress in research, how reactions and their conditions became better in terms of ecology and economy, i.e., reaction temperatures fell from 360 °C to r.t. (room temperature) and −78 °C, reaction times decreased from 16 h to 30 min and product yields increased from 60% to 100% (Table 1).
Scheme 1. Indole syntheses (1)–(3) under various reaction conditions.
Scheme 1. Indole syntheses (1)–(3) under various reaction conditions.
Molecules 17 01074 g001
To compare data of not exactly identical products is problematic, but the principal trend in the different data is evident.
Table 1. Reaction data of indole syntheses (1)–(3).
Table 1. Reaction data of indole syntheses (1)–(3).
Reaction-conditionsMadelung Synth. (1)Modified Madelung (2)Saegusa Synth. (3)
Publ. year191219811977
BaseKOtBuBuLiLDA
Temp [°C]360−20 to +25−78
Time [h]n.a.160.5
Yield [%]6090100
Beyond this, (3) shows, that using an isocyanide function the reaction becomes faster. This advantage of highly reactive isocyanide reagents is also evident for isocyanide-based MCRs (I-MCRs) such as the Passerini- and Ugi-reactions [6] as well as novel I-MCRs presented in see sub-section 3.2.

1.2. Nomenclature

Due to the rapid progression of MCRs by processing additional functions and its extensions into domino- and post-condensation-cyclisations (PCCs) (sub-section 3.4 and sub-section 3.5), the hitherto existing nomenclature is no longer sufficient for many cases and becomes sometimes unwieldy and imprecise. A consequence of these impacts is a different counting of components and active functions. The latter can be emcompassed within the phrase “Multi-Function-Component-Reaction” or “MFCR”, respectively [2], and is so used in this article. i.e., when the number of functions in the reaction involved exceeds the number of components, the former will be prefixed to the latter. For example, U-5F4CR means an Ugi four component reaction with five participating functions, as is in following sub-section 2.1. Often the extension of functions will cause a domino-reaction.

2. High Diversity in Heterocycle Syntheses with MCRs

Nowadays nearly all heterocycles can be constructed using MCRs. Here, a survey of recent developments on Diversity Oriented Syntheses (DOS) will be reported [7,8]. Diversity of products is increasing by both versatile and smart MCRs and many consecutive further reactions like versatile domino-reactions and post-condensation-cyclisations (PCCs) [12,13]. This can also be achieved by an increase of the number of components, as in 5CR [14], 7CR [15], and 8CR [16], transition metal catalysed MCRs [17], and evolutionary chemistry aided MCRs [18]. Several recent diversity oriented reviews [19,20,21,22,23,24,25,26] demonstrate the high innovation and creativity in this seminal field of chemistry.

2.1. Aziridine 3, U-5F4CR, 2-Alkoxyketone + Carboxylic acid + Amine + Isocyanide [27]

Compound 1 is the bi-functional carbonyl component in the Ugi-four component reaction (U-4CR) in addition to carboxylic acid, isocyanide, and primary amine. After forming the α-adduct 2, the generated sec. amine substitutes the vicinal alkoxy-group (formerly the second function of 1). The latter reacts with the acyl function of the aza-anhydride moiety forming the carboxylic acid ester by-product. The Ugi-reaction goes on to form the target molecule, the tetra-substituted aziridine derivative 3 (Scheme 2). Yields are moderate to good (38–84%) [27].
Scheme 2. Synthesis of aziridine 3 by U-5F4CR.
Scheme 2. Synthesis of aziridine 3 by U-5F4CR.
Molecules 17 01074 g002
Further syntheses of aziridines and oxiranes are of 2-aminoketones from natural α-amino acids [28], and S-ylide-mediated 3CR of alkylsulfonium salts with imines or aldehydes [29].

2.2. Azetidinone 4, U-4F3CR, β-amino Acid + Aldehyde + Isocyanide [30]

Tri-substituted azetidinone 4 is formed easily from β-amino acids by an Ugi-4F3CR in 32–42% yield (Scheme 3) [30]. Thereby two functions amino- and carboxylic acid-groups are located in one component β-amino acid. A review on β-lactam antibiotics syntheses by similar MCRs has been published [31].
Scheme 3. Synthesis of azetidinone 4 by U-4F3CR.
Scheme 3. Synthesis of azetidinone 4 by U-4F3CR.
Molecules 17 01074 g003

2.3. Azetidine 6, 3CR, Azabicyclo[1.1.0]butane + 2,3-Dicyanofumarat + Alcohol [32]

The azabicyclo[1.1.0]butane building block 5, recently used on various occasions, reacts in a 3CR with Michael-acceptor 2,3-dicyanofumarate and alcohols to form pentasubstituted azetidines 6 in moderate to excellent yields of 52–96% (Scheme 4) [32].
Scheme 4. Synthesis of azetidine 6 by 3CR.
Scheme 4. Synthesis of azetidine 6 by 3CR.
Molecules 17 01074 g004

2.4. Pyrrole 7, H-4F3CR, 2-Ketoester + Amine + Fumaric Dichloride [33]

This Hantzsch-4F3CR forms pentasubstituted pyrrole derivatives 7 and runs solvent-less at r.t. to provide good yields (70–85%) of 7 [33]. Thereby fumaric dichloride functions as Michael acceptor for the addition of the acetoacetate. Eliminating water transforms one acyl chloride into a carboxylic acid function (Scheme 5).
Scheme 5. Synthesis of pyrrole 7 by H-4F3CR.
Scheme 5. Synthesis of pyrrole 7 by H-4F3CR.
Molecules 17 01074 g005
Another solvent-less synthesis of pyrrole from diazadiene + acetoacetate + amine has been performed with good yields of 56–84% [34].

2.5. Pyrrole 9, H-3CR, Acetylenedicarboxylate + Diacetyl + Ammonium Acetate [35]

The deactivated alkyne dialkyl acetylenedicarboxylate is activated by Ph3P and reacts with the ammonium cation at r.t. to form the aminophosphorane 8. This undergoes a Wittig reaction with diacetyl and reacts further according to Hantzsch-3CR, affording the 2,3-dimethyl.4,5-dialkoxy-carbonyl substituted pyrrole derivative 9 (Scheme 6) [35].
Scheme 6. Synthesis of pyrrole 9 by H-3CR.
Scheme 6. Synthesis of pyrrole 9 by H-3CR.
Molecules 17 01074 g006

2.6. Pyrrolidine 11, I-4CR, Aldehyde + Malodinitrile + Isocyanide + Phenanthridine [36]

First part of the I-4CR is a Knoevenagel condensation of an aromatic aldehyde with malodinitrile. This intermediate reacts with an isocyanide to form a reactive ylide 10, which adds to the azomethine function of phenanthridine, furnishing the phenanthridopyrrolidine 11 in very good to excellent yields of 90–98% (Scheme 7) [36]. Elimination of HCN does not occur.
Scheme 7. Synthesis of pyrrolidine 11 by I-4CR.
Scheme 7. Synthesis of pyrrolidine 11 by I-4CR.
Molecules 17 01074 g007
Further syntheses are a highly diastereoselective 3CR from aldehyde + aminomalonate + nitro-alkene to form 2,3,4,5-tetrasubstituted pyrrolidines [37], a chiral ruthenium porphyrin-catalyzed 3CR with chiral azomethine ylides [38], 4CRs of aldimines + acyl chlorides + alkynes + CO [39], and a reaction of alkyne + p-tolylsulfonylmethyl isocyanide (TosMIC) [40]. Two 3CRs with aniline + glyoxylate + bromobenzophenone [41] and diazoketone + nitroalkene + amine [42] have been performed. An extensive and critical review on the use of MCRs to synthesize pyrrole compounds has been published [43].

2.7. Amino-furan 13, I-3CR, Acetylenedicarboxylate + Acid + Isocyanide [44]

In an I-3CR the deactivated alkyne dialkyl acetylenedicarboxylate is activated by (Ph)3P, which also deoxygenates the carboxylic acid acyl group, generating the 1,4-dipole 12, which reacts with the isocyanide in a [4+1] cycloaddition reaction. Final aromatisation by thermodynamically driven tautomerisation affords the tetrasubstituted aminofuran derivative 13 in good yields of 74–91% [44] (Scheme 8).
Scheme 8. Synthesis of amino-furan 13 by I-3CR.
Scheme 8. Synthesis of amino-furan 13 by I-3CR.
Molecules 17 01074 g008
Further furan syntheses are a 3CR of salicylaldehyde + amine + alkyne, [45] and a 3CR performed with an imidazolium salt + alkyne + aldehyde [46].

2.8. Indole 15, 3CR, Haloarylketone + Sulfoniumylide + Amine [47]

The reaction of the ketone with the sulfonium ylide forms the epoxide intermediate 14 by elimination of dimethylsulfide. Compound 14 reacts with a primary amine in a microwave assisted Corey-Chaykovsky reaction affording the indole derivative 15 in 40–92% yield (Scheme 9) [47]. Last step is the thermodynamically driven aromatisation by β-elimination of water.
Scheme 9. Synthesis of indole 15 by Corey-Chaykovsky 3CR.
Scheme 9. Synthesis of indole 15 by Corey-Chaykovsky 3CR.
Molecules 17 01074 g009
Further indole syntheses by multi-component reactions are a new 3CR Fischer indole syntheses based on new reactions of organometallic reagents with nitriles and carboxylic acids, which extend scope and synthetic utility of these syntheses [48], MCR of indoles from 2-iodobenzoic acid [49], and highly diversified indole scaffolds by U-4CR [50].

2.9. Pyrazole 17, I-3CR, Acetylenedicarboxylate + Isocyanide + Semicarbazide [51]

The isocyanide reacts in an I-3CR with the deactivated alkyne dialkyl acetylenedicarboxylate to form a reactive dipole intermediate 16, which reacts with the hydrazine moiety of semicarbazide. In the last step formamide is eliminated as a by-product, providing the aromatic 3,4,5-trisubstituted pyrazole derivative 17 (Scheme 10) [51].
Scheme 10. Synthesis of pyrazol 17 by I-3CR.
Scheme 10. Synthesis of pyrazol 17 by I-3CR.
Molecules 17 01074 g010
A new and environmentally-friendly method for preparing dihydropyrano[2,3-c]pyrazoles in water as solvent and underultrasound irradiation has been developed [52].

2.10. Pyrazoline 19, 3CR / PCC, Cyclopropylketone + Amine + Aldehyde / + Hydrazine [53]

Cyclopropylphenylketone and p-chlorobenzaldehyde react to form the aldol addition product. This undergoes with diethylamine β-elimination of H2O affording the 3-CR product Michael acceptor 18. Methylhydrazine reacts regioselectively with 18 according to the HSAB-concept in a PCC forming the pyrazoline derivative 19 with 72% yield and an anti/syn ratio of 3 (Scheme 11) [53].
Scheme 11. Synthesis of pyrazoline 19 by 3CR/PCC.
Scheme 11. Synthesis of pyrazoline 19 by 3CR/PCC.
Molecules 17 01074 g011

2.11. Imidazole 21, U-5F4CR / PCC, Acid + Amine + 2-Ketoaldehyde + Isocyanide / + NH3 [54]

The U-4CR of benzoic acid, n-butylamine, 2-ketophenylacetaldehyde, and cyclohexylisocyanide provides 20, which reacts with ammonia (from ammonium carbonate) in a PCC cyclic amidination reaction to form the 1,2,3,5-tetrasubstituted imidazole 21, yield is 73% (Scheme 12) [54].
Scheme 12. Synthesis of imidazole 21 by U-5F4CR/PCC.
Scheme 12. Synthesis of imidazole 21 by U-5F4CR/PCC.
Molecules 17 01074 g012
Further syntheses of imidazoles are MCRs from 1,2-diketone + aryl aldehyde + amine + NH3 [55] and from aziridine + alkyne + TsN3 [56]. TosMIC-based 3CRs form 4,5-disubstituted imidazole derivatives in good yields of 62–86% [57]. 4CRs from benzil + benzaldehyde + aniline + ammonium acetate in the ionic liquid butylmethyl imidazolium bromide as solvent [58] or solvent-free with “solid carbon acid” as catalyst [59] and both conventional or microwave-assisted, provide tetraaryl-substituted imidazoles both in very good yields.

2.12. Imidazolium Salt 25, I-3CR, N-methyldihydropyridin + 2 x Isocyanide + Iodine [60]

A direct access to benzimidazolium salts has been achieved by a 3CR with N-methyl-dihydropyridine-3-carboxylate, two cyclohexyl isocyanides and iodine. The proposed reaction mechanism is rather complex. Core steps of the reaction are the double α-addition of isocyanides forming 22, the rearrangement of the dihydropyridine into the aza-bicyclo[2.2.2]octadiene structure 23. Ring-opening of 23 and ring-closure furnish the benzimidazolic zwittwerionic structure 24. Full aromatisation of 24 is thermodynamically driven and affords finally the benzimidazolium iodide 25 in a high yield of 85% (Scheme 13) [60].
A similar approach to create a mesoionic structure has been performed by a 3CR from isocyanide + isochinoline + trifuoroacetic anhydride (TFAA) forming an isochinolinoimidazoliumylide [61].
Scheme 13. Synthesis of imidazolium salt 25 by I-3CR.
Scheme 13. Synthesis of imidazolium salt 25 by I-3CR.
Molecules 17 01074 g013

2.13. Oxazolidinone 27, 3CR, Aldehyde + Amine + Alkyne + CO2 [62]

After condensation of aldehyde and amine to the imine, this reacts with the alkyne (CuI-catalyzed) to form 26. This cyclizes with carbon dioxide to afford the 3,4,5-trisubstituted 1,3-oxazolidin-2-one 27 quantitatively [62]; the overall yield is 63% (Scheme 14).
Scheme 14. Synthesis of oxazolidinone 27 by 3CR.
Scheme 14. Synthesis of oxazolidinone 27 by 3CR.
Molecules 17 01074 g014
A 3CR from isocyanoacetate + aldehyde + amine provides trisubstituted oxazoles in good yields of up to 96% [63].

2.14. Thiazole 30, Domino U-4CR / PCC, Thioacid + Amine + Isocyanide + Aldehyde [64]

A U-4CR reaction effects the transfer of the thiol group onto the isocyanide carbon atom. After tautomerization of the thio group in the Ugi product 29 into a thiol function, this adds to the Michael acceptor of the former Schöllkopf isocyanide 28 to form the 2,4-disubstituted thiazole derivative 30 in 74% yield via elimination of dimethylamine (Scheme 15) [64].
A further 2,4,5-trisubstituted thiazole domino U-4CR/PCC is prepared from oxo-components + primary amines + thiocarboxylic acids + methyl 3-bromo-2-isocyanoacrylates [65].
Scheme 15. Synthesis of thiazole 30 by U-4CR/PCC.
Scheme 15. Synthesis of thiazole 30 by U-4CR/PCC.
Molecules 17 01074 g015

2.15. Oxazino-1,2,3-triazole 33, Domino P-5F3CR / PCC [3 + 2], Propiolic Acid + Isocyanide + Azido-aldehyde [66]

In a MW-assisted Passerini-3CR propiolic acid and azidoaldehyde added to an isocyanide (α-addition) affording the α-adduct 31. The acyl group of the iminoester moiety migrates to the alcohol function of the former aldehyde moiety (acyl migration) to furnish the P-3CR product 32. The two additional acetylene and azide functions now react in a [3+2] cycloaddition forming the 1,2,3-triazole moiety of the final product 33 (Scheme 16). Azidoaldehydes are rather instable compounds, so they are employed in the synthesis as their corresponding azidoalcohols, which are oxidized by IBX directly before starting the P-3CR. Yields of 33 based on the azidoalcohols are 62–70% [66].
Scheme 16. Synthesis of oxazino-1,2,3-triazole 33 by P-5F3CR/PCC.
Scheme 16. Synthesis of oxazino-1,2,3-triazole 33 by P-5F3CR/PCC.
Molecules 17 01074 g016
Similar syntheses using U-4CRs instead of the P-3CR of before have also been performed [67]. Not a MCR, but a highly efficient Cu(I)-isocyanide complex has been developed as a heterogeneous catalyst for azide-alkyne cycloaddition in water [68] to improve click chemistry (CC) [69,70,71].

2.16. 1,2,4-Triazolidine 35, 3CR, Azodidicarboxylate + Imine + Alkyl Diazoacetate [72]

The 3CR of alkyl diazoacetate with an imine is catalyzed by ruthenium tetraphenylporphyrin (RuTPP) accompanied by the release of nitrogen and forming the strong 1,3-dipole azomethinylide 34, which reacts with the dialkyl azodicarboxylate to furnish in a stereocontrolled [3 + 2] cycloaddition reaction the pentasubstituted 1,2,4-triazolidine 35 in 70–82% yield (Scheme 17) [72].
Scheme 17. Synthesis of 1,2,4-triazolidine 35 by 3CR.
Scheme 17. Synthesis of 1,2,4-triazolidine 35 by 3CR.
Molecules 17 01074 g017
A general method for the synthesis of 1,3,5-trisubstituted 1,2,4-triazoles has been developed from 3CR of carboxylic acid + primary amidine + monosubstituted hydrazine [73]. This highly regioselec-tive one-pot process provides high diversity and yields up to 78%.

2.17. Tetrazole 37, 3CR, Formic Acid Orthoester + Amine + Azide [74]

Trimethyl orthoformate and amines react to form 36, which cyclise with HN3 to form the tetrazoles 37 in good yields of 70–92%. The reaction runs without any solvent (Scheme 18) [74].
Scheme 18. Synthesis of tetrazole 37 by 3CR.
Scheme 18. Synthesis of tetrazole 37 by 3CR.
Molecules 17 01074 g018

2.18. Tetrazolyl Isoindoline 40, Domino U-5F4CR / PCC, 2 x Cyclization Reaction, Methyl Formyl-benzoate + HN3 + Amine + Isocyanide [75]

In an U-4CR with HN3 as acidic component the α-adduct 38 is formed and a 1,5-dipolar cyclization takes place affording the tetrazole 39. A PCC by an amide generation furnishes the isoindoline in the final product 40 with yields of 68–92% (Scheme 19) [75]. I-3CR with isocyanide + bromine + azide provides 5-bromotetrazole quantitatively [76]. The bromo function can further react in a Suzuki-reaction giving a 97% yield of the subsequent product.
Scheme 19. Synthesis of tetrazolyl isoindoline 40 by U-5F4CR.
Scheme 19. Synthesis of tetrazolyl isoindoline 40 by U-5F4CR.
Molecules 17 01074 g019

2.19. Pyridine 45, Domino U-5F4CR / PCC, 2-Ketoacid + Amine + Aldehyde + Isocyanide [77]

After reaction of 2-ketocarboxylic acid, amine, aldehyde, and isocyanide the resulting U-4CR-product 41 is deprotonated by hydroxide anion to form the strong carbanion 42, which isomerizes to give 43. 1,6-Cyclization of 43 provides 44, which undergoes aromatization by dehydration to form the pyridine derivative 45 in good yields of 75 to 86% (Scheme 20) [77].
In a MW-assisted 3CR in water as solvent, isoxazolopyridines have been prepared in short reaction times of 6–9 min at temperatures of 100–130 °C and in very good yields of 84–94% [78]. Solvent-less 4CR of acetylenedicarboxylate + malonitrile + amine + aldehyde provides pentasubstituted 2-amino-pyridines in very good yields of 79–95% [79]. A 3CR of pyrimidine + indole + aminoacryl-nitrile in water as solvent furnishes pyrazopyridine in a complex structure in high yields of 75–95% [80]. Pyrazopyridines have also been synthesized in a 3CR in the IL butylmethyl imidazolium bromide or tetrafluoroborate as solvent in good yields of 79–95% [81,82].
Syntheses of pyrazolopyridines have been performed by 3CR from aldehyde + malodinitrile + aminopyrazole activated with both conventional heat (in refluxing ethanol) and ultrasound (45 kHz, 305 W, 60 °C) [83]. Yields have been 50–65% in conventional thermal and 85–98% in ultrasound driven reactions for the same ten products.
Scheme 20. Synthesis of pyridine 45 by U-5F4CR.
Scheme 20. Synthesis of pyridine 45 by U-5F4CR.
Molecules 17 01074 g020

2.20. Pyran 47, Domino I-3F3CR/PCC, Acetylenedicarboxylate + Hydroxynaphthoquinone + Isocyanide [84]

Hydroxynaphthoquinone, acetylenedicarboxylate, and isocyanide react in an I-3CR to give 46, which cyclises to form the pyran derivative 47 in good yields of 60–89% (Scheme 21) [84].
Scheme 21. Synthesis of pyrane 47 by I-3CR/PCC.
Scheme 21. Synthesis of pyrane 47 by I-3CR/PCC.
Molecules 17 01074 g021

2.21. Isoquinoline 50, 5F4CR, Alkynylbenzaldehyde + Primary Amine + Formaldehyde + Secondary Amine [85]

The Cu(I) iodide-catalyzed 5F4CR of 2-ethynylbenzaldehyde, paraformaldehyde, diisopropylamine and tert.-butylamine affords 48, which further reacts to form a strong carbanion 49. Its protonation provides the 2-aminomethylisochinoline 50 under elimination of isobutene as by-product [85] (Scheme 22).
Scheme 22. Synthesis of isoquinoline 50 by 5F4CR.
Scheme 22. Synthesis of isoquinoline 50 by 5F4CR.
Molecules 17 01074 g022

2.22. Pyridopyrimidine 52, I-4F3CR, 2-Aminopyridine + Acetylenedicarboxylate + Isocyanide [86]

Isocyanide-based 4F3CR from 2-aminopyridine, deactivated alkyne acetylenedicarboxylate, and isocyanide forms the zwitterionic compound 51, which reacts to yield the pyridopyrimidine 52 [86] (Scheme 23).
Scheme 23. Synthesis of pyridopyrimidine 52 by I-4F3CR.
Scheme 23. Synthesis of pyridopyrimidine 52 by I-4F3CR.
Molecules 17 01074 g023
2-Amino-5-cyano-pyrimidine-6-one has been synthesized by a 3CR of aldehyde + cyanoacetamide + guanidine [87]. An easy access for imidazopyrimidine derivatives from aldehyde + 1,3-diketone + 2-aminobenzimidazole with good yields of 60–82% is presented in [88].

2.23. Piperazine 55, U-4F3C, Ketocarboxylic Acid + Amine + Isocyanide [89]

In an Ugi reaction with both carboxylic acid and aldehyde functions connected in one component 53 with a neutral additional sulfonamide moiety, 53 reacts with an amine and an isocyanide to give the α-adduct 54. After the acyl-migration at 54 the 1,4,6-tetrasubstituted piperazinone-derivative 55 is formed in 45–75% yield (Scheme 24) [89]. A diversity-oriented synthesis (DOS) of a piperazine library with 90 analogs have been performed by use of MCRs [90]. A review on piperazine syntheses by MCRs has been published recently [91].
Scheme 24. Synthesis of piperazine 55 by U-4F3CR.
Scheme 24. Synthesis of piperazine 55 by U-4F3CR.
Molecules 17 01074 g024

2.24. Tetrazinane 57, 3CR, Aldehyde + Urea + Ammonia [92]

In a 3CR benzaldehyde aminoacetal 56 is formed. A sequence of metathesis reactions connect the amino functions of both 56 and urea together forming 6-aryl-1,2,4,5-tetrazinane-3-one 57 in good yields of 68–80% [92]. Two equivalents of hydrogen are released (Scheme 25).
Scheme 25. Synthesis of tetrazinane 57 by 3CR.
Scheme 25. Synthesis of tetrazinane 57 by 3CR.
Molecules 17 01074 g025
The proposed mechanism is favored by the lack of any solvent, so that N-H moieties are in direct contact with each other and are strongly activated by microwave irradiation (MW). A strong evidence for the proposed mechanism is given by comparing the data of the MW-supported reaction with the conventionally heated reaction. The MW-supported reaction rate is 15 fold and the product yield twice that of the conventionally heated process.

2.25. Oxadiazepine 59, U-6F4CR / PCC Staudinger-aza-Wittig reaction, Azidocarboxylic Acid + Aldehyde + Isocyanide + Aminoketone [93]

In an U-4CR wherein two components with two functions each, 2-aminobenzophenone, 2-azido-3-phenylpropionic acid, benzaldehyde, and cyclohexyl isocyanide react forming the Ugi product 58 in 57–75% yield. A Staudinger-aza-Wittig sequence effects the ring closure furnishing the (S)-3-benzyl-2-oxo-1,4-benzodiazepines 59, yields are 65–84% (Scheme 26) [93]. The ketone carbonyl oxygen atom is removed by triphenylphosphane.
Scheme 26. Synthesis of oxadiazepine 59 by U-6F4CR/PCC.
Scheme 26. Synthesis of oxadiazepine 59 by U-6F4CR/PCC.
Molecules 17 01074 g026

2.26. Oxadiazepine 62, Domino Aza-Wittig / I-3CR, Acetylenedicarboxylate + 1,3-Diketone + Isocyano-azaphosphorane [94]

The aza-Wittig-reaction of a 1,3-diketone with an isocyanoazaphosphorane provides the phospha-oxazetidine derivative 60, which enolises to give the isocyanide 61. This further reacts with dialkyl acetylenedicarboxylate to form the 1-oxa-3.4-diazepine derivative 62 (Scheme 27) [94].
Scheme 27. Synthesis of oxadiazepine 62 by I-3CR.
Scheme 27. Synthesis of oxadiazepine 62 by I-3CR.
Molecules 17 01074 g027

3. Strategies in Designing Novel MCRs

Several thermodynamic and reaction chemical effects as well as new strategies and new developed synthetic methods are smart and very advantageous ways to create novel MCRs.

3.1. Thermodynamic Effects

The well-known strategy to effect an easy forming of heterocyclic compounds by aromatising them has been often applied in syntheses, as illustrated by almost half the reactions in this paper. There, a resonance energy in the range of 100 kJ/mol is released. Particularly in the last step of a synthesis, the exergonic behavior makes this an irreversible one and affords good product yields. This is demonstrated by reactions with tautomerisations as the last step in sub-sections 2.7 and 2.20.
Another strategy to facilitate a reaction course is to accelerate the number of molecules on the product site of the syntheses. Thus, reaction entropy increases and facilitates cyclization. This can be done by introduction of appropriate substructures into the reaction paths, which will later become leaving groups to push the progress of the reactions, preferably in the last step. These are H2O in sub-sections 2.8, 2.11 and 2.19, MeOH in 2.17, N2 in 2.16., CO2 in 3.1.1, carboxylic acid ester in 2.1, dimethyl sulfide in 2.8, formamide in 2.9, dimethylamine in 2.14, isobutene in 2.21, isocyanate in 3.1.1, and even ketene in 3.1.2. The latter two by-products are somewhat unusual as leaving groups, so their reaction pathways will be discussed.

3.1.1. Isocyanate 63 Elimination [95]

The reaction is mediated by tert.-butyl isocyanide. By-product of the pyrrole derivative synthesis is tert.-butyl isocyanate 63, which comes from the oxygenation of tert.-butyl isocyanide with oxygen from the acyl moiety (Scheme 28), which leaves back the strong azomethineylide 1,3-dipole 64. This reacts with the acetylenedicarboxylate in a [3+2] cycloaddition affording the pentasubstituted pyrrole derivative 65 in good yield of 84% [95].
Scheme 28. Isocyanate 63 formation as by-product in a pyrrole synthesis.
Scheme 28. Isocyanate 63 formation as by-product in a pyrrole synthesis.
Molecules 17 01074 g028
A highly interesting comparison of the same pyrrole synthesis by a 4F3CR catalyzed by Pd(0), but mediated by CO instead of isocyanide has been published in the same article [95]. In this case, CO2 is formed by the oxygenation of CO.

3.1.2. Ketene 68 Elimination [96]

Nitrile and acylaminoketone react MW-assisted and fast to form 66. After eliminating the acyl residue the 3,5,6-trisubstituted 2-aminopyridine derivative 67 is formed in good yields. The side product of the synthesis is the high-energy-molecule ketene 68, which has been generated in an electrocyclic reaction of 63 and will further react (Scheme 29) [96].
Scheme 29. Ketene 68 formation as by-product in a pyridine synthesis.
Scheme 29. Ketene 68 formation as by-product in a pyridine synthesis.
Molecules 17 01074 g029

3.2. Isocyanide-Based MCRs (I-MCRs)

Various types of reactions have been presented and the corresponding reaction mechanisms described for each reaction in Section 2. Most applied functional groups in MCRs are also usual reaction partners in general chemical reactions and some reviews [97,98,99,100,101,102] have been published on the use of malodinitriles in MCRs [97], 1,3-dicarbonyl building blocks [98,99], aldehydes and β-ketoesters for Biginelli reactions [100], acetylenedicarboxylates [101], and imine-based MCRs [102].
Isocyanides 69, however, are typical MCR components [6,103,104,105,106,107,108,109], and half of the reactions presented in this paper are based on isocyanides. Within the last decade, about a thousand papers on I-MCRs have been published. This outstanding position is the consequence of isocyanides’ electronic structure as electron-rich carbenoids (Scheme 30). Whereas mesomer 69 I emphasises the nucleophiliccharacter of the isocyanide, mesomer 69 II demonstrates the carbene nature of the isocyanide with its electron deficient sextet at the C-atom. This makes an isocyanide favored to react with a nucleophile and an electrophile simultaneously in an α-addition reaction, the I-3CR (as is P-3CR in sub-section 2.15). Thereby the transition of the divalent carbon CII of the carbenoid isocyanide into the sp2-hybridised tetravalent CIV of the α-adduct of the isocyanide with two reaction partners takes place. This is the irreversible step in the reaction of isocyanide-based MCRs and drives the reaction course to the product side.
Scheme 30. Resonance effect of isocyanide 69.
Scheme 30. Resonance effect of isocyanide 69.
Molecules 17 01074 g030
Since the pioneering and seminal research on isocyanide-based MCRs by Passerini and Ugi, who recognized their enormous potential and made this chemistry presentable, many extensions and some new I-MCRs have been created. Outstanding and recently intensively researched reactions are the combination of isocyanides with electron-deficient alkynes as are dialkyl acetylenedicarboxylates, generating the reactive zwitterionic intermediate (as 16 in sub-section 2.9), which could be trapped by a third component [108,109]. Several syntheses of this type are presented in sub-section 2.7 [44], 2.9 [51], 2.20 [84], 2.22 [86], and 2.26 [94] of this paper.
Another important progress is the I-4CR from aldehyde + malodinitrile + imine + isocyanide [97]. Aldehyde and malodinitrile react in a Knoevenagel condensation forming a strong Michael acceptor, which adds as well as the imine to the isocyanide, according to the reaction in sub-section 2.6 [36], and 2.19 [79,83]. A reactive ylide-intermediate makes the reaction definite, achieving high product yields.

3.3. Isocyanide Generation

The general and common generation of isocyanides 69 is still the dehydration of the corresponding formamides 70 by dehydrating reagents such as phosgene (Scheme 31), diphosgene, triphosgene, chloroformates, phosphorous chlorides, sulfonyl chlorides, the Appel reagent (triphenylphosphine/ haloalkanes), CDC (2-chloro-1,3-dimethylimidazolium chloride), and the Burgess reagent (methyl carboxysulfamoyl-triethylammonium ylide) [110]. A solvent-free and safe process to produce phosgene from solid triphosgene in amounts ranging from grams to kilograms is given [111,112].
Scheme 31. Generation of isocyanides from formamides.
Scheme 31. Generation of isocyanides from formamides.
Molecules 17 01074 g031
A new trend may sometimes help to solve an old problem, namely how to handle the disgusting odour of isocyanides. 1,3-Oxazoles can be easily transformed into isocyanide esters 71 by ring-opening with n-BuLi and acylating the hydroxylic group formed (Scheme 32) [113]. The odours of 71 depend on the acyl group, but are all likable.
Scheme 32. Generation of isocyanides from 1,3-oxazoles.
Scheme 32. Generation of isocyanides from 1,3-oxazoles.
Molecules 17 01074 g032

3.4. Domino Reactions

Many MCRs are rather tolerant of most other functional groups and these may further react with the newly generated functions of the MCR product in a reaction cascade without additional operations. Thus a high degree of diversity can be achieved. Syntheses in sub-sections 2.14 [64], 2.15 [66], 2.18 [75], 2.19 [77], and 2.20 [84] contain domino reactions. Finally each MCR itself is a domino reaction. For nomenclature see sub-section 1.2.

3.5. Post-Condensation-Cyclizations (PCCs)

The reasons in sub-section 3.4 make MCRs also appropriate for a post-condensation-cyclization (PCC), which can build up a cyclisation reaction using the structure generated by the MCR. The PCC can be a domino reaction. Syntheses in sub-sections 2.10 [53], 2.11 [54], 2.14 [64], 2.15 [66], 2.18 [75], 2.19 [77], 2.20 [84], and 2.25 [93] contain PCCs.

3.6. Macrocyclization

The efficient access to macrocyclic structures is still rather difficult. Recent research in this field deals with MCR syntheses of macrocycles, on the approach “multiple multicomponent reaction using two bifunctional building blocks (MiBs)” [114,115].

4. New Methods in Performing Conditions to Modern Requirements

Many of the developments of the MCRs in Section 2 are impelled by modern requirements of green chemistry as using water or ionic liquids as solvents or applying solvent-less syntheses and running the reactions at r.t. as well as employing microwave, infrared, or ultrasound irradiation energy in the syntheses.

4.1. Water as Solvent

Most MCRs are tolerant of most reaction conditions and non-involved functional groups, so often water, which does not pollute the environment, can be used as solvent, as in sub-sections 2.9 [52], 2.15 [68], and 2.19 [78,80]. A review on this topic is given [116].

4.2. Ionic Liquids as Solvent

The main disadvantage of common solvents is their high vapor pressure, so that losses in the course of a synthesis can be quite substantial and this leakage may pollute the environment. Solvents with a very low vapor pressure could solve the problem. Two kinds of solvents have been proven, ionic liquids (ILs) [117] and long-chained polyethylene glycols. Both have been employed in syntheses of heterocyclic compounds by MCRs. Some syntheses in IL as solvent are described in sub-sections 2.11 [58], and 2.19 [81,82].

4.3. Solvent-Less Syntheses

From the ecological and economical points of view, it might be advantageous to run MCRs without any solvent. This will be of course supported by a high ratio of liquid components and their suitable properties. Several syntheses have been carried out with neat components, and detailed studies on this issue have been done in sub-sections 2.4 [33,34], 2.11 [59], 2.17 [74], 2.19 [79], and 2.24 [92].

4.4. Alternative Forms of Energy: Microwave, Infrared, Ultrasound Irradiation

Conventional thermal heat as a source of the required energy to bring reactions to run is generally and always employable, but this heat is not selective at all. Certain vibrations of bonds in common compounds, however, can be activated selectively and thus less energy input can achieve the same effect as by using conventional heat.
Water, water-containing and similar species with bridged O-H-O or N-H-N bonds can be activated optimally by microwave irradiation (MW). Species containing C=O bonds absorb infrared irradiation (IR) very strongly. Reactions wherein generated volatile compounds have to be transferred into the gaseous state by evaporation can be essentially supported by ultrasound.
Several MCRs in this paper have been assisted by energy from MW, as in sub-sections 2.8 [47], 2.11 [58,59], 2.15 [66], 2.19 [78], 2.24 [92], 3.1.2 [96], and in [56].
In the 3CR solvent-less synthesis of 6-aryl-1,2,4,5-tetrazinane-3-thione in sub-section 2.24 reaction times and product yields of both conventional heated and MW assisted reactions have been compared with each other [92]. The efficiency of MW on the reactions has been enormous: reaction times have been reduced to 1/15, whereas the yields doubled concurrently. This should be caused by highly polar reactants. A different effect has been observed in a 4CR synthesizing polyaryl-substituted imidazoles in the ionic liquid butylmethyl imidazolium bromide. Reaction time with heat has been half that of with MW, and yields have been similar in both cases [58]. Here the reactants have been highly non-polar. Reviews on the usage of MW in syntheses of heterocycles by MCRs are given [118,119,120,121]. An alternative energy source for reaction activation, even without solvents, is IR [122].
A novel and environmentally-friendly method for preparing dihydropyrano[2,3-c]pyrazoles in wateras solvent and under ultrasound irradiation has been developed [52]. Syntheses of pyrazolopyridines have been performed by 3CRs from aldehyde + malodinitrile + 3-aminopyrazole activated with both conventional heat and ultrasound (sub-section 2.19) [83]. Product yields of ten ultrasound activated reactions are on average 60% higher than those of the same, conventionally heated reactions.

5. Conclusions

Figure 1 presents a sketch showing the deeper insight of this review, which demonstrates a nearly unlimited up-growth of novel MCRs forming complex heterocyclic structures. Several new smart strategies in combinations of reacting diverse functional groups have been developed and widened the reaction space of MCRs and thus the scope of their application. Particularly reactions of isocyanides with deactivated alkynes such as acetylenedicarboxylates are widely deployable and eagerly investiga-ted, and other smart MCRs are distinctly coming up. But isocyanide-based MCRs still account for a great part of multi-component reactions.
Also several environmentally-friendly new tools have been employed, referring to the use of solvents and energy source. These may offer economical advantages too. Water is useful as solvent for many syntheses by MCRs, because most of their involved functional groups are neutral against water. In special cases solvent-less syntheses provide great advantages from most points of view.
Figure 1. Strategies and tools to design DOS for complex heterocycles by MCRs.
Figure 1. Strategies and tools to design DOS for complex heterocycles by MCRs.
Molecules 17 01074 g033
Often the totally unselective conventional heat can be changed by selective microwave irradiation, which may use less energy. Thereby, components may react much faster, achieving very good product yields. This can also be performed in some cases by use of ultrasonic irradiation. Thus, also in the future further substantial and increasing growth in MCRs for performing heterocycle syntheses is to be expected.

References and Notes

  1. Zhu, J.; Bienayme, H. (Eds.) Multicomponent Reactions; Wiley-VCH: Weinheim, Germany, 2005.
  2. Eckert, H. From multicomponent-reactions (MCRs) towards multi-function-component-reactions (MFCRs). Heterocycles 2007, 73, 149–158. [Google Scholar] [CrossRef]
  3. Katritzky, A.R.; Ramsden, C.A.; Scriven, E.F.V.; Taylor, R.J.K. (Eds.) Comprehensive Heterocyclic Chemistry III; Elsevier: New York, NY, USA, 2008.
  4. Pozharskii, A.F.; Soldatenkov, A.T.; Katritzky, A.R. Heterocycles in Life and Society, 2nd ed; Wiley & Sons: New York, NY, USA, 2011. [Google Scholar]
  5. Hemming, K. Heterocyclic chemistry. Annu. Rep. Prog. Chem. B 2011, 107, 118–137. [Google Scholar] [CrossRef]
  6. Ugi, I. (Ed.) Isonitrile Chemistry; Academic Press: New York, NY, USA, 1971.
  7. Orru, R.V.A.; Ruijter, E. (Eds.) Synthesis of Heterocycles via Multicomponent Reactions I; Topics in Heterocyclic Chemistry; Springer Verlag: New York, NY, USA, 2010; Volume 23.
  8. Orru, R.V.A.; Ruijter, E. (Eds.) Synthesis of Heterocycles via Multicomponent Reactions II; Topics in Heterocyclic Chemistry; Springer Verlag: New York, NY, USA, 2010; Volume 25.
  9. Madelung, W. ber eine neue Darstellungsweise für substituierte Indole. Ber. Dtsch. Chem. Ges. 1912, 45, 1128. [Google Scholar] [CrossRef]
  10. Houlihan, W.J.; Parrino, V.A.; Uike, Y. Lithiation of N-(2-alkylphenyl)-alkanamides and related compounds. A modified Madelung indole synthesis. J. Org. Chem. 1981, 46, 4511–4515. [Google Scholar] [CrossRef]
  11. Ito, Y.; Kobayashi, K.; Saegusa, T. An efficient synthesis of indole. J. Am. Chem. Soc. 1977, 99, 3532–3534. [Google Scholar] [CrossRef]
  12. Burke, M.D.; Schreiber, S.L. A planning strategy for diversity-oriented synthesis. Angew. Chem. Int. Ed. Engl. 2004, 43, 47–58. [Google Scholar]
  13. Sunderhaus, J.D.; Martin, S.F. Applications of multicomponent reactions to the synthesis of diverse heterocyclic scaffolds. Chem. Eur. J. 2009, 15, 1300–1308. [Google Scholar] [CrossRef]
  14. Li, M.; Gong, F.-M.; Wen, L.-R.; Li, Z.-R. Expeditious construction of spiro-pyrrolidines by an autocatalytic one-pot, five-component, 1,3-dipolar cycloaddition of in situ generated azo-methine ylides and olefinic dipolarophiles. Eur. J. Org. Chem. 2011, 2011, 3482–3490. [Google Scholar]
  15. Doemling, A.; Herdtweck, E.; Ugi, I. The seven-component reaction. Acta Chem. Scand. 1998, 52, 107–113. [Google Scholar] [CrossRef]
  16. Elders, N.; van der Born, D.; Hendrickx, L.J.D.; Timmer, B.J.J.; Krause, A.; Janssen, E.; de Kanter, F.J.J.; Ruijter, E.; Orru, R.V.A. The efficient one-pot reaction of up to eight compo-nents by the union of multicomponent reactions. Angew. Chem. Int. Ed.Engl. 2009, 48, 5856–5859. [Google Scholar]
  17. D’Souza, D.M.; Mueller, T.J.J. Multi-component syntheses of heterocycles by transiton-metal catalysis. Chem. Soc. Rev. 2007, 36, 1095–1108. [Google Scholar] [CrossRef]
  18. Weber, L. Multi-component reactions and evolutionary chemistry. Drug Discov. Today 2002, 7, 143–147. [Google Scholar]
  19. Toure, B.B.; Hall, D.G. Natural product synthesis using multicomponent reaction strategies. Chem. Rev. 2009, 109, 4439–4486. [Google Scholar] [CrossRef]
  20. Ganem, B. Strategies for innovation in multicomponent reaction design. Acc. Chem. Res. 2009, 42, 463–472. [Google Scholar] [CrossRef]
  21. Syamala, M. Recent progress in three-component reactions. An update. Org. Prep. Proced. Int. 2009, 4, 1–68. [Google Scholar] [CrossRef]
  22. Kalinski, C.; Umkehrer, M.; Weber, L.; Kolb, J.; Burdack, C.; Ross, G. On the industrial applications of MCRs: Molecular diversity in drug discovery and generic drug synthesis. Mol. Divers. 2010, 14, 513–522. [Google Scholar] [CrossRef]
  23. Biggs-Houck, J.E.; Younai, A.; Shaw, J.T. Recent advances in multicomponent reactions for diversity-oriented synthesis. Curr. Opin. Chem. Biol. 2010, 14, 371–382. [Google Scholar] [CrossRef]
  24. Jiang, B.; Rajale, T.; Wever, W.; Tu, S.-J.; Li, G. Multicomponent reactions for the synthesis of heterocycles. Chem. Asian J. 2010, 5, 2318–2335. [Google Scholar] [CrossRef]
  25. Ruijter, E.; Scheffelaar, R.; Orru, R.V.A. Multicomponent reaction design in the quest for molecular complexity and diversity. Angew. Chem. Int. Ed. Engl. 2011, 50, 6234–6246. [Google Scholar] [CrossRef]
  26. Yu, J.; Shit, F.; Gong, L.-Z. Bronsted-acid-catalyzed asymmetric multicomponent reactions for the facile synthesis of highly enantioenriched structurally diverse nitrogenous heterocycles. Acc. Chem. Res. 2011, 44, 1156–1171. [Google Scholar] [CrossRef]
  27. Banfi, L.; Bossio, A.; Guanti, G.; Paravidino, M.; Riva, R. A new highly convergent entry to densely functionalized aziridines based on the Ugi reaction. QSAR Comb. Sci. 2006, 5–6, 457–460. [Google Scholar]
  28. Concellon, J.M.; Rodriguez-Solla, H. Synthesis and synthetic applications of α-amino ketones derived from natural α-amino acids. Curr. Org. Chem. 2008, 12, 524–543. [Google Scholar] [CrossRef]
  29. Krokotos, C.G.; McGarrigle, E.M.; Aggerwal, V.K.; Varinder, K. Sulfur ylide mediated three-component aziridination and epoxidation reactions using vinyl sulfonium salts. Synlett 2008, 2008, 2191–2195. [Google Scholar] [CrossRef]
  30. Veinberg, G.; Diskovskaya, K.; Vorona, M.; Turkovskis, I.; Kanepe, I.; Lukevics, I. Synthesis of cytotoxic derivatives of 2-oxo-1-acetidinylacetamid. Chem. Heterocycl. Compd. 2005, 41, 93–97. [Google Scholar] [CrossRef]
  31. Eckert, H.; Ugi, I. The role of isocyanides in the synthesis of β-lactam antibiotics and related compounds. In Studies in Natural Products Chemistry; Elsevier: New York, NY, USA, 1993; pp. 113–143. [Google Scholar]
  32. Mloston, G.; Celeda, M.; Linden, A.; Heimgartner, H. Two- and three-component reactions leading to new enamines derived from 2,3-dicyanobut-2-enoates. Helv. Chim. Acta 2009, 92, 1520–1537. [Google Scholar] [CrossRef]
  33. Alizadeh, A.; Babaki, M.; Zoreh, N. Solvent-free synthesis of penta-substituted pyrroles: one-pot reaction of amine, alkyl acetoacetate, and fumaryl chlorid. Tetrahedron 2009, 65, 1704–1707. [Google Scholar] [CrossRef]
  34. Attanasi, O.A.; Favi, G.; Mantellini, F.; Moscatelli, G.; Santeusanio, S. Synthesis of functionalized pyrroles via catalyst- and solvent-free sequential three-component enamine-azoene annulations. J. Org. Chem. 2011, 76, 2860–2866. [Google Scholar] [CrossRef]
  35. Kassaee, M.Z.; Masrouri, M.; Partiovi, T. One-pot four-component synthesis of tetra-substituted pyrroles. Helv. Chim. Acta 2008, 91, 227–231. [Google Scholar] [CrossRef]
  36. Marandi, G.; Maghsoodlou, M.T.; Hazeri, N.; Habibi-Khorassani, S.M.; Torbati, N.A.; Charati, F.R.; Skelton, B.W.; Makha, M. Synthesis of cyano-2,3-dihydropyrrolo[1,2-f]phenanthridine derivatives via a domino-Knoevenagel-cyclization. Mol. Divers. 2011, 15, 197–201. [Google Scholar] [CrossRef]
  37. Crovetto, L.; Rios, R. Three component, highly diastereoselective metal free synthesis of 2,3,4,5 tetrasubstituted pyrrolidines. Synlett 2008, 2008, 1840–1844. [Google Scholar]
  38. Xu, H.-W.; Li, G.-Y.; Wong, M.-K.; Che, C.-M. Asymmetric synthesis of multi-functionalized pyrrolines by a ruthenium porphyrin-catalyzed three-component coupling reaction. Org. Lett. 2005, 7, 5349–5352. [Google Scholar] [CrossRef]
  39. Balme, B. Pyrrole syntheses by multicomponent coupling reactions. Angew. Chem. Int. Ed. Engl. 2004, 43, 6238–6241. [Google Scholar] [CrossRef]
  40. Smith, N.D.; Huang, D.; Cosford, N.D.P. One-step synthesis of 3-aryl- and 3,4-diaryl-(1H)-pyrroles using tosylmethyl isocyanide (TOSMIC). Org. Lett. 2002, 4, 3537–3539. [Google Scholar] [CrossRef]
  41. Lin, X.; Mao, Z.; Dai, X.; Lu, P.; Wang, Y. A straightforward one-pot multicomponent synthesis of polysubstituted pyrroles. Chem. Commun. 2011, 47, 6620–6622. [Google Scholar] [CrossRef]
  42. Hong, D.; Zhu, Y.; Li, Y.; Lin, X.; Lu, P.; Wang, Y. Three-component synthesis of poly-substituted pyrroles from α-diazoketones, nitroalkenes, and amine. Org. Lett. 2011, 13, 4668–4671. [Google Scholar] [CrossRef]
  43. Estevez, V.; Villacampa, M.; Menendez, J.J. Multicomponent reactions for the synthesis of pyrroles. Chem. Soc. Rev. 2010, 39, 4402–4421. [Google Scholar] [CrossRef]
  44. Alizadeh, A.; Rostamnia, S.; Zhu, L.G. Competition of the R3P/DAAD and RNC/DAAD zwitterions in their production and reaction with aromatic carboxylic acids: A novel binucleo-philic system for three-component synthesis of 2-aminofurans. Synthesis 2008, 2008, 1788–1792. [Google Scholar] [CrossRef]
  45. Li, H.; Li, J.; Yan, B.; Li, Y. New domino approach for the synthesis of 2,3-disubstituted benzo[b]furans via copper-catalyzed multi-component coupling reactions followed by cyclization. Tetrahedron Lett. 2009, 50, 2353–2357. [Google Scholar] [CrossRef]
  46. Pan, H.-R.; Li, Y.-J.; Yan, C.-X.; Xing, J.; Cheng, Y. Multicomponent reaction of imidazo[1,5-a]pyridine carbenes with aldehydes and dimethyl acetylenedicarboxylate or allenoates: A straightforward approach to fully substituted furans. J. Org. Chem. 2010, 75, 6644–6652. [Google Scholar] [CrossRef]
  47. Schirok, H. Microwave-assisted synthesis of N-sec- and N-tert-alkylated indoles. Synthesis 2008, 2008, 1404–1414. [Google Scholar] [CrossRef]
  48. Simoneau, C.A.; Ganem, B. Multiple component Fischer indole reactions. Tetrahedron 2005, 61, 11374–11379. [Google Scholar] [CrossRef]
  49. Leogane, O.; Lebel, H. One-pot multicomponent synthesis of indoles from 2-iodobenzoic acid. Angew. Chem. Int. Ed. Engl. 2008, 47, 350–352. [Google Scholar] [CrossRef]
  50. Kalinski, C.; Umkehrer, M.; Schmidt, J.; Ross, G.; Kolb, J.; Burdack, C.; Hiller, W.; Hoffmann, S.D. A novel one-pot synthesis of highly diverse indole scaffolds by the Ugi/Heck reaction. Tetrahedron Lett. 2006, 47, 4683–4686. [Google Scholar] [CrossRef]
  51. Adib, M.; Mohammadi, B.; Bijanzadeh, H.R. A novel one-pot, three-component synthesis of dialkyl 5-(alkylamino)-1-aryl-1H-pyrazole-3,4-dicarboxylates. Synlett 2008, 2008, 3180–3182. [Google Scholar] [CrossRef]
  52. Zou, Y.; Wu, H.; Hu, Y.; Liu, H.; Zhao, X.; Ji, H.; Shi, D. A novel and environment-friendly method for preparing dihydropyrano[2,3-c]pyrazoles in water under ultrasound irradiation. Ultrason. Sonochem. 2011, 18, 708–712. [Google Scholar] [CrossRef]
  53. Bertozzi, F.; Gundersen, B.V.; Gustavsson, M.; Olson, R. A combinatorial scaffold approach based upon a multicomponent reaction. Org. Lett. 2003, 5, 1551–1554. [Google Scholar] [CrossRef]
  54. Sung, K.; Wu, S.H.; Chen, P.I. Facile two-pot syntheses of novel alternating benzene/imidazole systems. Tetrahedron 2002, 58, 5599–5602. [Google Scholar] [CrossRef]
  55. Heravi, M.M.; Derikwand, F.; Haghighi, M. Highly efficient, four component, one-pot synthesis of tetrasubstituted imidazoles using a catalytic amount of FeCl3x6H2. Monatsh. Chem. Chem. Mon. 2008, 139, 31–33. [Google Scholar]
  56. Han, Y.; Xie, Y.-X.; Zhao, L.-B.; Fan, M.-J.; Liang, Y.-M. Synthesis of highly substituted 2-imidazolines through a three-component coupling reaction. Synthesis 2008, 2008, 87–93. [Google Scholar] [CrossRef]
  57. Sisko, J.; Kanick, A.J.; Mellinger, M.; Filan, J.F.; Allen, A.; Olsen, M.A. An investigation of imidazole and oxazole syntheses using aryl-substituted TosMIC reagents. J. Org. Chem. 2000, 65, 1516–1524. [Google Scholar] [CrossRef]
  58. Hasaninejad, A.; Zare, A.; Shekouhy, M.; Rad, J.A. Catalyst-free one-pot four component synthesis of polysubstituted imidazoles in neutral ionic liquid 1-butyl-3-methylimidazolium bromide. J. Comb. Chem. 2010, 12, 844–849. [Google Scholar] [CrossRef]
  59. Tavakoli-Hoseini, N.; Davoodnia, A. Carbon-based solid acid as an efficient and reusable catalyst for one-pot synthesis of tetrasubstituted imidazoles under solvent-free conditions. Chinese J. Chem. 2011, 29, 203–206. [Google Scholar] [CrossRef]
  60. Masdeu, C.; Gomez, E.; Williams, N.A.O.; Lavilla, R. Double insertion of isocyanides into dihydropyridines: Direct access to substituted benzimidazolium salts. Angew. Chem. Int. Ed. Engl. 2007, 46, 3043–3046. [Google Scholar] [CrossRef]
  61. Arevalo, M.J.; Kielland, N.; Masdeu, C.; Miguel, M.; Isambert, N.; Lavilla, R. Multicomponent access to functionalized mesoionic structures based on TFAA activation of isocyanides: Novel domino reactions. Eur. J. Org. Chem. 2009, 617–625. [Google Scholar]
  62. Yoo, W.-J.; Li, C.-J. Copper-catalyzed four-component coupling between aldehydes, amines, alkynes, and carbon dioxi. Adv. Synth. Catal. 2008, 350, 1503–1506. [Google Scholar] [CrossRef]
  63. Lalli, C.; Bouma, M.J.; Bonne, D.; Masson, G.; Zhu, J. Exploiting the divergent reactivity of a-isocyanoacetate: Multicomponent synthesis of 5-alkoxyoxazoles and related heterocycles. Chem. Eur. J. 2011, 17, 880–889. [Google Scholar] [CrossRef]
  64. Kolb, J.; Beck, B.; Almstetter, M.; Heck, S.; Herdtweck, E.; Doemling, A. New MCRs: The first 4-component reaction leading to 2,4-disubstituted thiazoles. Mol. Divers. 2003, 6, 297–313. [Google Scholar]
  65. Umkehrer, M.; Kolb, J.; Burdack, C.; Hiller, W. 2,4,5-Trisubstituted thiazole building blocks by a novel multi-component reaction. Synlett 2005, 2005, 79–82. [Google Scholar]
  66. de Moliner, F.; Crosignani, S.; Galatini, A.; Riva, R.; Basso, A. Novel application of α-azido aldehydes in multicomponent reactions: Synthesis of triazolo-fused dihydrooxazinones via a passerini reaction-dipolar cycloaddition strategy. ACS Comb. Sci. 2011, 13, 453–457. [Google Scholar] [CrossRef]
  67. Akritopoulou-Zanze, I.; Gracias, V.; Djuric, S.W. A versatile synthesis of fused triazolo derivatives by sequential Ugi/alkyne-azide cycloaddition reactions. Tetrahedron Lett. 2004, 45, 8439–8441. [Google Scholar] [CrossRef]
  68. Liu, M.; Reiser, O. A copper(I) isonitrile complex as a heterogeneous catalyst for azide-alkyne cycloaddition in water. Org. Lett. 2011, 13, 1102–1105. [Google Scholar] [CrossRef]
  69. Whiting, M.; Muldroon, J.; Silverman, S.M.; Lindstrom, W.; Olson, A.J.; Kolb, H.C.; Finn, M.G.; Sharpless, K.B.; Elder, J.H.; Fokin, V.V. Inhibitors of HIV-1 protease by using in situ click chemistry. Angew. Chem. Int. Ed. Engl. 2006, 45, 1435–1439. [Google Scholar]
  70. Lutz, J.F.; Zarafshani, Z. Efficient construction of therapeutics, bioconjugates, biomaterials, and bioactive surfaces using azide-alkyne “click” chemist. Adv. Drug Deliv. Rev. 2008, 60, 958–970. [Google Scholar] [CrossRef]
  71. Gil, M.V.; Arevalo, M.J.; Lopez, O. Click chemistry: What’s in a name? Triazol synthesis and beyond. Synthesis 2007, 2007, 1589–1620. [Google Scholar] [CrossRef]
  72. Wang, M.-Z.; Xu, H.-W.; Liu, Y.; Wong, M.-K. Stereoselective synthesis of multi-functionalized 1,2,4-triazolidines by a ruthenium porphyrin-catalyzed three-component coupling reaction. Adv. Synth. Catal. 2006, 348, 2391–2396. [Google Scholar] [CrossRef]
  73. Castanedo, G.M.; Seng, P.S.; Blaquiere, N.; Trapp, S.; Staben, S.T. Rapid synthesis of 1,3,5-substituted 1,2,4-triazoles from carboxylic acids, amidines, and hydrazine. J. Org. Chem. 2011, 76, 1177–1179. [Google Scholar] [CrossRef]
  74. Kundu, D.; Majee, A.; Hajra, A. Indium triflate-catalyzed one-pot synthesis of 1-substituted-1H-1,2,3,4-tetrazoles under solvent-free conditions. Tetrahedron Lett. 2009, 50, 2668–2670. [Google Scholar] [CrossRef]
  75. Marcos, C.M.; Marcaccini, S.; Menchi, G.; Pepino, R.; Torroba, T. Studies on isocyanides: Synthesis of tetrazolyl-isoindolinones via tandem Ugi four-component condensation / intra-molecular amidation. Tetrahedron Lett. 2008, 49, 149–152. [Google Scholar] [CrossRef]
  76. Kaim, L.; Grimaud, L.; Patil, P. Three-component strategy toward 5-membered heterocycles from isocyanide dibromides. Org. Lett. 2011, 13, 1261–1263. [Google Scholar] [CrossRef]
  77. Bossio, R.; Marcos, C.F.; Marcaccini, S.; Pepino, R. A novel synthetic route to 1,6-dihydro-6-oxopyridine-2-carboxylic acid derivatives. Heterocycles 1997, 45, 1589–1592. [Google Scholar] [CrossRef]
  78. Tu, S.-J.; Zhang, X.H.; Han, Z.-G.; Cao, X.D.; Wu, S.-S.; Yan, S.; Hao, W.-J.; Zhang, G.; Ma, N. Synthesis of isoxazolo[5,4-b]pyridines by microwave-assisted multi-component reactions in water. J. Comb. Chem. 2009, 11, 428–432. [Google Scholar] [CrossRef]
  79. Kumar, A.; Sharma, S. A grinding-induced catalyst- and solvent-free synthesis of highly functionalized 1,4-dihydropyridines via a domino multicomponent reaction. Green Chem. 2011, 13, 2017–2020. [Google Scholar] [CrossRef]
  80. Balamurugan, K.; Perumal, S.; Menendez, J.C. New four-component reactions in water: A convergent approach to the metal-free synthesis of spiro[indoline/acenaphthylene-3,40-pyrazolo[3,4-b]pyridine derivatives. Tetrahedron 2011, 67, 3201–3208. [Google Scholar] [CrossRef]
  81. Shi, D.-Q.; Yang, F.; Nib, S.N. A facile synthesis of furo[3,4-e]pyrazolo[3,4-b]pyridine-5(7H)-one derivatives via three-component reaction in ionic liquid without any catalyst. J. Heterocycl. Chem. 2009, 46, 469–476. [Google Scholar] [CrossRef]
  82. Zhang, X.; Li, D.; Fan, X.; Wang, X.; Li, X.; Qu, G.; Wang, J. Ionic liquid-promoted multi-component reaction: novel and efficient preparation of pyrazolo[3,4-b]pyridinone, pyrazolo[3,4-b]-quinolinone and their hybrids with pyrimidine nucleoside. Mol. Divers. 2010, 14, 159–167. [Google Scholar] [CrossRef]
  83. Zare, L.; Mahmoodi, O.; Yahyazadeh, A.; Mamaghani, M. Convenient ultrasound-promoted regioselective synthesis of fused 6-amino-3-methyl-4-aryl-1H-pyrazolo[3,4-b]pyridine-5-carbonitrile. Synth. Commun. 2011, 41, 2323–2330. [Google Scholar] [CrossRef]
  84. Shaabani, A.; Ghadari, R.; Beheshdi, S.; Sarvary, A.; Rezayan, A.H. Synthesis of highly functionalized bis(4H-chromene) and 4H-benzo[g]chromene derivatives via an isocyanide-based pseudo-five-component Reaction. J. Org. Chem. 2009, 74, 4372–4374. [Google Scholar] [CrossRef]
  85. Ohta, Y.; Oishi, S.; Fujii, N.; Ohno, H. Facile synthesis of 3-(aminomethyl)isoquinolines by copper-catalysed domino four-component coupling and cyclisation. Chem. Comm. 2008, 835–837. [Google Scholar]
  86. Adib, M.; Sayahi, M.-H.; Nosrati, M.; Zhu, L.-G. A novel, one-pot, three-component synthesis of 4H-pyrido[1,2-a]pyrimidines. Tetrahedron Lett. 2007, 48, 4195–4198. [Google Scholar] [CrossRef]
  87. Bararjanian, M.; Balalaie, S.; Rominer, F.; Barouti, S. A novel and efficient one-pot synthesis of 2-aminopyrimidinones and their self-assembly. Helv. Chim. Acta 2010, 93, 777–784. [Google Scholar] [CrossRef]
  88. Shen, S.; Zhang, H.; Yang, W.; Yu, C.; Yao, C. One-pot combinatorial synthesis of benzo[4,5]-imidazo-[1,2-a]thiopyrano[3,4-d]pyrimidin-4(3H)-one derivatives. Chin. J. Chem. 2011, 29, 1727–1731. [Google Scholar] [CrossRef]
  89. AIlyin, A.P.; Trifilenkov, A.S.; Kurashvili, I.D.; Krasavin, M.; Ivachtchenko, A.V. One-step construction of peptidomimetic 5-carbamoyl-4-sulfonyl-2-piperazinones. J. Comb. Chem. 2005, 7, 360–363. [Google Scholar] [CrossRef]
  90. Werner, S.; Nielsen, S.D.; Wipf, P.; Turner, D.M.; Chambers, P.G.; Geib, S.J.; Curran, D.P.; Zhang, W. Fluorous parallel synthesis of a piperazinedione-fused tricyclic compoundl library. J. Comb. Chem. 2009, 11, 452–459. [Google Scholar] [CrossRef]
  91. Domling, A.; Huang, Y. Piperazine scaffolds via isocyanide-based multicomponent reactions. Synthesis 2010, 2010, 2859–2883. [Google Scholar] [CrossRef]
  92. Kanagarajan, V.; Sureshkumar, P.; Thanusu, J.; Gopalakrishnan, M. Environmentally safe one-pot solvent-free synthesis of 6-aryl-1,2,4,5-tetrazinane-3 thiones(ones) catalyzed by NaHSO4-SiO2. Russ. J. Org. Chem. 2009, 45, 1707–1713. [Google Scholar]
  93. Lezinska, P.; Corres, N.; Moreno, D.; Garcia-Valverde, M.; Marcaccini, S.; Torroba, T. Synthesis of pseudopeptidic (S)-6-amino-5-oxo-1,4-diazepines and (S)-3-benzyl-2-oxo-1,4-benzodiazepines by an Ugi 4CC Staudinger/aza-Wittig sequence. Tetrahedron 2010, 66, 6783–6788. [Google Scholar] [CrossRef]
  94. Souldozi, A.; Bouslimani, N.; Welter, R. The reaction of (N-isocyanimino)triphenylphos-phorane with dialkyl acetylenedicarboxylates in the presence of 1,3-diphenyl-1,3-propanedione: A novel three-component reaction for the stereoselective synthesis of dialkyl (Z)-2-(5,7-diphenyl-1,3,4-oxadiazepin-2-yl)-2-butenedioates. Tetrahedron Lett. 2007, 48, 2617–2620. [Google Scholar] [CrossRef]
  95. Cyr, D.C.; Martin, N.; Arndtsen, B.A. Direct synthesis of pyrroles from Imines, alkynes, and acid chlorides: An isocyanide-mediated reaction. Org. Lett. 2007, 9, 449–452. [Google Scholar] [CrossRef]
  96. Sharma, U.; Shahadat, A.; Boruah, R.C. A facile synthesis of annelated pyridines from β-formyl enamides under microwave irradiation. Tetrahedron Lett. 2000, 41, 3493–3495. [Google Scholar] [CrossRef]
  97. Wang, Q.; Song, X.; Yan, C. Application of malononitrile in multicomponent reactions. Huaxue Jinzhan 2009, 21, 997–1007. [Google Scholar]
  98. Bonne, D.; Coquerel, Y.; Constantieux, T.; Rodriguez, J. 1,3-Dicarbonyl compounds in stereo-selective domino and multicomponent reactions. Tetrahedron: Asymmetry 2010, 21, 1085–1109. [Google Scholar]
  99. Duque, M.; Allais, C.; Isambert, N.; Constantieux, T.; Rodriguez, J. β-Diketo building blocks for MCRs-based syntheses of heterocycles. Top. Heterocycl. Chem. 2010, 23, 227–277. [Google Scholar] [CrossRef]
  100. Matache, M.; Dobrota, C.; Bogdan, N.D.; Funeriu, D.P. Recent developments in the reactivity of the Biginelli compounds. Curr. Org. Synth. 2011, 8, 356–373. [Google Scholar] [CrossRef]
  101. Sun, J.; Wu, Q.; Xia, E.-Y.; Yan, C.G. Molecular diversity of three-component reactions of aromatic aldehydes, arylamines, and acetylenedicarboxylate. Eur. J. Org. Chem. 2011, 2011, 2981–2986. [Google Scholar] [CrossRef]
  102. Choudhury, L.H.; Parvin, T. Recent advances in the chemistry of imine-based multicomponent reactions (MCRs). Tetrahedron 2011, 67, 8213–8228. [Google Scholar] [CrossRef]
  103. El Kaim, L.; Grimaud, L. Beyond the Ugi reaction: Less conventional interactions between isocyanides and iminium species. Tetrahedron 2009, 65, 2153–2171. [Google Scholar] [CrossRef]
  104. Ivachtchenko, A.V.; Ivanenkov, Y.A.; Kysil, V.M.; Krasavin, M.Y.; Ilyin, A.P. Multi-component reactions of isocyanides in the synthesis of heterocycles. Russ. Chem. Rev. 2010, 79, 787–817. [Google Scholar] [CrossRef]
  105. Elders, N.; Ruijter, E.; Nenajdenko, V.G.; Orru, R.V.A. α-Acidic isocyanides in multicomponent chemistry. Top. Heterocycl. Chem. 2010, 23, 129–159. [Google Scholar] [CrossRef]
  106. Sadjadi, S.; Heravi, M.M. Recent application of isocyanides in synthesis of heterocycles. Tetrahedron 2011, 67, 2707–2752. [Google Scholar] [CrossRef]
  107. Heravi, M.M.; Moghimi, S. Catalytic multicomponent reactions based on isocyanides. J. Iran. Chem. Soc. 2011, 8, 306–373. [Google Scholar] [CrossRef]
  108. de Moliner, F.; Banfi, L.; Riva, R.; Basso, A. Beyond Ugi and Passerini reactions. Multi-component approaches based on isocyanides and alkynes as an efficient tool for diversity oriented synthesis. Comb. Chem. High Throughput Screen. 2011, 14, 782–810. [Google Scholar]
  109. Shaabani, A.; Maleki, A.; Rezayan, A.H.; Sarvary, A. Recent progress of isocyanide-based multicomponent reactions in Iran. Mol. Divers. 2011, 15, 41–68. [Google Scholar] [CrossRef]
  110. Cotarca, L.; Eckert, H. Phosgenations—A Handbook; Wiley-VCH: Weinheim, Germany, 2004; pp. 395–431. [Google Scholar]
  111. Eckert, H.; Auerweck, J. Solvent-free and safe process for the quantitative production of phosgene from triphosgene by deactivated imino-based catalysts. Org. Process Res. Dev. 2010, 14, 1501–1505. [Google Scholar] [CrossRef]
  112. Eckert, H. Phosgenation reactions with phosgene from triphosgene. Chim. OGGI 2011, 29, 40–46. [Google Scholar]
  113. Pirrung, M.C.; Ghorai, S.; Ibarra-Rivera, T.R. Multicomponent reactions of convertible isonitriles. J. Org. Chem. 2009, 74, 4110–4117. [Google Scholar] [CrossRef]
  114. Masson, G.; Neuville, L.; Bughin, C.; Fayol, A.; Zhu, J. Multicomponent syntheses of macrocycles. Top. Heterocycl. Chem. 2010, 25, 1–24. [Google Scholar] [CrossRef]
  115. Wessjohann, L.A.; Rivera, D.G.; Vercillo, O.E. Multiple multicomponent macrocyclisations (MiBs): A strategic development toward macrocycle diversity. Chem. Rev. 2009, 109, 796–814. [Google Scholar] [CrossRef]
  116. Kumaravel, K.; Vasuki, G. Multicomponent reactions in water. Curr. Org. Chem. 2009, 13, 1820–1841. [Google Scholar] [CrossRef]
  117. Isambert, N.; Duque, M.; del Mar, S.; Plaquevent, J.-C.; Genisson, Y.; Rodriguez, J.; Constantieux, T. Multicomponent reactions and ionic liquids: A perfect synergy for eco-compatible heterocyclic synthesis. Chem. Soc. Rev. 2011, 40, 1347–1357. [Google Scholar] [CrossRef]
  118. Hugel, H.M. Microwave multicomponent synthesis. Molecules 2009, 14, 4936–4972. [Google Scholar] [CrossRef]
  119. Jiang, B.; Shi, F.; Tu, S.-J. Microwave-assisted multicomponent reactions in the heterocyclic chemistry. Curr. Org. Chem. 2010, 14, 357–378. [Google Scholar] [CrossRef]
  120. Kruithof, A.; Ruijter, E.; Orru, R.V.A. Microwave-assisted multicomponent synthesis of heterocycles. Curr. Org. Chem. 2011, 15, 204–236. [Google Scholar] [CrossRef]
  121. Kadam, A.; Zhang, Z.; Zhang, W. Microwave-assisted fluorous multicomponent reactions. A combinatorial chemistry approach for green organic synthesis. Curr. Org. Synth. 2011, 8, 295–309. [Google Scholar] [CrossRef]
  122. Miranda, R.; Noguez, O.; Velasco, B.; Arroyo, G.; Penieres, G.; Martinez, J.O.; Delgado, F. Infrared irradiation: An alternative for reaction activation and its contribution to green chemistry. Educ. Quim. 2009, 20, 421–425. [Google Scholar]

Share and Cite

MDPI and ACS Style

Eckert, H. Diversity Oriented Syntheses of Conventional Heterocycles by Smart Multi Component Reactions (MCRs) of the Last Decade. Molecules 2012, 17, 1074-1102. https://doi.org/10.3390/molecules17011074

AMA Style

Eckert H. Diversity Oriented Syntheses of Conventional Heterocycles by Smart Multi Component Reactions (MCRs) of the Last Decade. Molecules. 2012; 17(1):1074-1102. https://doi.org/10.3390/molecules17011074

Chicago/Turabian Style

Eckert, Heiner. 2012. "Diversity Oriented Syntheses of Conventional Heterocycles by Smart Multi Component Reactions (MCRs) of the Last Decade" Molecules 17, no. 1: 1074-1102. https://doi.org/10.3390/molecules17011074

Article Metrics

Back to TopTop