Hot Ductility Loss in a Fe-Ni-Based Superalloy
Abstract
:1. Introduction
2. Experimental Procedure
Element | Fe | Ni | Cr | Ti | Mn | Mo | Si | V | Al | Cu | C | P | S |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
wt. % | Balance | 25.0 | 14.3 | 1.78 | 1.47 | 1.27 | 0.51 | 0.34 | 0.10 | 0.20 | 0.04 | 0.02 | <0.01 |
3. Results and Discussion
Element | Fe | Ni | Cr | Ti | Mn | Si | Al | O | C | P | S |
---|---|---|---|---|---|---|---|---|---|---|---|
wt. % | 40.18 | 21.04 | 12.39 | 22.67 | - | - | 0.25 | 1.87 | 1.59 | <0.01 | <0.01 |
Site | Fe | Ni | Cr | Ti | Mn | Si | V | P | S |
---|---|---|---|---|---|---|---|---|---|
A | 2.75 | 0.78 | 0.57 | 95.38 | - | - | - | 0.18 | 0.31 |
B | 55.05 | 33.06 | 11.41 | 0.19 | - | - | 0.07 | - | 0.19 |
4. Conclusions
Acknowledgments
Author Contributions
Conflicts of Interest
References
- Kobayashi, K.; Yamaguchi, K.; Hayakawa, M.; Kimura, M. High-temperature fatigue properties of austenitic superalloys 718, A286 and 304L. Int. J. Fatigue 2008, 30, 1978–1984. [Google Scholar] [CrossRef]
- De Cicco, H.; Luppo, M.I.; Raffaeli, H.; di Gaetano, J.; Gribaudo, L.M.; Ovejero-García, J. Creep behavior of an A286 type stainless steel. Mater. Charact. 2005, 55, 97–105. [Google Scholar] [CrossRef]
- De Cicco, H.; Luppo, M.I.; Gribaudo, L.M.; Ovejero-Garcı́a, J. Microstructural development and creep behavior in A286 superalloy. Mater. Charact. 2004, 52, 85–92. [Google Scholar] [CrossRef]
- Rho, B.S.; Hong, H.U.; Nam, S.W. Analysis of the intergranular cavitation of Nb-A286 alloy in high temperature low cycle fatigue using EBSD technique. Scr. Mater. 2000, 43, 167–173. [Google Scholar]
- Chang, C.-M. Effect of Minor Elements on the Hot Deformation Behaviours of a Superalloy. Master Thesis, National Tsing-Hua University, Hsinchu, Taiwan, 2014. [Google Scholar]
- Hansson, K.; Droujevski, M.; Fredriksson, H. Hot ductility of an Fe-10%Ni alloy during penetration of copper. Scand. J. Metall. 2002, 31, 256–267. [Google Scholar] [CrossRef]
- Heo, N.H. Sulfur segregation and intergranular fracture in α-iron. Scr. Mater. 2004, 51, 339–342. [Google Scholar] [CrossRef]
- Mostefa, L.B.; Saindrenan, G.; Solignac, M.P.; Colin, J.P. Effect of interfacial sulfur segregation on the hot ductility drop of Fe-Ni36 alloys. Acta Metall. et Mater. 1991, 39, 3111–3118. [Google Scholar] [CrossRef]
- Osinkolu, G.A.; Kobylanski, A. The role of titanium additions on hot ductility of high purity iron base alloys. Scr. Metall. 1987, 21, 243–247. [Google Scholar] [CrossRef]
- Yu, Y.; Chen, W.; Zheng, H. Research on the hot ductility of Fe-36Ni invar alloy. Rare Met. Mater. Eng. 2014, 43, 2969–2973. [Google Scholar]
- Abbasi, S.M.; Morakabati, M.; Mahdavi, R.; Momeni, A. Effect of microalloying additions on the hot ductility of cast FeNi36. J. Alloys Compd. 2015, 639, 602–610. [Google Scholar] [CrossRef]
- Santillana, B.; Boom, R.; Eskin, D.; Mizukami, H.; Hanao, M.; Kawamoto, M. High-temperature mechanical behavior and fracture analysis of a low-carbon steel related to cracking. Metall. Mater. Trans. A 2012, 43, 5048–5057. [Google Scholar] [CrossRef]
- Ducki, K.J.; Hetmańczyk, M.; Kuc, D. Analysis of the precipitation process of the intermetallic phases in a high-temperature Fe-Ni austenitic alloy. Mater. Chem. Phys. 2003, 81, 490–492. [Google Scholar] [CrossRef]
- El-Eskandarany, M.S. Structure and properties of nanocrystalline TiC full-density bulk alloy consolidated from mechanically reacted powders. J. Alloys Compd. 2000, 305, 225–238. [Google Scholar] [CrossRef]
- Yoo, K.-B.; Kim, J.-H. Effects of impurity segregation to grain boundary on intergranular cracking in 2.25Cr-1W steel. Procedia Eng. 2011, 10, 2484–2489. [Google Scholar] [CrossRef]
- Zhao, M.J.; Guo, Z.F.; Liang, H.; Rong, L.J. Effect of boron on the microstructure, mechanical properties and hydrogen performance in a modified A286. Mater. Sci. Eng. A 2010, 527, 5844–5851. [Google Scholar] [CrossRef]
© 2015 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution license (http://creativecommons.org/licenses/by/4.0/).
Share and Cite
Li, C.-W.; Yeh, A.-C.; Chen, C.-S.; Wang, W.-R. Hot Ductility Loss in a Fe-Ni-Based Superalloy. Metals 2015, 5, 2428-2434. https://doi.org/10.3390/met5042428
Li C-W, Yeh A-C, Chen C-S, Wang W-R. Hot Ductility Loss in a Fe-Ni-Based Superalloy. Metals. 2015; 5(4):2428-2434. https://doi.org/10.3390/met5042428
Chicago/Turabian StyleLi, Chen-Wei, An-Chou Yeh, Chi-San Chen, and Woei-Ren Wang. 2015. "Hot Ductility Loss in a Fe-Ni-Based Superalloy" Metals 5, no. 4: 2428-2434. https://doi.org/10.3390/met5042428