This article is
- freely available
Synthesis of a Molecularly Imprinted Polymer for Dioxin
Laboratorio di Chimica Analitica, Dipartimento di Scienza dei Materiali, Università degli Studi di Lecce, Palazzina M, Via Monteroni, 73100 Lecce (Italy)
Dipartimento di Ingegneria dell’Innovazione, Università degli Studi di Lecce, Via Arnesano, 73100 Lecce (Italy)
* Author to whom correspondence should be addressed.
Received: 28 April 2006 / Accepted: 28 June 2006 / Published: 24 August 2006
Abstract: A molecularly imprinted polymer for recognising selectively 2,3,7,8-tetrachlorodibenzodioxin (TCDD) was made by a new non-covalent method employing a“dummy” template. The proposed way represents a simplification of a synthetic schemeproposed by Lübke et al. for covalent imprinting. Comparison of extraction yields of thenovel polymer, a non imprinted polymer and an imprinting polymer, prepared by theoriginal procedure demonstrates the binding capacity of the proposed polymer, which is inprinciple applicable to solid phase extraction (SPE) of dioxin.
Keywords: Molecularly imprinted polymers; non-covalent approach; 2; 3; 7; 8-tetrachlorodibenzodioxin.
Article StatisticsClick here to load and display the download statistics.
Notes: Multiple requests from the same IP address are counted as one view.
Cite This Article
MDPI and ACS Style
Malitesta, C.; Picca, R.A.; Ciccarella, G.; Sgobba, V.; Brattoli, M. Synthesis of a Molecularly Imprinted Polymer for Dioxin. Sensors 2006, 6, 915-924.
Malitesta C, Picca RA, Ciccarella G, Sgobba V, Brattoli M. Synthesis of a Molecularly Imprinted Polymer for Dioxin. Sensors. 2006; 6(8):915-924.
Malitesta, Cosimino; Picca, Rosaria A.; Ciccarella, Giuseppe; Sgobba, Vito; Brattoli, Magda. 2006. "Synthesis of a Molecularly Imprinted Polymer for Dioxin." Sensors 6, no. 8: 915-924.